• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.137-144
• /
• 2009

This paper was studied on the problem of field inspection tester of the photoelectric type smoke detector. The experiment objects were chosen 3 type's testers such as A type (incense), B type (dimethylpolysiloxane), C type (mixtures of hydrocarbon) which were used for performance checking of the photoelectric type smoke detector for the fire protection. The experimental methods were used reliability verification experiment, performance verification experiment and performance change of fire detector by smoke component. It was confirmed through the experiment that the testers had problems of smoke concentration condition and wind velocity condition and smoke component. Consequently, this paper verified that the field inspection testers of the photoelectric type smoke detector had problems in the inspection of fire protection.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.391-399
• /
• 2018

In this paper, experimental study performed on steel-pipe connections for structural members of a greenhouse is presented. By those experiments performed, bending moment, deformation and stress distribution of specimens were investigated under four point bending test. The bending performance according to connection method using pin and the stretching is also investigated. The results of bending performance of the no connection specimen were compared to those of other connection specimens. The pin and stretching connection specimens showed lower banding performance than the no connection specimen. The stretching connection method was relatively higher bending performance than the pin connection specimens. According to the results, we proposed the connection method with good bending performance that can be applied to steel-pipe connection in greenhouse.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1753-1755
• /
• 2001

최근 전력설비의 절연을 위해 고분자 재질의 절연물이 광범위하게 사용되고 있다. 이러한 고분자 재료는 현재까지 주로 사용되어 온 세라믹 재질과는 달리 환경에 의한 열화를 동반하게 된다. 최근에 현장에 적용되기 시작한 고분자 재질의 절연물에 대한 장기 열화특성을 평가하기 위한 연구들이 다수 진행되고 있는 것도 이러한 이유 때문이다. 피뢰기의 경우에도 기존의 세라믹 애관을 고분자 재질의 애관으로 대체하기 시작하여 일부 제품들이 현장에서 우수한 특성을 보이는 것으로 보고되고 있으나 장기신뢰성에 대해서는 명확하지 않은 상태이다. 본 논문에서는 국내에서 제작되어 현장사용중인 폴리머 피뢰기를 발취하여 사용기간중 성능상의 변화를 분석하고 가속열화시험을 통해 성능의 변화를 관찰하고자 하였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2009.04a
• /
• pp.200-209
• /
• 2009

본 논문은 차동식스포트형열감지기 현장점검용기기 개발에 관한 연구이다. 현재 소방점검 시 차동식스포트형열감지기의 성능확인을 위해 사용되는 점검기기(4 Type)들을 실험대상으로 선정하여 문제점을 찾고, 도출된 문제점을 바탕으로 감지기 형식승인 시 감도시험기준 조건과 동일한 온도조건인 주위온도 대비 30$^{\circ}C$ 높은 온도로 자동설정 할 수 있는 기능과 그 온도를 계속 유지할 수 있는 기능을 갖춘 새로운 차동식스포트형열감지기 현장점검용 기기의 시제품을 제작하고 그 성능을 확인하였다.

• Land and Housing Review
• /
• v.14 no.1
• /
• pp.115-122
• /
• 2023

Modular construction is popular as a smart building system because it can shorten the construction period. This study proposed a precast concrete (PC) core system that can further shorten modular construction time. The system was developed and its structural performance was verified through computational analysis. The proposed PC core system is a complete PC construction method using dry bonding. The results of the study indicated that the proposed PC core system has structural stability and performance suitable for modular housing.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.255-266
• /
• 2014

This paper investigates the seismic performance of T-shaped PC walls with a new vertical connections and wet cast joint. The load-displacement relationship, strength, ductility, failure mechanism, and deformation capacity of the T-shaped PC walls subjected to cyclic loading are verified. Test parameter is diagonal reinforcement of both flange and web wall panels to transfer shear strength. The longitudinal reinforcing steel bars placed edges of walls yield first and the ultimate deformation is terminated due to premature failure of connections. And diagonal reinforcements for shear transfer in walls are effective to restrain the wall crack. The strength and displacement obtained by the cross section analysis were very similar to the experimental data.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1730-1738
• /
• 2001

This paper presents an overview of testing and analyzing field performance of a centrifugal chiller which has a rated capacity of 200 RT(703 kW). Field data of a chiller installed in the cleanroom research building of KIST has been collected far performance analysis. The operating data included start-up, shut-down, and quasi-static state where cooling capacity and compressor power consumption varied cyclically. It was found that the steady-state thermodynamic model could be applied to relate the cooling capacity and COP under quasi-static conditions. The results led to finding the required cooling load pattern and a possible energy saving method. This study provides a method of evaluating performance of a large capacity centrifugal chiller in which field test is necessary.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.430-433
• /
• 2011

산불 진화에 사용되는 지상 주력 장비를 대상으로 수원으로부터 호스 거리 및 고도에 따른 성능을 정량화하기 위한 현장 적용 실험을 실시하였다. 대조군으로는 담수지 형태의 수원을 사용하고 수원으로부터 고도차가 40m 수준인 예비실험을 대상으로 성능값을 비교하였다. 본 현장 적용 실험에서는 산림 내 계곡지를 수원으로 하였으며, 고도차가 150m 로 예비실험의 3.75배인 지형을 선택하였다. 고도에 따른 영향이 크지 않은 예비 실험과 비교하였을 때 고도가 높아질수록 동일 거리에서 측정한 성능값은 평균 50% 이상의 감소를 나타내었다. 그러나 수평 및 수직 거리는 20% 이내 수준의 감소를 나타내어 진화에 큰 장애 요소로는 작용하지 않았으며, 펌프압력은 소형펌프의 압력 상승이 가장 큰 상승률을 나타내었다. 이와 같은 결과는 수원의 형태에 따라 용수 공급차에 기인한 것으로 안정적 용수공급 저하, 펌핑압 부하 증가, 이물질 삽입 등이 원인인 것으로 사료되며, 고도에 따른 영향 인자도 반영된 것으로 해석된다. 또한 실험을 통해 진화장비별 실제 진화대원의 적정 사용거리와 거리별 적정 소요인원을 산출할 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.314-317
• /
• 2002

This paper present a methods for performance evaluation of digital governor and we treat the way to reduce the trial and error when the developed digital governing system is applied to station. The parameters of the model are estimated using input-output data, the model adjustment technique and a genetic algorithm(GA). To verify validity of the completed model, the comparision model and real output signals have been carried out. The developed digital governing system is applied to Sumjingang hydro-power plant, Korea Hydro Nuclear Power Corporation, it has replaced mechanical governing system. Test was performed in order to demonstrate the performance evaluation of the digital governor parameters.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.2 s.10
• /
• pp.87-98
• /
• 2002

Korea government is making an effort to improve the efficiency in construction industry by introducing CITIS (Contractor integrated Technical Information Service). In order to provide a base for the application of CITIS into the construction industry, this research provides a concept of virtual factory which should be incorporated into CITIS system for the successful collaborative work in the virtual space. It then implements a prototype system through process and data modeling to apply into the road construction projects. The prototype system is tested to verify its efficiency. Finally, lesson learned from these works is provided to advance the current CITIS toward a collaborative virtual factory.