• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.156-172
• /
• 2014

This research measures and compares on-site net radiation energy, air temperature, wind speed, and surface temperature considering various spatial characteristics with a focus on land use types in urban areas in Changwon, Southern Gyeongsangnam-do, to analyze the accuracy of an ENVI-met model, which is an analysis program of microclimate. The on-site measurement was performed for three days in a mobile measurement: two days during the daytime and one day during the nighttime. The analysis using the ENVI-met model was also performed in the same time zone as the on-site measurement. The results indicated that the ENVI-met model showed higher net radiation than the on-site measurement by approximately $300Wm^{-2}$ during the daytime whereas the latter showed higher net radiation energy by approximately $200Wm^{-2}$ during the nighttime. The temperature was found to be much higher by approximately $2-6^{\circ}C$ in the on-site measurement during both the daytime and nighttime. The on-site measurement also showed higher surface temperature than the ENVI-met by approximately $7-13^{\circ}C$. In terms of the wind speed, there was a significant difference between the results of the ENVI-met model and on-site measurement. As for the correlation between the results of the ENVI-met model and on-site measurement, the temperature showed significantly high correlation whereas the correlations for the net radiation energy, surface temperature, and wind speed were very low. These results appear to be affected by excessive or under estimation of solar and terrestrial radiation and climatic conditions of the surrounding areas and characteristics of land cover. Hence, these factors should be considered when applying these findings in urban and environment planning for improving the microclimate in urban areas.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.400-405
• /
• 1997

산업 현장에서 널리 쓰이는 압축성 유체가 밸브 등을 통하여 원하지 않은 누설이 발생할 경우 그 배관의 외부 온도만을 측정하여 누설량을 개략적으로 구하는 방법을 보였다. 특히 배관라인등 유량 제한 요소가 없는 계통은 Fanno Line 방법을 적용하고 오리피스나 벤추리등 유량 제한 요소가 있을 경우는 노즐 모델링 방법을 적용하면 누설량을 구할수 있고 노즐모델링 방법으로 구한 누설량이 Fanno Line 방법으로 구한 누설량의 약 50%였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1197-1198
• /
• 2011

발전기 여자시스템(Excitation System)은 동기발전기의 계자권선에 직류전류를 공급하고 계자전압을 조정하여 발전기의 전압 및 계통의 무효전력을 제어하는 기능을 수행한다. 본 논문에서는 발전기 여자시스템의 모델링 기법과 현장 운전데이터를 이용한 여자시스템의 모델링 결과들을 기술하였다.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.10a
• /
• pp.31-32
• /
• 2000

어군의 이동경로(Priede ＆ Swift, 1993)를 어류 외적인 주변 환경변수와 어류의 내적인 생리생태 등에 따른 행동요인을 고려하여 보다 합리적이고 논리적인 방법으로 어군탐색을 효율적으로 수행할 필요가 있으며, 따라서 어류이동경로 추적에 대한 모델링과 시뮬레이션(Arnolds ＆ Holford, 1995) 기법의 개발이 필요한 실정이다. 따라서 본 연구는 저서성 어류의 이동 궤적에 관한 현장 계측자료를 해양환경요인과 관련시켜 분석하고, 어류이동에 관한 수치행동의 모델링의 주요한 변수를 파악하였다. (중략)

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.459-462
• /
• 2009

많은 SI프로젝트에서 유스케이스 모델링 기법을 사용하여 요구 분석을 수행하여 왔지만 모델링 기준과 가이드의 상이함으로 인해 프로젝트 현장에서 많은 문제점을 야기하고 있다. 본 논문에서는 애자일 방법론의 장점을 접목하여 애자일한 유스케이스 시나리오 작성법 및 사용자스토리를 개념을 차용한 두 단계 우선순위 부여를 통하여 요구 분석의 효율성과 생산성 제고방안을 제안한다.

• Journal of Korean Institute of Fire Investigation
• /
• v.10 no.1
• /
• pp.77-86
• /
• 2007

컴퓨터 화재 모델링은 1960년대부터 연구 개발되어 왔지만, 화재조사 및 감식 분야에서는 미국의 NIST : National Institute of Standards and TechnologyNIST와 영국의 BRE : Building Research EstablishmentBRE를 중심으로 약 10여년 전부터 적용되기 시작했다. 처음 화재 모델링이 개발되었을 때에는 화재 자체의 물리적인 특성을 설명하는 데에만 사용되어 그 활용분야가 제한적이었으나, 방화공학적인 분석기법과 컴퓨터 기술의 발달로 요즈음에는 화재현장을 재현하고 예측하는데 많이 사용되고 있으며 앞으로 더 많은 활용이 예상된다. 따라서 본 글에서는 화재모델링을 이용한 시뮬레이션이 무엇인지를 배우고, 화재 조사에 적용된 구체적인 사례를 살펴봄으로써 컴퓨터 화재 시뮬레이션을 이용한 화재 조사에 대한 이해를 높이고자 한다.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.119-128
• /
• 2005

This paper presents an intuitive 3D modeling interlace based on a field study and prototype development. The process and tools of modeling were observed in workshops of professional design model making, day modeling, wood caning and glass crafting. The Spray Modeling interlace was developed from the observational analysis of the field study. It is a 3D modeling interface which combines particle spraying and day modeling in Virtual or Augmented Reality space. Virtual volume particles are sprayed on frames in Augmented Reality space as day modeling. It adopts a real air spay gun as a tangible interface device which provides coherent sound and air-force feedback. The prototype development and a user study showed that the interface supports new patterns of form development and expression. Control interfaces and requirements of auxiliary devices were found to be improved. This study examines the potential of the new interlace for designers working in 3D virtual and augmented reality. The new spraying interface is also expected to be used as an alternative interface in 3D computer workspace, games, education software and media art.

• Journal of The Korean Association of Information Education
• /
• v.22 no.5
• /
• pp.557-564
• /
• 2018

As promotion of the 3D printer supply policy, need for 3D printer education is emphasized. But it is few that study of 3D printing educational program teachers can utilize at school. Especially study of CAD SW is very urgent because most of the CAD SW for 3D modeling is difficult and expensive. So in this study, we examine the CAD SW for educational purposes and propose educational programs that can be used at primary school. The instructional model is called "MDIAP" which consists of five stages : Motivation, Demonstration, Imitation, Application, Presentation. Instructional process is consisted of performing tasks and projects. We expect to enhance the function of 3D modeling and creative thinking which is essential to the Fourth Industrial Revolution society.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.143-150
• /
• 2021

There is a need for an artificial intelligent technology that can reduce various types of safety accidents by analyzing the risk factors that cause safety accidents in industrial site. In this paper, user safety profiling methods are proposed that can prevent safety accidents in advance by specifying and modeling user information data related to safety accidents. User information data is classified into normal and abnormal conditions through deep learning based artificial intelligence analysis. As a result of verifying user safety profiling technology using more than 10 types of industrial field data, 93.6% of user safety profiling accuracy was obtained.

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.107-109
• /
• 2002