• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.5
• /
• pp.57-63
• /
• 2009

Interface friction in blanking dies, cold forging and extrusion of aluminum alloys is a major cause of inefficient process. This paper describes an investigation of femtosecond laser texturing for reduction of interface friction on sliding surfaces in forming process. Femtosecond direct writing technology was used to fabricate a laser micro-machined die and to create microgroove patterns with varying size and density on metal forming dies. A systematic approach to find the optimum parameters and computer simulation comparison of friction coefficients are provided to study the relation of friction coefficients and die profiles. In metal forming tests, the effectiveness of various laser-machined patterns for enhancing interface lubrication is determined.

• Journal of Power System Engineering
• /
• v.17 no.6
• /
• pp.136-141
• /
• 2013

This study introduces and analyzes the energy for heating and cooling system in region with volcano-stratigraphic. The thermodynamic properties of air through the air blower installed at the entrance of borehole are measured. It estimates the availability of underground air for heating and cooling system through experimental data and theoretical analysis. Based on our conclusion from these calculations we predict possibility of over 40kW steady and stable energy source from underground. Therefore this underground air can be utilized in region with volcano-stratigraphic.

• 한국생활과학회:학술대회논문집
• /
• 2008.05a
• /
• pp.149-150
• /
• 2008

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.382-386
• /
• 2012

A femtosecond laser with 775nm central wavelength and 150 fs of temporal pulse width was used for multi layered glass cutting applications. Ultrashort pulse was effectively used for clean glass cutting with $50{\mu}m$ depth and minimum cutting width. Laser beam was split to two stages and focused on the top surfaces of each layer. Ablation threshold of used glass was measured to be $2.59J/cm^2$. In experiments, 200mW laser power and 1mm/s scanning speed was used for preliminary experiment. Air gap was the major defect occurring parameter and laser power was less sensitive to glass cutting in the experiment. The maximum cutting speed was measured to be 60mm/min with 2kHz, however, Maximum 3m/min cutting speed can be achievable with a commercially available laser with 100kHz.

• Laser Solutions
• /
• v.11 no.4
• /
• pp.1-6
• /
• 2008

This paper describes microscale laser structuring of electrospun(ES) PCL and PET nanofiber meshes. Electrospinning produces non-woven meshes of synthetic or natural materials fibers with diameters ranging from micron down to the nanometer scales that are advantageous for the supporting the growth of the small scale structures. Ultrashort laser found to be effective on the fabrication of engineeredtissue scaffold with minimum heat affect and ultra precision ablation patterns. The affect of energy range for ablation quality was analyzed and ablation characteristics of PCL and PET were compared.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.3
• /
• pp.204-213
• /
• 2002

In this work, hydrogen production by a 2-step water-spritting thermochemical cycle based on metal oxides redox pairs was investigated on the bases of the thermodynamics and technical feasibility. Also, a 2nd-law analysis performed on the closed cyclic process indicates a maximum exergy conversion efficiency of 7.1% when using a solar cavity-receiver operated at 2300K and air/Fe3O4 molar ratio = 10.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.517-517
• /
• 2015

레이더에 수신된 신호는 신호처리기를 통해 자료의 해석시 불필요한 지형에코를 제거하는 과정을 거친다. 신호처리기의 필터는 레이더의 기종에 따라 다르나, 일반적으로 도플러 속도나 스펙트럼 폭의 값에 따라 지형에코를 제거하며, 이 값들에 따라 번호를 부여하여 필터를 선택적으로 이용할 수 있도록 되어 있다. 본 연구에서는 국토교통부에서 운영하고 있는 비슬산 강우레이더와 소백산 강우레이더의 필터번호에 따른 반사도의 빈도 영역 그래프, 반사도-차등반사도의 빈도 산포도, 반사도와 차등반사도의 평균 및 표준편차를 통해 적정 필터를 선정하고자 하였다. 이 때, 지형에코와 기상에코의 제거 정도 확인을 위해 레이더 관측반경 50 km를 기준으로 비교를 수행하였다. 그 결과, 1번 필터 이후에는 필터에 따른 큰 변화가 없어 1번 필터를 사용하는 것이 기상에코를 보존하면서 지형에코를 제거하는 효과가 가장 좋은 것으로 판단되었다.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.163-178
• /
• 1999

Conventional shortest path searching a1gorithms are based on the partial searching method such as Dijsktra, Moore etc. The a1gorithms are effective to find a shortest path in mini-modal condition of a network. On the other hand, in multi-modal case they do not find a shortest path or calculate a shortest cost without network expansion. To copy with the problem, called Searching Area Problem (SAP), a global searching method is developed in this paper with Genetic Algorithm. From the results of two examples, we found that the a1gorithm is useful to solving SAP without network expansion.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.87-98
• /
• 1999

전통적인 교통계획 과정에서 이용되어 온 수요모형들은 대부분 수단선택과 통행배정을 나누어 실시하는 모형이 주를 이루어 왔다. 그러나 교통수단이 다양해짐에 따라 실제 통행자들은 통행 도중 환승을 통해 수단을 전환하는 경우가 발생하게 되며 이 경우 수단선택 과정과 통행배정 과정을 하나로 통합하여 분석할 필요가 있다. 따라서 기종점간 수단 분담율은 기점과 종점에서의 그 값이 다르지만 수단선택과 통행배정이 분리되어 있는 기존 모형을 적용할 경우, 출발과 도착시의 수단 분담율이 동일하게 나타나는 비현실적인 결과를 도출하게 된다. 이러한 문제는 통행수단을 통행의 기본단위로 보고, 수단통행량을 추정하기 때문에 그 수단을 이용하는 통행자들의 행태 대신 수단의 특성만이 모형화되기 때문이다. 따라서 기존의 교통계획 과정에서는 수단분담 과정과 통행배정과정이 분리됨에 따라 수단간 환승이 고려되지 않아 통행자들의 경로 구성과정을 정확히 표현하는데 어려움이 있었다. 또, 수단분담 모형으로 가장 많이 이용되는 로짓 모형의 경우 환승을 고려하면 비관련 대안간 독립성문제(CIA)가 발생하고, 환승경로 수요추정이 불가능해 사실상 통합 교통망과 같이 복수 수단이 운행하는 교통망은 분석하기 어렵게 된다. 본 연구에서는 이를 해결하기 위하여 사람통행(Person Trip)을 기반으로 하는 수단분담-통행배정 통합모형을 개발하고 기존의 결합모형과 그 결과를 비교하였다.

• Journal of Wetlands Research
• /
• v.17 no.3
• /
• pp.245-250
• /
• 2015

We systematically analyzed the Wetland Conservation Action Plan of Gyeongsangnam Province to evaluate conservation status in local government level. Project topics were categorized into 1) wetland infrastructure, 2) wetland conservation and wise use, 3) education and awareness, and 4) conservation framework. From 2010 to 2013, 42 projects (145 cases, 88,899 million won) were implemented by 14 affiliated organizations under Gyeongsangnam Provincial Government. The number of projects and budget size has been decreased over 4 years, besides most of main projects were continued. The budgets were largely used for wetland project of cities and counties. Development and implementation of various conservation projects may have considerable potential values in wetland conservation, while it is still difficult to assess their overall effectiveness in the society. Diverse wetland management practices in Gyeongsangnam Provincial Government have accumulated fundamental practices and knowledge for an effective local conservation. These administrative experiences will further benefit other local government to establish wetland management framework. To accelerate policy diffusion to other local governments, Gyeongsangnam Province needs to promote and share leading experiences and information of wetland conservation. Enhanced local government framework by the legislation at central government will further support country-level management plans and practices.