• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.570-579
• /
• 2004

정상상태 압연공정의 오일러리안 공정해석 모델에 관한 연구들을 종합 정리하였다 본 연구의 유한요소해석 모델은 집합조직의 발전에 따른 이방성과 미세기공의 성장에 따른 기계적 성질의 열성화를 평형방정식에 직접 결합하였다 따라서 집합조직의 발전 및 기공률의 변화를 예측하고 동시에 이방성과 기계적성질의 열성화를 해석에 반영할 수 있다. 더불어 오일러리안 해석에서 형상예측을 위하여 자유곡면 수정법과 유선추적법을 유한요소해석 모델에 결합하였다 본 연구의 공정해석 모델을 평판 압연, 클래드압연, 삼차원 사각단면봉의 압연 및 형상압연에 적용하여 집합 조기의 발전, R-값, 항복곡면, 결함성장 등의 기계적성질의 변화 예측과 클래드 압연시에 이중재 접촉면 형상, 배불림, 형상압연 시의 단면변화 등의 형상변화 예측을 보여주었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.855-861
• /
• 2011

We predict the rolled-strip profile for a 6-high mill using thin rolling theory and a numerical model. In the numerical model, we calculate the distributions of the contact pressures between the rolls and the rolling pressure between the strip and the work roll in the transverse direction using the geometric structure of the 6-high mill and the boundary conditions. We determine the distribution of the rolling pressure in the rolling direction via a thin-foil rolling model using Fleck's theory. We calculate the three-dimensional elastic deformation of the work roll using the pressures of the width and rolling directions. We then obtain the three-dimensional strip profile via the elastic deformation of the work roll during the rolling process. The profile is verified by a thin cold-rolling test and FE simulation.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2869-2871
• /
• 1999

본 연구는 포항제철 STS 냉연공장의 형상 제어에 관한 것이다 당사의 냉간 압연기는 Sendzimir mill로서 상하 롤(Roll)이 10단씩 구성된 20단 압연기이다. 본 압연기에 의한 575 냉연강판의 형상제어는 현재 조업자의 수동운전으로 구동되고 있으며 구동기는 AS_U Roll 8 개와 Intermediate Roll 2 개의 10 개로 구성되어 있다. 구동기의 특성은 solenoid 형태와 유압식으로서 응답성이 빠르지 뭇하다. 본 연구는 위와 같은 특성을 지닌 냉간 압연기를 가지고 퍼지 제어에 의한 자동제어의 구현에 관한 것이다. 본 연구에 사용된 퍼지 제어기는 형상 강판의 두께 Roll 속도, AS_U Roll과 IMR의 현 위치 강종 강판의 폭, 강판의 장력 등의 입력을 고려하여 제어기의 출력인 AS_U Roll 8 개의 위치 값과 IMR 2 개의 위치 값을 결정한다. 현재 실 프로세서에 적용중이며 형상제어 정도가 양호하다. 본 연구의 효과는 형상제어의 자동화 및 형상 정도 향상을 통한 조업 안정화에 있다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.265-268
• /
• 1999

열간 박판 압연공정에서의 압연하중 압연동력을 실시간으로 계산할 수 있는 모델식을 유한요소 해석결과들을 이용하여 개발하였다 압연하중 압연동력값 결정에 비교적 큰 영향을 주는 인자들로는 형상계수 압하률, 률직경 률속도 스트립 입측온도, 탄소함량, 마찰계수들은 이론적으로 계산이 가능한 무마찰의 균일 평면 변형유 압축공정의 금형하중(F、) 동력 (P、)식을 도입함으로써 내삽모델식에서 제외시킬수 있었다 쿨롱마찰계수($\mu$) 0.3 일 경우의 유한요소해석 결과 데이터들을 내삽법(interpolation)을 통해서 다항식 형태로 {{{{ {F } over {F、 } }}}}, {{{{ { {P }_{f } } over { {P }_{d } } }}}}, {{{{ { {P }_{d } } over { {P }^{、 } } }}}} 식들을 구하였다 마찰계수에 따른{{{{ {F } over {F、 } }}}} {{{{ {P } over { {P }^{、 } } }}}}값의 변화는 형상계수에 따라 기울기가 결정되는 직선 형태로 나타내어짐을 유한요소해석 결과로부터 관찰 할 수 있었다. 이와같이 구한 압연하중 압연동력 모델식의 유효성을 검증하기 위해 무작위로 추출한 실제공정들에서 모델식으로 계산한 압연하중 압연동력 값들을 유한요소해석결과와 서로 비교해 보았다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1117-1125
• /
• 2013

