• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.298-305
• /
• 2017

Benzovindiflupyr is a new pyrazole carboxamide fungicide that inhibits succinate dehydrogenase of mitochondrial respiratory chain. This study was carried out to develop an analytical method for the determination of benzovindiflupyr residues in agricultural commodities using LC-MS/MS. The benzovindiflupyr residues in samples were extracted by using acetonitrile, partitioned with dichloromethane, and then purified with silica solid phase extraction (SPE) cartridge. Correlation coefficient ($r^2$) of benzovindiflupyr standard solution was 0.99 over the calibration ranges ($0.001{\sim}0.5{\mu}g/mL$). Recovery tests were conducted on 5 representative agricultural commodities (mandarin, green pepper, potato, soybean, and hulled rice) to validate the analytical method. The recoveries ranged from 79.3% to 110.0% and then relative standard deviation (RSD) was less than 9.1%. Also the limit of detection (LOD) and limit of quantification (LOQ) were 0.0005 and 0.005 mg/kg, respectively. The recoveries of interlaboratory validation ranged from 83.4% to 117.3% and the coefficient of variation (CV) was 9.0%. All results were followed with Codex guideline (CAC/GL 40) and Ministry of Food and Safety guideline (MFDS, 2016). The proposed new analytical method proved to be accurate, effective, and sensitive for benzovindiflupyr determination and would be used as an official analytical method.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.131-138
• /
• 2009

Heavy metal residues in soil, rice straw, unhulled rice, rice hull, polished rice, and rice barn on the rice paddy in the "Top rice production complex which is non-contaminated area were evaluated. It was observed that the average concentrations of As, Cd, Cu, Pb, and Hg in the paddy soils were 1.235, 0.094, 4.412, 4.728 and 0.0279 mg/kg, respectively. There were no cultivation areas exceeded of the threshold for soil contamination designated by "The Soil Environment Conservation Law" in Korea. For the polished rice, there were no samples exceeded of a permissible level of heavy metal residues such as 0.051 mg/kg of As, 0.040 mg/kg of Cd, 0.345 mg/kg of Cu, 0.065 mg/kg of Pb and 0.0015 mg/kg of Hg. For the uptake and translocation of heavy metals to rice plant, a main part of heavy metal accumulation was rice straw, and then rice bran. Furthermore, it shown that accumulation of heavy metals in unhulled rice, rice hulls, brown rice, and polished rice was approximately similar as low. The slopes of translocation of heavy metals from soil to polished rice were following order as Cd, 0.4321 > Cu, 0.054 ${\fallingdotseq}$ Hg, 0.052 > As, 0.021 > Pb, 0.008. It was observed that potential ability of Cd uptake in rice plant and then its translocation into polished rice was very high. Concentrations of copper and mercury absorbed in the rice plant were moderate for translocating into the polished rice, while the arsenic and lead in the plant were scarcely translocated into the polished rice. The distribution of heavy metals absorbed and translocated into aboveground parts of rice plant was appeared that there were remained at 63.3-93.4% in rice straw, 6.6-36.9% in unhulled rice, 0.6-5.7% in rice hulls, 3.2-31.3% in brown rice, 0.8-4.6% in rice bran and 1.1-26.7% in polished rice. The accumulation ratio of Cd in the aboveground parts of rice plant was remained at 26.7-31.3% in brown and polished rice.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.743-749
• /
• 2010

