• Proceedings of the Korean Reliability Society Conference
• /
• 2006.05a
• /
• pp.149-157
• /
• 2006

에스컬레이터 스텝 및 수평보행기 팰릿의 가속수명시험 국제 기준인 5백만회 시험조건 및 하중조건의 등가 현장 수명에 대한 근거를 산출하였다. 업체 및 산기원의 시험 데이터로부터 Weibull 모델을 추정하여 분석한 결과 에스컬레이터 스텝 및 수평보행기 팰릿의 형상모수가 각각 2.4$\sim$2.6 및 2.7$\sim$2.8로 산출되었다. 이 형상모수를 이용하여 본 연구에서 대상으로 한 에스컬레이터 스텝 및 수평보행기 팰릿의 B$_{10}$ 수명이 각각의 목표 수명 7년과 6년을 보증할 수 있음을 확인하였다.

• 한국벤처창업학회:학술대회논문집
• /
• 2022.11a
• /
• pp.237-240
• /
• 2022

창업기업은 ICO나 크라우드펀딩 등을 통해 소액주주로부터 자금을 조달하여 캐즘(chasm)을 무사히 통과하게 되면 전문투자기관으로부터 시리즈 투자를 유치하게 된다. 이는 시리즈 단계에서는 창업기업의 불확실성을 줄여주는 전문투자기관이 필요한 반면, 사업의 불확실성이 더 높은 캐즘단계에서는 전문투자기관이 존재하지 않아도 소액투자자들의 모집이 가능하다는 역설이라 할 수 있다. 이러한 역설을 설명하기 위해 본 연구에서는 일반투자자들이 복권형투자(lottery-type investment)에 참여하고 있음을 가정하고, 이에 대한 이론적인 고찰을 시도하였다. 복권형투자는 수익률의 분포가 높은 양의 왜도를 가질 때 이론적으로 가능하다. 사실 경제현상에서 정규분포를 찾아보긴 어렵고 왜도가 높은 파레토분포가 더 일반적이다. 정규분포에 기초한 기존의 가격모델은 오히려 특수해라고 할 수 있다. 기대효용이론에 기초한 복권형투자 모형은 실증분석을 통해 파레토분포의 형상모수(𝛼) 값이 먼저 추정되어야 설계가 가능하다.

• Convergence Security Journal
• /
• v.7 no.1
• /
• pp.45-53
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, Goel-Okumoto and Yamada-Ohba-Osaki model was reviewed, proposes the hyper-exponential distribution reliability model, which maked out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method. For model determination and selection, explored goodness of fit (the error sum of squares). The methodology developed in this paper is exemplified with a software reliability random data set introduced by of Weibull distribution (shape 0.1 & scale 1) of Minitab (version 14) statistical package.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.127-132
• /
• 2006

Pneumatic cylinders that are usually applied in the factory automation line have complicated failure cause because they are composed of various elements. In this study, we performed life test and performance test of double acting pneumatic cylinders according to the international standards and then analyzed the life and the main failure mode of the cylinders in the same load condition. On the basis of these processes, we can estimate shape parameter for the reliability estimation of pneumatic cylinders and their data analysis of life distribution.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.171-177
• /
• 2016

Software reliability in the software development process is an important issue. Software process improvement helps in finishing with reliable software product. Infinite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this study, reliability software cost model considering shape parameter based on life distribution from the process of software product testing was studied. The cost comparison problem of the Lomax distribution reliability growth model that is widely used in the field of reliability presented. The software failure model was used the infinite failure non-homogeneous Poisson process model. The parameters estimation using maximum likelihood estimation was conducted. For analysis of software cost model considering shape parameter. In the process of change and large software fix this situation can scarcely avoid the occurrence of defects is reality. The conditions that meet the reliability requirements and to minimize the total cost of the optimal release time. Studies comparing emissions when analyzing the problem to help kurtosis So why Kappa efficient distribution, exponential distribution, etc. updated in terms of the case is considered as also worthwhile. In this research, software developers to identify software development cost some extent be able to help is considered.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.339-344
• /
• 2015

NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, infinite failures NHPP models that repairing software failure point in time reflects the situation, was presented for comparing property. Commonly used in the field of software reliability based on Weibull extension distribution software reliability of infinite failures was presented for comparison problem. The result is that a relatively large shape parameter was effectively. The parameters estimation using maximum likelihood estimation was conducted and Model selection was performed using the mean square error and the coefficient of determination. In this research, software developers to identify software failure property follows shape parameter, some extent be able to help is considered.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.645-650
• /
• 2018

Software stability is the possibility of operating without any malfunction in the operating environment over time. In a finite failure NHPP for software failure analysis, the failure occurrence rate may be constant, monotonically increasing, or monotonically decreasing. In this study, based on the NHPP model and based on the software failure time data, we compared and analyzed the attributes of the software development cost model using the exponential distribution Rayleigh distribution and inverse exponential distribution considering the shape parameter of the Weibull distribution as the life distribution. The results of this study show that the Rayleigh model is the fastest release time and has the economic cost compared to the inverse-exponential model and the Goel-Okumoto model. Using the results of this study, it can be expected that software developers and operators will be able to predict the optimal release time and economic development cost.

• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.3-10
• /
• 2012

In this paper, make a study decision problem called an optimal release policies after testing a software system in development phase and transfer it to the user. When correcting or modifying the software, finite failure non-homogeneous Poisson process model, considering learning factor, presented and propose release policies of the life distribution, log linear type model which used to an area of reliability because of various shape and scale parameter. In this paper, discuss optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement. In a numerical example, the parameters estimation using maximum likelihood estimation of failure time data, make out estimating software optimal release time.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.79-85
• /
• 2011

LED(Light Emitting Diode) is a powerful device used in applications as diverse as replacements for aviation lighting, automotive lighting as well as in traffic signals. This study is to propose a prediction system based on the degradation model of LED which is determined by combining scale and shape parameter. The degradation model is analysed goodness of fit test using calculated R-square, and is compared with previous models. A LED prediction system using degradation model is developed to automate estimations of degradation parameters and lifetimes.

• Proceedings of the Korean Reliability Society Conference
• /
• 2006.05a
• /
• pp.381-383
• /
• 2006

최근, 선진국에서는 $Rukaflex^{(R)}$라는 새로운 구조의 웨빙을 개발하여, normal usage marks를 감소시키고, 웨빙의 품질을 향상시키려는 경향을 보인다. 기존의 웨빙은 멀티 필라멘트가 경/위사 방향으로 교차되는 구조를 갖는 소폭직물인데, 새로운 구조의 $Rukaflex^{(R)}$는 위사방향에 멀티 필라멘트와 모노 필라멘트를 동시에 사용하여 탄성률(resilience)을 높여서 구조 안정성을 항상시킨 형태의 웨빙이다. 본 연구에서는 $Rukaflex^{(R)}$ 웨빙의 수명을 구조개선 및 마모특성 향상을 통하여 50% 이상 향상시켰는데, 기존 웨빙과 초기 인장강도에서는 차이가 나지 않았으나 활성화 에너지, 형상모수, $B_{10}$ 수명이 증가한 것을 확인할 수 있었다. 이는, 척도모수에서는 기존 웨빙과 근소한 차이를 보이나 구조개선에 의한 마모특성 향상에 의하여, 균일한 마모 및 degradation 특성을 나타내므로, $B_{10}$ 수명이 향상된 것을 확인할 수 있었다.