A finite element based approach that can be used to investigate the plane-view shape and crop loss of a material during plate rolling is presented. We employed a three-dimensional finite element model to continuously simulate the shape change of the head and tail of a plate as the number of rolling passes increases. The main feature of the proposed model lies in the fact that the multistage rolling can be simulated without a break because the rolling direction of the material is reversibly controlled as the roll gap sequentially decreases. The material constants required in the finite element analysis were experimentally obtained by hot tensile tests. We also performed a pilot hot plate rolling test to verify the usefulness of the proposed finite element model. Results reveal that the computed plane-view shapes as well as crop losses by the proposed finite element model were in good agreement with the measured ones. The crop losses predicted by the proposed model were within 5% of those measured from the pilot hot plate rolling test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.634-641
• /
• 2001

Shape memory alloy has been used to improve the tensile strength of composite by the occurrence of compressive residual stress in matrix using its shape memory effect. In order to fabricate shape memory alloy composite, TiNi alloy and A16061 were used as reinforcing material and mix, respectively. In this study, TiNi/A16061 shape memory alloy composite was made by using hot press method. However, the specimen fabricated by this method had the bonding problem at the boundary between TiNi fiber and Al matrix when the load was applied to it. A cold rolling was imposed to the specimen to improve the bonding effect. It was found that tensile strength of specimen subjected to cold rolling was more increased than that of specimen which did not underwent cold rolling. In addition, acoustic emission technique was used to quantify the microscopic damage behavior of cold rolled TiNi/A16061 shape memory alloy composite at high temperature.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.257-266
• /
• 1993

Computer Simulation based of divided element method was done to predict strip shape in20-high Sendzimir Mill and has been used to find a way for preventing quarter waves occurring in the wide and thin gaged strip rolling. The simulation showed that it was difficult to prevent quarter waves by the existing methods of controlling actuators such as the shifting of the first intermediate roll and the profile control of As-U-Roll in back up roll. It was, however, confirmed analytically and experimentally that quarter waves could be effectively reduce by changing taper mode at the barrel-end taper radius of the first intermediate roll.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.511-517
• /
• 2009

In this paper an finite element approach for the edge crack analysis of silicon-steel sheet during cold rolling is presented. Based on the damage mechanics, the proposed approach follows the analysis steps which are composed of damage initiation, damage evolution and fracture. Through those steps, we can find out the initiation instant of crack and resulting propagated length and shape of the crack. The material constants related to fracture is experimentally obtained by tension tests using standard sheet-type specimen and notched sheet-type specimen. To evaluate the prediction accuracy, we performed a pilot rolling test with a initially notched sheets. It is shown that the results obtained by the approach converged to the experimental one concerning about the direction and length of propagated crack. The capability of the proposed one is demonstrated through the application to the actual silicon-steel rolling mill.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.328-331
• /
• 2001

Shape changes of a workpiece in an Eulerian Finite Element analysis for the steady state. three-roll-stand shape rolling are modelled. Although an Eulerian analysis has many advantages for the steady state rolling problems, it necessitates an assumption about the unknown shape of the control volume. In almost all cases. the assumed control volume does not match the final shape and the control volume should be updated. This update can be accomplished by performing a free surface correction. The final shape of a material point, which has a spherical shape at the inlet, can be also predicted by integrating a deformation gradient along a stream line. Analyses of three-roll-stand shape rolling is in detail examined.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.06a
• /
• pp.89-94
• /
• 2004

Profile ring rolling process for large slewing rings of alley steels are developed. A profile ring with a round groove located asymmetrically on the outer surface is rolled. The process is simulated by the finite element method. The general-purpose commercial finite element analysis software, MSC.Superform, was used. Experiments are carried in the ring rolling machine and compared with the analysis.