Objective of this research was to investigate the effect of various potassium concentrations in fertilizer solution on growth of and nutrient uptake by 'Chugyang' eggplant ($Solanum$ $melongena$ L.). Tissue analyses were conducted to determine the threshold levels of potassium in plants when disorders develop for potassium. The lower leaves of K deficient plants became spotted, yellowing in color, and finally necrosis occurred. The necrosis spread inward and upward. K toxic plants developed necrotic spot at the margin of old leaves and the surface of old leaves were twisted. The tissue K contents in the most recently fully expanded leaves and dry weight of full above ground plant tissue at 35 days after transplanting showed linear and quadratic response to elevated K concentrations with the equation of y=1.127+0.3147x ($R^2$=0.8916) and y=14.92+2.2743x-$0.1402x_2$ ($R^2$=0.8659). When 10% reduction in dry weight set to threshold levels, optimum tissue K contents are in the range from 2.1 to 5.1%. The yield through 150 days after transplanting and tissue K contents at 150 days after transplanting also showed quadratic and linear responses to elevated potassium concentrations in fertigation solution with the equation of y=153.24+345.5x-$18.46x^2$ ($R^2$=0.8620) and y=0.9921+0.3860x ($R^2$=0.9611), respectively. When the 10% reduction in yield is set to threshold levels, the tissue K contents for maximum yield should be around 3.4% to 5.9% in most recently fully expanded leaves.

• Korean Journal of Ecology and Environment
• /
• v.37 no.2 s.107
• /
• pp.248-254
• /
• 2004

This study was conducted to investigate the effects of salinity in irrigation water on the growth, yield components, yield and grain quality of rice plant by the pot experiments. Irrigation waters were supplied with control and amended with NaCl at 1,000, 2,000, 3,000, 5,000, and 7,000 ${\mu}s\;cm^{-1}$ electrical conductivity. A randomized block design was used with four replicates for each treatment and control. As increasing salt concentration, plant height, tiller number, SPAD value, dry weight, content of N, P, and K, ripened grain ratio (%), 1,000 grain weight, and protein content (%) tended to decrease, especially, significant at 3,000 ${\mu}s\;cm^{-1}$ of salt level. Grain yield decreased significantly at all treatments. The percentage of head rice slightly tended to increase as the salt concentration due to the decrease of green kernel. The percentage of green kernel was significantly lower at 3,000 ${\mu}s\;cm^{-1}$ of salt level than the control.

• Korean Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.172-177
• /
• 2011

The study sought to determine the efficient management of Korean aucha perch by estimating the potential yield (PY), which means the maximum sustainable yield (MSY) based on the optimal stock, in the mid-upper region of the Seomjin River watershed from August 2008 to April 2009. The stock assessment was conducted by the swept area method and PY was estimated by a modified fisheries management system based on the allowable biological catch. Also, the yield-per-recruit analysis (Beverton and Holt, 1957) was used to review the efficient management of resource, Coreoperca herzi. The age at first capture ($t_c$) was 1.464 age and converted body length was 7.8 cm. Concerning current fishing intensities, the instantaneous coefficient of fishing mortality (F) was estimated to be 0.061 $year^{-1}$; yield-per-recruit analysis estimated the current yield per recruit as 4.124 g with F and $t_c$. The fishing mortality of Allowable Biological Catch ($F_{ABC}$) based on the current $t_c$ and F was estimated to be 0.401 $year^{-1}$, therefore, the optimum fishing intensities could be achieved at the higher fishing intensity for Coreoperca herzi. The calculated annual stock of Coreoperca herzi was 3,048 kg, the potential yield was estimated to be 861 kg with $t_c$ and $F_{ABC}$ at the fixed current level. Using yield-per-recruit analysis, if F and $t_c$ were set at 0.643 $year^{-1}$ and 3 age, respectively, the yield per recruit would be predicted to increase 3.4-fold, from 4.12 g to 13.84 g.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.498-504
• /
• 2006

