• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.51-61
• /
• 2016

New building methods are needed to aid increased inner-city redevelopment and industrial construction. A particular area of improvement is the efficient use of cut slopes, with the minimization of associated problems. A retaining wall of precast panels can resist the horizontal earth pressure by increasing the shear strength of the ground and reinforcing it through contact with the panels. Precast panels allow quick construction and avoid the problem of concrete deterioration. Other problems to be solved include the digging of borrow pits, the disposal of material cut from the slope, and degradation of the landscape caused by the exposed concrete retaining wall.This study suggest the methods of improvement of an existing precast panel wall system by changing the appearance of the panels to that of natural rock and improving the process of adhering the panel to a vertical slope. The panels were tested in the laboratory and in the field. The laboratory test verified their specific strength and behavior, and the field test assessed the panels' ground adherence at a vertical cutting. Reinforcement of the cutting slope was also measured and compared with the results of 3D numerical analysis. The results of laboratory test, identified that the shear bar increase the punching resistance of panel. And as a results of test construction, identified the construct ability and field applicability of the panel wall system adhered to in-situ ground. In addition to that, extended measurement and numerical analysis, identified the long-term stability of panel wall system adhered to in-situ ground.

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.63-69
• /
• 2010

This research does focus on supporting all of formal, or informal learning at real time. From industry or education field, learning training is according to worker's current situation or business context. And according to worker's current situation, or business flow, 3D immersion knowledge visualization is effective in the individual ability and the learning progress For this, workers listen to compound knowledge coaching advices at real time. Therefore we developed the realistic 3D based knowledge retrieval method to identify and retrieve multidimensional relation easily.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2017.11a
• /
• pp.1271-1276
• /
• 2017

산업이 고도화되고 기술발전이 가속화되고 있지만, 생산현장에서의 사고와 재해는 아직까지도 지속적으로 발생하고 있다. 이는 시스템의 대규모화, 복잡화, 다양화 등에 따라 나타나는 불안전한 상태(unsafe condition)와 근로자의 안전불감증, 낮은 학습효과, 안전문화 비활성화 등을 포함하는 불안전한 행동(unsafe behavior)에 기인한다. 최근 4차 산업혁명이 대두되면서, 인간과 기계 시스템 사이의 상호작용이 활발해지고, 데이터 가용성과 알고리즘 우수성이 확보되면서, 산업현장에서도 시스템과 공정안전을 위해 최신 기술을 활용하려는 시도가 시작되고 있다. 궁극적으로는, 품질 관리, 고장분석, 작업환경관리, 보건관리 등 생산관리의 다양한 범위에 새로운 산업안전혁신을 가져올 것으로 기대된다. 본 논문에서는 사물인터넷, 드론, 인공지능 등 4차 산업혁명 시대의 하드웨어와 소프트웨어의 결합의 사례를 통해 안전한 생산현장은 물론 신뢰성할 수 있는 공공 및 사회를 위한 지능형 시스템 구축의 필요성을 제시하고자 한다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.65-66
• /
• 2022

산업 재해가 지속적으로 증가하고 있으며, 이에 따라 다양한 ICT 기술을 활용하여 산업현장에서 재해 발생 경감을 위한 노력이 진행되어왔다. 본 연구에서는 작업자 안전을 위한 loT 기반 시스템과 챗봇을 이용한 작업자와 대화형 안전 관리 기술에 대한 연구를 진행하였다. 기존의 챗봇의 활용은 홈페이지에서 단순한 매뉴얼 정보를 대화형으로 제공하는 수준에서 머무르고 있는데 반하여 본 사업에서는 작업자의 헬멧 등 장비에 장착된 인터페이스를 통하여 챗봇을 통한 안전관리를 제공할 수 있는 것이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.11a
• /
• pp.17-20
• /
• 1991

금형의 제작이 쉽고 작은 힘으로 소재 가공을 할 수 있는 공정중의 하나가 원추형금형을 이용한 압출이다. 원추형 금형 압출은 현장에서 많이 사용되고 있으며 이에 대한 해석도 많이 이뤄졌었다. 그러나 정상상태의 해석이 대부분이었고 비정상상태 열간해석은 거의 이뤄지지않았다.(중략)

