• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.40-40
• /
• 1996

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2000.11a
• /
• pp.169-169
• /
• 2000

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2000.11a
• /
• pp.170-170
• /
• 2000

• Journal of Biomedical Engineering Research
• /
• v.21 no.2
• /
• pp.119-127
• /
• 2000

금속판/형과스크린 계측기와 CCD 카메라를 이용한 방사선영상장치가 현재 전자포탈영상에 널리 쓰이고 있다. 이 장치의 효율적인 영상획득을 위해 계측효율이 좋고, 공간분해능력이 뛰어난 금속판/ 형과스크린 계측기의 두께를 최적화할 필요가 있었다. 이 논문에서는 금속판과 형광스크린의 두께가 계측효율과 공간분해능에 미치는 영향이 연구되었다. 이 결과는 치료 엑스선 영상장치에 쓰일 수 있는 금속판/형과스크린 계측기의 최적화된 두께를 결정하는데 쓰일 수 있다. 몬테칼로 방법을 이용하여 계산한6 MV 선형가속기에서 발생되는 엑시선의 에너지 스펙트럼을 바탕으로, 여러 가지 두께의 금속판/형광스크린에 대하여 계측효율과 공간분해능을 계산하였고, 이를 실험을 통해 검증하였다. 계측효율은 입사된 엑스선의 에너지가 형광스크린에 흡수된 비율로 계산되며, 공간분해능은 흡수된 에너지의 공간 분포를 통해 계산되었다. 계측효율은 금속판의 두께에 의해, 공간분해능은 형광스크린의 두께에 의해 결정될 수 있음을 본 연구를 통해 확인할 수 있었고, 이로써 특정이용에 관련된 금속판/형광스크린의 두께에 대한 서로 보상 (trade-off) 관계에 있음을 계산과 측정결과를 통해 확인할 수 있었고, 이로써 특정이용에 관련된 금속판/형광스크린 계측기의 최적화된 두께를 산출할 수 있게 되었다. 계산을 바탕으로 CCD를 이용한 전자포탈영상장치의 시작품을 설계 및 제작하였고 팬텀을 이용하여 영상을 얻었다. 단일 프레임 영상은 노이즈가 많으나, 프레임 평균 방법을 이용하여 영상의 질을 향상시킬 수 있었다.

• Journal of the Korean Society of Radiology
• /
• v.6 no.6
• /
• pp.499-505
• /
• 2012

The purpose of this study was to find out the difference of radiation dose value through energy, exposure number, fluoroscopy time, the number of days of exposed scatter X-ray when TLD and OSLD is used in diagnostic radiology. The difference of value were measured by relative ratio and interval. Energy makes high relative ratio of TLD($1.81{\pm}0.41$) than OSLD($1.40{\pm}0.26$), exposure number makes high of OSLD($1.40{\pm}0.26$) than TLD($2.10{\pm}0.10$). There are no significant differences between relative ratio of TLD and OSLD in fluoroscopy time and the number of days of exposed scatter X-ray. But interval of relative ratio in the number of days of exposed scatter X-ray was narrowed in less 0.2. That means, the measurement of scatter X-ray could more confident in TLD and OSLD than the measurement of direct ray. In conclusion, we have to recognize the relative ratio of TLD and OSLD could be vary depending on exposed condition of radiation. And in some cases, double test of TLD and OSLD get more creditable results of dose value.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.195-206
• /
• 2014

In this study, soil contamination maps related to Cu and Pb were created at the Busan abandoned mine in Korea using a handheld X-Ray Fluorescence(XRF) and Geographic Information Systems(GIS). Hydrological analysis was performed using the Digital Elevation Model(DEM) of the study area to identify the flow directions of surface runoff where pollutants can be dispersed from the soil contamination sources. 24 locations for measuring the soil contamination related to Cu and Pb were selected by considering the result of hydrological analysis. The results measured at the 24 locations using the handheld XRF showed that the highest value of Cu contamination is 8,255ppm and that of Pb is 2,146ppm. The field investigation data were entered into ArcGIS software, and then soil contamination maps regarding Cu and Pb with a 5m grid-spacing were created after performing spatial interpolations using the ordinary kriging method. As a result, we could know that high concentrations of Cu and Pb are presented at the waste and tailings dumps around the abandoned mine openings. This study also showed that the handheld XRF and GIS can be utilized to create soil contamination maps related to Cu and Pb in the field.

• Journal of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.229-234
• /
• 1982

Using solution technique, sulfur in the sulfide ore was indirectly determined by X-ray fluorescence spectrometry. The sample was dissolved with the mixed solution of B$r_2$ and HN$O_3$, and Si$O_2$, a major constituent, was repelled from the solution by HF treatment several times, B$a^{2+}$ solution was added to the solution to precipitate the S$O^4_{2-}$ ion as BaS$O_4$. Measuring the fluorescent X-ray intensity of excess Ba2+ ion in the filtrate, the content of sulfur in the original ore was back-calculated. Comparing the results by this method with the gravimetric method, the mean difference was ${\pm}1.7%$ in the range of 20 to 40% of sulfur content and the method was tolerably reproducible.

• Journal of the Korean Chemical Society
• /
• v.36 no.5
• /
• pp.720-726
• /
• 1992

Multivariate analysis such as factor analysis was applied to interpret multivariate data, which were obtained from the overlapped X-ray fluorescence spectra. X-ray fluorescence spectra of 11 reference samples were obtained by the wavelength dispersive spectrometer at a specified range of angle such as $33.50∼34.50^{\circ}$. The data matrix was made from the spectra of 8 samples. The results of abstract factor analysis gave three factors. By the target testing with 8 elements contained in the reference samples, the three factors were found to be Pb, As and Cu. The concentration of these elements in the test samples was determined by target transformation factor analysis regardless overlapping individual peaks.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.403-405
• /
• 2008

Solid state lighting 용 적색 형광체로 적용하기 위하여 $BaTiO_3$:$Pr^{3+}$:$Ga^{3+}$를 다음과 같이 합성하였다. 출발 물질로 $BaCO_3$,$Pr(NO_3)_3$ $6H_2O$, $TiO_2$, $Ga_2O_3$을 사용 하였으며, $BaTiO_3$:$Pr^{3+}\;_x$(x=$0.001{\sim}0.2$):$Ga^{3+}\;_y$(y=0.05, 0.1, 0.5 1, 2, 3)를 각각의 조성대로 혼합한 후 $600^{\circ}C$에서 10시간 전처리 하였다. 전처리한 시료를 시편으로 제조하여 $1200^{\circ}C$ 공기중에 4시간 소성하여 최종물질인 $BaTiO_3$:$Pr^{3+}\;_x$:$Ga^{3+}\;_y$을 얻었다. 이 화합물을 X-선 회절 분석 결과 공간군 P4MM을 갖는 페로브스카이트임을 알 수 있었다. 이 화합물을 적색형광체로 적용하기 위해 PL과 PLE측정을 통하여 형광특성을 알아본 결과 618nm에서 x=0.011, y=1.0 일 때 특성이 가장 우수한 것으로 나타났다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1992.04a
• /
• pp.47-52
• /
• 1992