• Resources Recycling
• /
• v.29 no.1
• /
• pp.43-52
• /
• 2020

The objectives of this study were to identify the optimal mix of foam concrete with the low-strength and high-flow for the repairing ground subsidence situation emergently by utilizing a large amount of industrial by-products and evaluate the possibility by applying it to the site. The factors of the experiment were the mixing ratio of mixing water and a foaming agent and the mixing ratio of foam over paste volume. The optimal mix identified by the experiment was applied to the field and basic properties were evaluated. The results of the experiment showed that the optimal mixing ratio of mixing water and the foaming agent was 10%. Moreover, when the mixing ratio of pre-foam over paste volume was 170%, it satisfied the target. However, to ensure stable quality when applying to the field, the foam mixing ratio was set 140% for the field application. The field application test of foam concrete with the low-strength and high-flow using an eco-friendly binder satisfied all target performances. Therefore, the possibility of using it as a mixture and construction method for a ground repair system is confirmed. However, there was a quality deviation between the upper part and the lower part due to the separation between foam and paste. Consequently, further studies are needed to improve it.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.480-486
• /
• 2006

On account of exchanging main process from chemical precipitation for MLE(Modified Ludzark-Ettinger), an external carbon source was required for supplementation of carbon source shortage that was needed biological denitrification in the S sewage treatment plant(S-STP). In this study, NUR(nitrate uptake rate), OUR(oxygen uptake rate) test and a field application test was conducted for the applicability assessment of Terephtalic acid(TPA) by-product contained about 4.7% acetate as alternative external carbon source. As the results, TPA by-product shows more rapid acclimation than methanol, 8.24 mg ${NO_3}^--N/g$ VSS/hr specific denitrification rate, 3.70 g $COD_{Cr}/g\;NO_3$ C/N ratio and 99.4% readily biodegradable COD contents. In the results of field application, the nutrient removal efficiency was high and effluent T-N concentration is 8.2 mg/L. It is concluded that TPA by-product is the proper alternative external carbon source.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.15-16
• /
• 2010

The field experiments and analyses were performed to apply Post-Tensioned Prestressed Concrete Pavement(PTCP) at the Weigh-in-Motion(WIM) sensor installed sections. The experimental results showed that PTCP could be acceptable for WIM sections because the displacements were negligibly smaller at the cutting location for sensor installation.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.389-395
• /
• 2010

This paper is about the copper slider with high electric conductivity and resistance arc. A new copper slider which has enhanced resistance against frictional wear was developed. By alteration of its material components and manufacturing process, its material property has been enhanced. To verify its enhanced wear-resisting capacity, a laboratory test and a field test were carried out. As the laboratory test, a dynamo test was performed and its test result showed that the developed new copper slider had superior wear-resisting capacity to the currently used copper slider. The new one showed double durability of the current one and normal wearing characteristics. A filed test was performed on the Metro subway lines at service by Seoul Metro. The field test showed similar results to those from the laboratory test, which the d eveloped new copper slider has double superior durability and sound wearing patterns. Authors strongly believe that the replacement of the copper slider currently in use by the developed new one will contribute to the economic and efficient operation of the subway line system

• Magazine of the Korea Concrete Institute
• /
• v.8 no.2
• /
• pp.151-161
• /
• 1996

This paper presents a series of tests to produce the h~gh quality concrete to be filled Inside the steel tube columns. Thls concrete filled steel tube system requires not only the high strength, but a150 the flowable concrete. Laboratory test has been performed to clarlfy the material characteristics and to produce the optlmal mix design proportion. Full scale site mock up test has been then carried out to slnlulate the actual construct~on conditions including the product~on of concrete at the rermcon batch plant, transportation to the construction site, proper workabil~ ty and man power required , 4ddit1onal mock up test has finally been performec to irivesti gate any unfavorable construction s~tuatioils since the actual concrete placement has been sched uled in cold weather period, so that the high quality concrete construction is convinced to be successfully carried out.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.283-286
• /
• 2002