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1808-1815
• /
• 2016

Stable operation of the dam and the river is directly related to the life and property of citizens, and hydrological observation data reliability is essential to the safety against disaster. Even though real-time data acquisition with high accuracy is needed for scientific and reliable water resources management, currently operating water gauges installed on the upper and down stream of dams or rivers are not easy to be calibrated or corrected on site to ensure higher reliability. K-water Institute has been operating an international accredited calibration laboratory for flows meters, rainfall and water gauges. Rainfall gauges are calibrated in the fixed standard room or on-site. However, due to the absence of on-site calibration procedure and system, on-site calibration for the water gauges are performed by an external agency. Therefore, a development of standard calibration procedure and system for on-site calibration of water gauges is needed to improve the reliability of observed hydrological data.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.37-47
• /
• 2004

In this study the load distribution and settlement of soil nailed-drilled shafts subjected to axial loads were evaluated by a load-transfer approach. Special attention was given to the reinforcing effects of soil nails placed from the shafts to surrounding weathered- and soft-rocks based on an analytical study and a numerical analysis. An analytical method that takes into account the number, the positions on the shaft, the grade, and the inclination angle at which the soil nails are placed was developed using a load transfer curve methods. Through the comparative study, it is found that the prediction by present approach simulates well the general trends observed by the in-situ measurements and numerical results SHAFT 4.0. It is also found that the reinforcing effects of soil nails increases in the order of hard-, soft- and weathered-rock since the ultimate shaft resistance far large bored piles in weathered rocks is fully mobilized after small displacements of the shaft, compared to the soft- and hard-rocks and subsequently the side resistance is transferred down to the soil nails.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.447-456
• /
• 2022

Korea's self-support program has constituted one of the most important workfare policy for the past 25 years. However, many pointed out the lack of field perceptions in the performance indicators of self-support program, such as overemphasis on the economic performance and uniform application regardless of regional types. This research intends to derive policy implications to improve performance indicators of self-support program by analyzing field perceptions, utilizing ISA(Importance-Satisfaction Analysis) method. Analysis on the difference between importance and satisfaction shows that the procedure was perceived more important than the consequences. It also reveals that current indicators were not satisfactory enough to reflect field practices. Finally, ISA matrix classified indicators into keep, improve, policy reconsideration area, and obvious differences were found by regional type. These findings suggest the importance of field-orientation in performance indicators, and by which, can serve as an exploratory study for the improvement of performance indicators.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.137-147
• /
• 2022

Universities should provide experiential learning in subject and non-course subjects so that students can graduate with job competency related to their major and the experiential learning includes capstone design implemented on campus and field training conducted by companies. In particular, the decrease in industry participation in short-term (4 weeks) and mid-term field training (8 weeks) due to the implementation of standard field training introduced from the second half of 2021 is making it more difficult for students to gain practical experience. To solve this problem, in this paper, we propose an industry-participatory capstone design & field practice linkage model that combines capstone design and professional practice to solve the technical difficulties of companies. Participating students find solutions to corporate difficulties in the capstone design process and produce prototypes for solutions during the field practice period, focusing on the case of the department of electronic engineering at Gyeongbuk Y University. We believe that it is one of the good models of industry-university cooperation education in which universities and industries win-win.

• The Safety technology
• /
• no.187
• /
• pp.16-18
• /
• 2013

불과 3년 전까지 조용하고 한적한 농경지였던 고양 원흥지구. 서울 근교에 위치해 바쁜 삶에 지친 도시민들에게 잠시나마 여유로운 풍경을 선사해 주던 이곳이 최근 서민들의 안락한 보금자리로 변화하고 있다. 국내 내로라하는 대형건설사들이 모여 지역 곳곳에서 아파트 단지를 조성하고 있는 것이다. 헌데 그중에서도 우수한 안전관리로 남다른 유명세를 타고 있는 현장이 있다. 그곳은 바로 SK건설이 자연친화형 주거단지를 목표로 건설하고 있는 '고양 원흥 A6BL 아파트 건설공사 3공구 현장'이다. 이곳은 대지면적 7만 $3533m^2$에 지상 1층~10층/22층 규모 아파트 19개동 1,392세대를 조성하는 현장으로, 작업반경이 매우 넓고 하루 출력인원만 600여 명에 달한다. 그런데 이런 거대한 사업규모에도 불구하고 이곳은 지난 2011년 착공 이래 단 한 건의 사고도 없이 무재해 현장을 이어가고 있다. 어떻게 이곳이 우수한 안전현장의 반열에 올라섰는지, 직접 찾아가 그 비법을 살펴봤다.