• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.824-829
• /
• 1998

미국의 개량형 원자력 발전소 개념설계단계에서 중대사고시 사고완화를 위한 전략으로 원자로 압력용기 외부냉각 개념이 제안되었다. 중대사고 진행과정에서 노심용융물이 원자로 압력용기 하부헤드로 재배치 되었을 때 압력용기 외벽을 냉각함으로서 노심용융물을 압력용기 내부에 가두어 두어 격납건물 내로의 유출을 방지하는 방식이다. 이 연구에서는 원자로 압력용기 하부헤드 내의 노심용융물 거동중 자연 순환에 의한 거동을 수치적으로 모의하여 보았다. 연구결과, 정상상태의 온도 및 속도분포는 현상학적으로 적절하게 모의되나 고화와 액화의 경우에는 고유모델의 필요성이 요구되었다.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.25-31
• /
• 2014

In this paper, we propose a new scheme for enhancing the computational SLAM overhead of intelligent robots. The idea is to use the idle resource of Smart Phone as a SLAM processor. We designed a new model for incorporating the smart phone with robot. According to the experimental results, we found that the smart phone was very helpful for improving the SLAM performance and the gain from the smart phone was increased as robot moves faster.

• Journal of the KSME
• /
• v.43 no.1
• /
• pp.66-77
• /
• 2003

• Composites Research
• /
• v.24 no.5
• /
• pp.29-33
• /
• 2011

The application of high performance materials for the deck can represent a fair alternative to reduce the weight of the deck and improve the econimic efficiency of the bridge even if high performance materials are costly. In UHPC(Ultra High Performance Concrete) bridges, it is necessary to verify that exiting headed stud can be used to transfer longitudinal shear forces across the steel-concrete interface. In this paper, the push-out tests are performed to analisys the composite behavior between UHPC bridge deck and steel girder. The ultimate strength of test specimens is proportional to the diameter of headed studs in push-out test for static loading. Test results show that the shear strength of headed stud is improved for the case of normal concrete bridge decks.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.370-371
• /
• 2019

태양 에너지 수집형 무선 센서 네트워크는 지속해서 에너지를 수집할 수 있어 배터리 기반 센서 네트워크의 에너지 제약 문제를 완화할 수 있지만, 고정된 싱크의 사용으로 싱크 주변에 존재하는 노드들이 상대적으로 에너지 소비가 증가하는 문제, 즉 에너지 사용 불균형 문제는 해결하지 못한다. 최근의 연구에서는 클러스터링을 기반으로 한 모바일 싱크를 도입하여 이를 해결하고자 했지만, 클러스터 헤드 및 그 주변 노드들의 에너지 부담은 여전히 존재한다. 한편, 무선 전력 전송 기술 발전에 따라 무선 센서 네트워크에서 모바일 싱크를 이용한 무선 전력 전송의 연구가 활발히 이루어지고 있다. 따라서 본 논문에서는 무선 전력 전송이 가능한 모바일 싱크와 효율적인 클러스터링 기법(클러스터 헤드 선출 포함)을 이용하여 에너지 불균형 문제를 최소화하는 기법을 제안한다. 제안 기법은 클러스터 헤드 및 헤드 주변 노드의 에너지 핫 스팟이 완화됨으로, 전체 네트워크의 정전 노드들이 감소하고 수집된 데이터양이 증가한 것을 성능평가를 통해 확인할 수 있다.

• Fire Science and Engineering
• /
• v.34 no.4
• /
• pp.45-51
• /
• 2020

The aim of this study is to investigate the gas temperature and velocity during sprinkler activation considering the fire growth scenario based on the thermal response model of the sprinkler. The fire source is assumed to have time square fire growth scenarios with a maximum heat release rate of 3 MW. Eight types of standard and fast-response sprinkler heads with an operating temperature range of 65-105 ℃ and a response time index range of 25-171 m^1/2s^1/2 were adopted. The temperature difference between the gas stream and the sensing element of the sprinkler head decreased as the fire growth slowed down, and the RTI value decreased. The overall gas temperature and velocity conditions predicted using the FDS model at sprinkler activation were in reasonable agreement with those of standard test conditions of the sprinkler head response. However, the sprinkler head could be activated at lower limits of gas temperature and velocity under the current test conditions for a slowly growing fire scenario.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.198-204
• /
• 2012

Generally, the clustering of sensor nodes in WSN is a useful mechanism that helps to cope with scalability problem and, if combined with network data aggregation, may increase the energy efficiency of the network. The Hierarchical clustering routing algorithm is a typical algorithm for enhancing overall energy efficiency of network, which selects cluster-head in order to send the aggregated data arriving from the node in cluster to a base station. In this paper, we propose the improved-LEACH that uses comparably simple and light-weighted policy to select cluster-head nodes, which results in reduction of the clustering overhead and overall power consumption of network. By using fine-grained power model, the simulation results show that i-LEACH can reduce clustering overhead compared with the well-known previous works such as LEACH. As result, i-LEACH algorithm and LEACH algorithm was compared, network power-consumption of i-LEACH algorithm was improved than LEACH algorithm with 25%, and network-traffic was improved 16%.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.399-405
• /
• 2003

We manufactured a clamp-type optical current transformer (COCT) head using FD10 glass. It was manufactured of two parts of FD10 glass with symmetrical structure and was designed so that light propagates along the critical angle in order to avoid a phase difference with the light within the sensor head at reflection. Also, we measured and analyzed the current of conductor from 0 to 1,000 AT, change of optical power with incidence angle of light, temperature and polarization of light, long-term current measurement using COCT head, and demonstrated the feasibility of manufactured COCT through those experiments.

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.163-167
• /
• 2020

In this study, thermal stress analysis by shape of piston head was conducted to investigate the shape of a durable piston. As the result, the farther the temperature is from the part where the temperature is applied, the lower the temperature can be seen. Depending on the shape of the piston head, the heated area became different. So, it could be seen that it affected the piston column part and the skirt part. This study showed that three models produced the least stress from the center of the piston head in the same way. Model A showed the smallest stress resulting in the yield compared to the other two models. Model B is a plate type piston head with a concave shape of the piston head, indicating that it is the model that has the least effect on the surrounding area at the center of the piston head. Model C showed the greatest stress resulting from the yield. The results of this study are also thought to be useful for designing the shape of durable pistons. By utilizing the thermal stress analysis due to piston head shape, this study is thought to conform with the aesthetic design.

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.249-252
• /
• 2002