• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.201-206
• /
• 2008

Determining the coefficient of weathering(CW) for stone heritage plays very important role in investigation and conservation plan. In most case, CW is obtained from the empirical relation, which use the difference between sonic velocities of fresh and weathered rocks. In this paper, we measured sonic velocities for the samples from Iksan, Geochang, Wonju, Goesan and Chungju of which our stone heritages are made. We first investigate the uncertainty of velocity by portable measurement by comparing it to lab measurement. There were small difference, but we conclude that the difference is not major. However, the velocity of fresh rock differs significantly among samples: ranging from 3200 to 4400m/s. This cause a lot of error in CW estimation if we use typical fresh rock velocity as of 5000m/s. Thus accurate measurement of the velocity of fresh rock is crucial to CW estimation.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.58-59
• /
• 2000

레이저를 이용한 속도측정은 비접촉식 정밀측정이라는 장점 때문에 산업현장의 생산라인에서 온-라인 계측장비로 이용되고 있다. 특히, 철강업에서는 각종 설비의 제어를 위한 속도측정이나 연신률 측정 및 길이측정에 활용되고 있으며 제지분야나 고무생산 현장에서도 계측장비로 활용성이 점점 높아지고 있다. 본 연구는 레이저를 이용하여 비접촉식 속도계(Laser Doppler Velocimeter; LDV)를 제작하고 특성을 연구하였다. 기본 원리는 두 개의 레이저 빔을 측정대상의 한 지점에 입사시키고 이 지점에서 산란된 빛의 세기를 광검지기로 측정한 후 광검지기 출력의 주파수를 분석하여 측정대상의 속도를 산출하는 방법으로 두 개의 레이저 빔의 주파수가 같은 homodyne type과 주파수가 다른 heterodyne type으로 나누어지고 있다. Heterodyne type의 LDV 시스템은 속도값과 함께 측정대상의 이동방향을 알 수 있고, 측정신호가 고주파 대역에 있으므로 레이저의 불안정성이나 전원잡음 등에 의한 저주파 잡음을 용이하게 제거할 수 있는 장점을 가지고 있다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.45-45
• /
• 2010

반도체 및 디스플레이 산업에 사용되는 진공펌프의 효율이 증대됨에 따른 성능 평가 기술의 향상 과 미세 유량을 조절 및 측정할 수 있는 시스템의 개발이 요구되고 있다. 유량 시스템 중 소닉노즐은 기체 유량 측정 표준기로 사용되고 있다. 또한 유량 측정에 있어서 사용상의 편리성, 이동성, 재현성 등 여러 가지의 장점을 가지고 있어 산업 현장에서 많이 사용되고 있다. 본 연구는 소닉노즐을 넓은 유량 범위에서 사용할 수 있도록 소닉노즐의 유출계수 교정을 목적으로 한다. ISO 9300에서 제시한 사양에 맞추어 목 직경 0.03 mm와 0.2 mm 그리고 1.6 mm의 소닉노즐을 제작하였다. 한국표준과학연구원에서 진공용 유량측정 장치로 개발된 정적형 유량계를 이용하여 제작된 3 종의 소닉노즐 유출계수를 확장불확도 3% 이내로 교정하였다. 교정된 소닉노즐의 유량 측정범위는 약 0.6~90, 000 cc/min 범위를 갖는 것으로 나타났으며, 사용유동 조건에 해당되는 레이놀드 수(Reynolds number) 범위는 26~75, 700 으로 확인되었다. 이러한 결과는 교정된 소닉노즐을 이용하여 진공공정에서 필요한 극 미세 유량의 정밀측정을 가능하게한 새로운 연구결과로 판단된다. 교정된 소닉노즐을 이용하여 진공펌프의 배기속도 측정결과는 기 구축된 정적법을 이용한 배기속도 측정결과와 3% 이내의 오차범위내로 매우 잘 일치함을 보였다. 교정된 소닉노즐은 향후 반도체 및 디스플레이 공정에 사용되는 다양한 진공펌프들의 배기속도를 현장에서 간단하게 평가할 수 있는 '현장 성능평가 장치'에 활용할 예정이며, 현재 공정현장에서 배기속도 측정에 널리 사용 중인 MFC를 대체할 수 있을 것으로 예상된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.722-726
• /
• 2012

각 해역의 부유 플록은 그 해역의 조건에 따라 각기 다르게 형성된 플록이므로, 부유 플록 자체의 특성(결합강도, 밀도 및 크기 등)은 현장특성에 따라 현저하게 다른 "site-specific"한 특성을 가질 뿐만 아니라, 동일 해역이라 하더라도, 조류 등에 의한 유속변화에 따른 흐름전단응력의 증감에 따라 플록의 특성 또한 시간적으로 크게 변화할 수 있다. 이에 현장의 플록 특성이 반영된 부유플록의 침강속도를 산정하기 위해 입도 측정원리중 하나인 BW방법을 응용한 전북대 Owentube를 자체 제작하여 연구가 수행되었으며, 본 연구를 통하여 도출된 현장에서의 점착성 부유 플록의 침강속도 산정 결과는 향후 퇴적물 이송 및 수질 예측을 위한 수치모형 적용시에 필수적으로 요구되는 침강 및 퇴적특성 입력자료로 유용하게 사용될 수 있을 것이다.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.163-174
• /
• 2002