A suspension polymerization of styrene In aqueous phase was employed to study if polystyrene particles ranging from 1 to $20{\mu}m$ can be produced. Hydrophobic silica was selected as a stabilizer and azo-bisisobutyronitrile (AIBN) as an initiator. Polymerization reaction was carried out at a selected temperature in the range of $65{\sim}95^{\circ}C$. Stabilizer concentration was varied from 0.17 to 3.33 wt% compared to the water while the concentration of the initiator was raised from 0.13 to 6.0 wt% compared to the monomer. Dispersion of hydrophobic silica into the water phase was achieved by precise control of pH. Optimum dispersion of silica was obtained at pH 10. Average particle diameter decreased with increasing amounts of stabilizer concentration initially, exhibiting the minimum average diameter at 1.67 wt% of stabilizer concentration, after which it started to Increase. It is speculated that an excessive presence of stabilizer encouraged a secondary reaction in the reaction medium, which led to particle agglomeration, and as a result an increase in average particle diameter. Molecular weight was found to be independent of stabilizer concentration between 0.13 and 1.00 wt% whereas, it increased when stabilizer concentration exceeded 1.67 wt%. Variation of molecular weight was probably caused by the reduced activity and efficiency of initiator due to the high concentration of silica, and the secondary reaction in the reaction medium, as well. An increase in the Initiator concentration and/or reaction temperature resulted in an increase in both reaction rate and particle diameter. Consequently, we have confirmed that spherical polystyrene particles with $1{\sim}20{\mu}m$ in diameter can be prepared by careful selection of the concentration of stabilizer, initiator, pH and reaction temperature.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.91-99
• /
• 2004

Purpose : For the head and neck radiotherapy, abutting photon field with electron field is frequently used for the irradiation of posterior neck when tolerable dose on spinal cord has been reached. Materials and methods : Using 6 MV X-ray and 9 MeV electron beams of Clinac1800(Varian, USA) linear accelerator, we performed film dosimetry by the X-OMAT V film of Kodak in solid water phantom according to depths(0 cm, 1.5 cm, 3 cm, 5 cm). 6 MV X-ray and 9 MeV electron(1Gy) were exposes to 8cm depth and surface(SSD 100cm) of phantom. The dose distribution to the junction line between photon($10cm{\times}10cm$ field with block) and electron($15cm{\times}15cm$ field with block) fields was also measured according to depths(0 cm, 0.5 1.5 cm, 3 cm, 5 cm). Results : At the junction line between photon and electron fields, the hot spot was developed on the side of the photon field and a cold spot was developed on that of the electron field. The hot spot in the photon side was developed at depth 1.5 cm with 7 mm width. The maximum dose of hot spot was increased to $6\%$ of reference doses in the photon field. The cold spot in the electron side was developed at all measured depths(0.5 cm-3 cm) with 1-12.5 mm widths. The decreased dose in the cold spot was $4.5-30\%$ of reference dose in the electron field. Conclusion : When we make use of abutting photon field with electron field for the treatment of head and neck cancer we should consider the hot and cold dose area in the junction of photon and electron field according to location of tumor.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.652-659
• /
• 2015

The aim of this study was to provide nutrition information to consumers by analyzing crude fat, saturated and trans fatty acids in commercial retort foods (n=70). The following sauce products of curries (n=21) and black-bean-sauces (n=16), other sauces (n=17) and instant cooking foods (n=16) were collected. Crude fat contents were quantified with the Rose-Gottlieb method using acid digestion. While saturated and trans fatty acids were examined by gas chromatography with a flame ionization detector (FID). Crude fat, saturated and trans fatty acid content ranges were $0.47{\pm}0.42{\sim}12.80{\pm}0.07g/100g$, $0.24{\pm}0.02{\sim}17.41{\pm}0.41g/100g$, $0.00{\pm}0.00{\sim}0.46{\pm}0.05g/100g$, respectively. Maximum recovery of analysis values was crude fat (119.7%), saturated fat (119%) and trans fatty acid (90%) compared the actual amounts based on the reference value indicated on the nutrition label. The analyzed samples were found to be compliant with nutrition label standard, because the contents of crude fat, saturated fatty acid, trans fatty acid were less than 120% of the reference value indicated on the nutrition label in retort foods. Therefore, the nutrition information on retort foods available to consumers was found to be trustworthy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1041-1051
• /
• 2005

