• 제목/요약/키워드: 헤밍금형

검색결과 6건 처리시간 0.017초

헤밍금형설계의 자동화를 위한 타이밍선도 자동설계시스템개발 (Timing Chart Auto-Design system development for an Automated hemming die design)

  • 정효상;조윤행
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.973-976
    • /
    • 2004
  • So far, this report is written by knowledge and standard through several reference drawing and experienced contents with drawing hemming die. The contents about actual design is so huge that I will write about it next time. Timing chart is important to hemming die because of link position and numbers. Timing chart need a very much design time because link number and position have to applied for each case. In this paper developed an automatic timing chart and link position by relation and Pro/Program of Pro/Engineer. The method used relation rule of design parameter for timing chart. In the future, I believe that simple easy to correct and reasonable price hemming die will be producted.

  • PDF

헤밍 공정의 횟수가 헤밍 품질에 미치는 영향에 관한 연구 (A Study on the impact on the quality of hemming the number of hemming process)

  • 신나은;최문호;최영덕;최해운;장래성;최계광;김세환;윤재웅;이춘규
    • Design & Manufacturing
    • /
    • 제10권1호
    • /
    • pp.26-30
    • /
    • 2016
  • In this study, it was investigated by comparing the experimental hemming by the 3 steps and 2 steps in order to stabilize the quality of the hemming process. In the experimental results, the three-step hemming superior to the two-step one and the dimensional stability of part that was made by the three-step on was high. When the second stage Hemming has been found that the deflection caused by the force to the wear of the punch becomes larger plane can be folded by the hemming crimping and crimp uncertain.

자동차 패널용 헤밍 금형설계를 위한 타이밍차트 자동생성 (Automatic Generation of Timing Chart for Car Panel Hemming Die Design)

  • 김동직;송윤준;정훈;한영호
    • 소성∙가공
    • /
    • 제15권7호
    • /
    • pp.496-503
    • /
    • 2006
  • The inner and outer car panels for bonnet, door, and trunk lid are assembled by hemming rather than welding. To achieve successful fabrication of these panels, the complicated timing chart of hemming units for pre-and main hemming stages should be made to optimal one. In this study, a design system for automatic timing chart generation is developed. Using AutoCAD VBA and EXCEL data chart, hemming die design parameters and guidelines were put into the program to give hemming unit drawings and consequent timing charts. Then the prepared timing charts were checked and modified. The effectiveness of the system is verified by applying it successfully to hemming unit design for bonnet panel joining.

강도보강용 STS304 베젤 프레임 헤밍 공정의 금형 설계 (The Die Design of STS304 Bezel Frame for The Strength Reinforcement in Hemming Process)

  • 김강현;이상호;김병민
    • 소성∙가공
    • /
    • 제17권6호
    • /
    • pp.436-442
    • /
    • 2008
  • As the structure of a mobile phone becomes thin to catch up with a slim product trend, the structural strength and resistance to shock of TFT-LCD module are getting to be reduced. Hence, TFT-LCD module is the strength reinforced by bezel frame. The bezel frame was produced by the multi hemming processes with several folding parts. The determination of the optimal number of hemming part and structure of bezel frame are very important process parameter to obtain the strength of that. The effect of process parameters on strength of bezel frame was investigated by FEA. Based on the result of FEA, the experiment was performed using manufactured hemming die, the result of the experiment was compared with FEA and verified. Also, three point bending tests were performed to check the strength of bezel frame.