Speeding has been reported as one of the major causes for fatal traffic accidents in Korea. The resolution against this dangerous speeding comes to make the automated speed enforcement system an enforcement tool. The speed detection device, which measures speeds of each incoming vehicles using double loop sensors, requires high accuracy. The object of this study is to develop an accurate speed measurement algorithm using double loop detectors. Some important findings are summarized as follows: 1) It was found that speed measurement errors are caused by scanning rate, distance of two loops, irregular vehicle trajectories, multiple vehicles in detection zone. 2) A proposed algorithm using two signal set proved to reduce variance as well as mean of speed measurement. 3) A proposed filtering algorithm was effective to filter irregular driving vehicles and multiple vehicles in detection zone. A comprehensive field test of developed algorithm resulted in significant improvement of speed measurement accuracy.

• Journal of the Korean earth science society
• /
• v.37 no.7
• /
• pp.408-419
• /
• 2016

To investigate the in-situ sound velocity of sediment in the southwestern part of the East Sea, the laboratory sound velocity was measured using the pulse transmission technique. The sediment sound velocity measured in laboratory was corrected to in-situ sound velocity based on the seafloor temperature, seawater sound velocity, Kim et al. (2004) model, and Hamilton (1980) model. The distribution of the corrected in-situ sound velocity applying Kim et al. (2004) and Hamilton (1980) models reflects the characteristics of sediments of the study area and shows a similar distribution pattern. The correction for in-situ sound velocity was mostly influenced by seafloor temperature. Then, correction of sound velocity using seafloor sediment temperature data should be accomplished for conversion of laboratory data to in-situ sound velocity.

• Explosives and Blasting
• /
• v.29 no.2
• /
• pp.43-50
• /
• 2011

This study measured a vibration level at each distance of construction fields where blasts occur using Lion measuring instrument and used BlastmateIII to measure vibration velocity at the same distance. A total 130 blasts occurred with the weight of a total of 5,180 kg and the number of blast holes per blast was 5, 10 and 20. The weight of 4 kg was used for each hole. Vibrations caused by blast was measured at the distance with the same velocity and level. Measurements were carried 15~102 m away from the blast source. and 273 data on vibration velocity and level were obtained from eight measurements. It analysed data on vibration velocity measured based on existing correlation formulas and compared them to real measurements to analyse interrelationship.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.139-145
• /
• 2011

The practice of asphalt pavement recycling has grown rapidly over the decade, one of which is the cold in-place recycling with the foamed asphalt (CIR-foam) or the emulsified asphalt (CIR-emulsion). Particularly, in Iowa, the CIR has been widely used in rehabilitating the rural highways because it significantly increases the service life of the existing pavement. The CIR layer is typically overlaid by the hot mix asphalt (HMA) to protect it from water ingress and traffic load and obtain the required pavement structure and texture. Most public agencies have different curing requirements based on the number of curing days or the maximum moisture contents for the CIR before placing the overlay. The main objective of this study is to develop a moisture loss index that the public agency can use to monitor the moisture content of CIR layers in preparation for a timely placement of the wearing surface. First, the moisture contents were measured in the field using a portable time domain reflectometry (TDR) device. Second, the weather information in terms of rain fall, air temperature, humidity and wind speed was collected from the same location. Finally, a moisture loss index was developed as a function of initial moisture content, air temperature, humidity and wind speed. The developed moisture loss index based on the field measurements would help the public agency to determine an optimum timing of an overlay placement without continually measuring moisture conditions in the field.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.1
• /
• pp.55-66
• /
• 2006

Laboratory tests have revealed that the liquefaction resistance of sands depends strongly upon the degree of saturation, which is expressed in terms of the pore pressure coefficient, B. The velocity of compression waves(i.e. P-waves), which have been known to be influenced largely by the degree of saturation and can be measured conveniently in the field, appears as an indicator of saturation. In this paper, the Stokoe type torsional shear(TS) testing equipment is modified to saturate the specimen and measure the velocities of P-wave and S-wave and pore pressure buildup. The velocities of P-wave and S-wave for Toyoura sand from Japan is measured and compared at the various B-value (degree of saturation) which are partially saturated to fully saturated conditions. Additionally, the variation of the pore water pressure induced during undrained TS tests at the various B-value is measured and analyzed.

• The Journal of Engineering Geology
• /
• v.16 no.1 s.47
• /
• pp.1-14
• /
• 2006

Various measurements were carried out to estimate the modulus of deformation in two dominant rock types in Korea: granite and gneiss. Four most commonly used methods were utilized: Goodman jack tests, PS well logging, laboratory ultrasonic tests and laboratory uniaxial loading tests. Laboratory static and dynamic Young's moduli depend on the magnitude of the applied axial stress, range of Sequency used for measurement and the loading/unloading condition. As the laboratory measurement condition approaches to that in situ, the resultant moduli also appear to be comparable to that in situ. This suggests that the simulation of in situ stress condition is important when the modulus of rock is determined in the laboratory Dynamic Young's modulus is generally higher than static Young's modulus because of (micro)crack behavior in response to the stress, different range of frequency used for measurements, and the effect of the amplitude of deformation. Understanding of the relations in moduli from different measurement methods will help estimate appropriate in situ values.