In order to assure the safety of the seaweeds, we measured the contents of the trace metals in the seaweeds harvested from Korean coastal area. We collected 620 marine algal samples from fourteen areas, and then analyzed the trace metals such as Hg, Cd, Cr, Cu, Mn, Ni, Pb and Zn. The contents of Hg, Cd, Ni and Mn were higher in the seaweeds collected from Chungnam Taean area. The contents of Cr and Cu were higher in the seaweeds collected from Yeongdeok and Tongyeong area, respectively. And Pb and Zn were highly detected from the seaweeds of Ulsan area. The mean levels of trace metals were high in the order of Zn $(48.02\pm41.20{\mu}g/g)\;>\;Mn (34.63\pm38.95{\mu}g/g)\;>\;Cu(6.29\pm6.52{\mu}g/g)\;>\;Ni(2.17\pm4.00{\mu}g/g)\; >\;Cr(1.61\pm2.35{\mu}g/g)\;>\;Pb(1.28\pm2.37{\mu}g/g)\;>\; Cd(0.67\pm0.75{\mu}g/g)\;>\;Hg(0.02\pm0.02{\mu}g/g)$. Zn was consistently most abundant metal in all samples, followed by Mn and Cu, which are very important for human health. There were higher contents of Hg and Cd in brown algae, the contents of Cr, Cu, Mn, Ni and Pb in green algae, the content of Zn in red algae among them. Additionally, significant linear correlations were observed between a total 28 different pairs of metals, of them, the correlation factor between Cr and Ni showed the highest (r=0.374, p<0.001). The trace metal contents of seaweeds varied with habitats and kinds of samples, nevertheless they showed very safe level in edible seaweeds tested. Scytosiphon lomentaria, which has been known as a little use of food, have shown a clear selectivity for Cr and Pb. Among non-edible seaweeds, Sargassum thunbergii for both Cd and Mn, Lomentaria hakodatensis for Ni and Grateloupia prolongata for Zn have shown a clear selectivity, respectively. Therefore, these seaweeds could be useful as bioindicator for each trace metal pollution.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.3
• /
• pp.241-249
• /
• 2013

This study was aimed to provide the fundamental data about oxidized hair color products. For this reason, we collected 125 oxidized hair color products, which were distributed in domestic market from January to October, 2012, and measured the heavy metal concentrations of lead, arsenic, cadmium, chromium, manganese, nickel, copper in the samples. Results were compared by domestic, foreign, henna, type and color. The average metal concentrations were as follows; 0.211 ${\mu}g/g$ for lead, 0.008 ${\mu}g/g$ for cadmium, 0.051 ${\mu}g/g$ for arsenic, 0.954 ${\mu}g/g$ for chromium, 6.250 ${\mu}g/g$ for manganese, 0.591 ${\mu}g/g$ for nickel and 0.544 ${\mu}g/g$ for copper. In case of lead and arsenic, the concentrations were much less than the regulated amount (20 ${\mu}g/g$ and 10 ${\mu}g/g$, respectively) suggested by MFDS (Ministry of Food and Drug Safety). In henna (p < 0.05), the concentrations were significantly higher than those of other domestic and foreign oxidized hair color products as follows; 1.264 ${\mu}g/g$ for lead, 0.267 ${\mu}g/g$ for arsenic, 0.025 ${\mu}g/g$ for cadmium, 4.055 ${\mu}g/g$ for chromium, 72.044 ${\mu}g/g$ for manganese, 3.076 ${\mu}g/g$ for nickel and 4.640 ${\mu}g/g$ for copper. Statistically, it showed that the heavy metal concentrations were quite different for the different types of hair color products. The cream and liquid type products had the highest average concentration in chromium (0.708 ${\mu}g/g$, 0.478 ${\mu}g/g$, respectively). On the other hand, powder type products showed the highest concentration in manganese (60.041 ${\mu}g/g$). In addition, the concentrations of heavy metals and the color of products are not quite correlated. It was shown that average concentrations of lead and chromium were higher for yellow, chromium for red and pink, manganese for brown and black, and nickel for green.