• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.294-295
• /
• 2011

본 논문에서는 스마트폰의 카메라와 플래시를 이용한 Shape from Shading 방법으로 3차원 형상 취득을 위한 카메라와 플래시의 보정 기법을 제시한다. 영상에서 관찰되는 화소 값은 카메라의 반응곡선에 의해 비선형적으로 표현되고 렌즈의 왜곡으로 인해 3차원 형상 복원에 오차를 발생 시킨다. 기하학적(geometric) 보정과 방사량(radiometric) 보정, 플래시 보정을 수행함으로써 3차원 형상 복원의 오차를 줄인다.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.36.3-37
• /
• 2016

ECS(Error Compensation Software)는 알루미늄 자유곡면 반사경의 형상정밀도를 향상시키기 위해 개발된 보정가공 소프트웨어이다. DTM(Diamond Turning Machine)을 이용한 가공공정에서 가공오차의 변화를 쉽게 확인하며 형상을 보정할 수 있도록 설계되었다. 보정가공 공정은 (1) 10차 다항식을 이용하여 표면을 설계한 후 DTM에 입력할 가공경로 계산, (2) DTM에 가공경로를 입력하여 가공, (3) 3차원 초정밀 형상측정 장비로 반사경의 가공오차 분석, (4) 가공오차를 보정하여 새로운 10차 다항식 설계, (5) 보정가공경로 계산 후 재가공으로 이루어진다. 그동안의 공정은 다항식의 설계, 가공경로 계산, 반사경의 가공오차 분석을 위해 다수의 프로그램들을 실행해야만 했다. 본 연구에서는 ECS가 알루미늄 자유곡면 반사경 제작을 위한 통합 보정가공 소프트웨어를 제공하여, 사용자가 작업을 효율적으로 수행하기를 기대한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1923-1928
• /
• 2017

This paper is a study on error correction for three-dimensional shape reconstruction based on factorization method. The existing error correction method based on factorization has a limitation of correction because it is optimized globally. Thus in this paper, we propose our new method which can find and correct the only major error influence factor toward three-dimensional reconstructed shape instead of global approach. We define the error-influenced factor in two-dimensional re-projection deviation space and directly control the error components. In addition, it is possible to improve the error correcting performance by recursively applying the above process. This approach has an advantage under noise because it controls the major error components without depending on any geometric information. The performance evaluation of the proposed algorithm is verified by simulation with synthetic and real image sequence to demonstrate noise robustness.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.3 no.1
• /
• pp.16-20
• /
• 2012

During construction of the cable-stayed bridge, not only shape of deck and pylon but also cable forces are main factors for geometry control. Especially, geometry control of deck must be controlled for adjusting design value of vertical and lateral alignment as well as closing of key segment. Also, both the deck level error and cable force error occur necessarily during the construction stage in cable stayed bridge. The errors are caused by different of material properties and computer modeling, and construction mistake, and so on. These causes bring about that the forces of cable and the displacement of deck show different tendency from the theoretical values. Therefore, these errors must necessarily be adjusted and can be improved through adjustment of cable length. In this study, a new optimization tool is proposed to adjust the errors of the second Dolsan cable-stayed bridge.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1542-1551
• /
• 1990

This paper shown how to measure the machining error in diameter of cylindrical workpiece and compensate the measured machining error in NC turning. Machining error is measured by the electric micrometer mounted on the tool post with the NC part program for probe location path analyzed. Correct NC part program for finish turning is automatically generated to compensate the measured machining error. These concepts have been effectively introduced to a newly developed software for error compensation. In turning experiments with the developed error compensation system, machining error was almost within the specified tolerance, which reveals the effectiveness of the developed system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.126-134
• /
• 1999

In this paper, a new error compensating technique for form-error compensation of rough-surface profile obtained by contact stylus profilometer is proposed. By the method, the real contact points of rough-surface and diamond stylus can be estimated and the measured profile data corrected. To verify the compensation effect, the properties(Ra, RMS, Kurtosis, Skewness) of measured profile data and compensated data were compared. And, the cumulative RMS slope was proposed to assess the compensated effect of upper area of profile. The results show that the measuring error could be compensated very well in amplitude parameters and in proposed cumulative RMS slope by the developed form-error compensating technique.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.154-155
• /
• 2003

PMP(Phase Measuring Profilometry)측정법은 투영계와 기록계의 기하학적 구성과 광학계의 정렬적인 문제에 의해서 기본적으로 오차를 가지고 측정된다. 일반적으로 PMP 형상 측정에서 측정면과 광학계의 높이가 피 측정면에 비해서 상당히 큰 경우, CCD 카메라에서 높이 방향으로 측정영역이 작아지게됨으로써 측정위상이 기준면에서의 위치와 높이 방향에 따라서 다르게 나타나고 프로젝터가 측정면에 투영되는 간섭무의의 피치가 다르게 적용된다. (중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.598-603
• /
• 2019

Three-dimensional shape measurement technology is used in various industries. Among them, optical three-dimensional shape measurement techniques based on the optical trigonometry are mainly used in the field of semiconductor product inspection, where large quantities of three-dimensional shape measurements are made daily in factories and fine measurements are also required. The light source and the drive circuit, which are components of three-dimensional measurement equipment based on this optical trigonometry, produce heat generated by prolonged operation, and may be exposed to conditions where the ambient temperature is not constant, resulting in temperature-induced measurement errors. In this study, the compensation method of the Thermal Errors for Phase Measuring Profilometry is proposed. Three-Dimensional Shape Measurement Equipment based on Phase Measuring Profilometry is implemented to measure the height of an object and ambient temperature for 10 Hours, and a regression line was obtained line by making simple linear regression using measured temperature and height values. This regression line was used to correct the error of the height measurement according to the temperature, and thermal error was from 139.88 um(Micrometer) to 13.12 um.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.41.4-41
• /
• 2004

본 발표에서는, 초정밀 연마기의 고성능화와 자동화를 위한 개념설계, 적절한 요소부품의 선택, 그리고 연마공정제어 및 형상오차보정 기술에 대해 설명한다. 초정밀 Polishing 공정이 기존의 개념과는 달리 표면품질의 개선 외에 형상정밀도의 유지 또는 향상 측면에서 기술적 접근이 요구되는 사실에 대해 초점을 맞추었다. 이제 초정밀 연마기는 Nano-meter 수준의 표면 품질과 동시에 형상정밀도 달성의 가능성을 열고 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.127-127
• /
• 2003