유류로 오염된 부지에 토양세정기법을 적용하기 위한 전 단계로, 실험실 규모의 컬럼실험을 통하여 pilot 규모 현장 적용을 위한 설계인자 및 최적 운전조건을 규명하고자 적정 세척제 종류와 농도, 배합비 및 세정용액 주입유량을 고찰하였다. 회분식실험 결과 POE$_{14}$와 SDS(1:1)를 1%로 적용한 흔합계면활성제의 효율이 가장 우수하였으나, 예비실험 결과 음이온계 계면활성제인 SDS는 미생물에 독성을 끼치는 경향이 있는 것으로 나타나 같은 농도에서 효율이 거의 유사한 POE$_{5}$와 POE$_{14}$ 혼합계면활성제를 이용하여 실험하였다. 선정된 혼합계면활성제를 적용하여 디젤 오염토양 세척능력을 검토한 결과 세척제 농도 1%까지는 효율이 증가하다가 1% 이상의 농도에서는 다시 감소하는 경향을 나타내었으며, 계면활성제 배합비는 1:1로 혼합하였을 경우 세척효율이 가장 우수하였다. 따라서 POE$_{5}$와 POE$_{14}$ (1:1) 1% 혼합계면활성제를 세척제로 선정하였다. 컬럼실험 결과, 주입 flux가 클수록 세정 제거된 총 유류의 양이 증가하였으며, 같은 pore volume의 세정용액 통과 시에는 flux가 작을수록 제거효율이 좋았다.

• Magazine of the Korea Concrete Institute
• /
• v.13 no.4
• /
• pp.46-53
• /
• 2001

노출 콘크리트는 별도의 마감없이 콘크리트 면이 외부에 노출되는 특성상 최적의 품질을 가지는 콘크리트를 제조.시공하여야하는데 이러한 노출 콘크리트는 제조 및 시공 방안이 까다로울 뿐만 아니라 그 내용이 각국 소속 회사의 기술 보유 차원에서 보호되고 있어 기술 도입이 어려운 점 이외에도 시멘트, 골재 등 국산 재료 사용과 시공 방안에 근거한 국내 실정에 적합한 제조 시공 기술과 이를 위한 시방서의 제작이 필요한 시점에 있다. 또한 국내의 경우에도 2002년 월드컵 부산, 광주(<사진 1>), 서귀포 경기장(<사진 2>)등등의 경기장 건설에 노출 콘크리트를 사용하여 콘크리트 마감을 실시하고 있는 등 노출 콘크리트에 대한 요구 및 사용이 증가하고 있는 실정이다. 따라서 본고에서는 경부고속철도 천안역사나 제주월드컵경기장, 그리고 부산 아시안경기 주경기장에 노출 콘크리트를 적용하기 위한 실험 및 현장 적용 사례를 소개한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.17-20
• /
• 2010

기존의 무량판 구조와 동일한 이방향 슬래브구조인 TVS(two-way void slab)공법은 구조적 하중지지 성능이 불필요한 슬래브 단면상의 중앙부 콘크리트를 제거하여 슬래브의 자중을 줄이고 무량판 구조의 단점을 보완하여 장점을 극대화시킨 구조형식이다. 그러나 이러한 장점을 보유한 공법을 현장적용하기 위해서는 내화성능평가를 통해 화재안전성을 확보하여야 하므로, 이에 대한 화재 실증실험을 수행하여 현장적용을 위한 최소 요구내화 시간에 따른 내화성능 확보방안의 도출이 제시되어야 한다. 이에 본 연구에서는 TVS공법의 실제 스팬길이로 슬래브 피복두께에 따른 화재거동 영향성 분석을 위하여 화재실험을 수행하였다. 하중조건은 고정하중과 적재하중을 고려하여 실험체에 등분포 조건으로 사전재하하였으며, 표준화재조건으로 재하가열 실험을 수행하였다. 슬래브의 화재가열 노출면으로부터의 깊이별 온도변화와 처짐변형 특성을 측정하였으며, KS F 2257-1 평가기준에 의거하여 슬래브의 내화성능을 평가하였다. 실험결과 피복두께 50 mm를 확보할 경우, EPS중공체로 제작한 실험체의 경우 약 2시간정도의 내화성능을 확보할 수 있는 것으로 나타났다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.70-76
• /
• 2013

The objective of the paper is to present the results of analytical and experimental studies dealing with dynamic load for continuous steel girder bridges due to normal truck traffic. Various bridge design codes specify dynamic load factor (defined as a fraction of static portion of live load) for short span structures at the level of about 0.3. However, there are not definite values specified for continuous brigdes. Therefore, it is an usual practice to use the code specified dynamic load factors for simple span bridges to continuous bridges without clear background. The field measurement results indicate that the actual dynamic load factors are less than 0.2 for a single truck, and less than 0.05 for two trucks side-by-side, regardless of positive and negative moment region.

• Proceedings of the KSEG Conference
• /
• 2003.04a
• /
• pp.101-106
• /
• 2003