• Journal of Preventive Medicine and Public Health
• /
• v.13 no.1
• /
• pp.3-12
• /
• 1980

Certain heavy metals which may lead peoples to poisonous status are widely used in industry and their uses have been increasing along with rapid industrialization of this country. Such an increasement of metal uses aggravates the status of environmental pollution affecting foodstuffs which are the most important life supporting factor of animal and humanbeing. Concerning the safety measures to minimize food-borne transmission of such hazardous metals, surveillance is the backbone of them and probably more so with a potential problem such as intoxication. Theoretically, this surveillance should include the determination of levels of heavy metal toxicants in foods, the determination of food consumption patterns and typical total diet, and the estimation of total load of the metal contaminant from all sources of exposure including air, water, and occupational sources. In recent year, actually, such estimates on the total daily intake of some heavy metals from foods have been made in several developed countries and a wide variation of date by season, locality, and research method was recognized. Also in this country, this kind of research data is vitally needed to make up for the serious shortage or lack of references to estimate the total amount of heavy metal intake of the people. In this study, a modification model for estimation of the total daily intake of cadmium copper, nickel, zinc, and lead through foods was applied and concentrations of the above metals in crops cultivated in this country were measured with atomic absorption spectro photometer to get the following results. 1. Level of heavy metal concentration in crops Generally, the levels of such metals in essential crops such as rice, cucumber, radish. chinese cabbage, apple, pear, grape, and orange are similar or lower than those in Japan and other developed countries. By the way, a striking result on cadmium concentration was increasement of its concentration in rice from $0{\sim}0.035ppm$ in 1970 to 0.11ppm in this study. However, the value is still far below the. Japanese Permissible Lebel of 1.0ppm. 2. Estimation of total daily intake per capita from foods A new model for estimation was devised utilizing levels of metal concentration in foods, amount of food consumed, and other food factors. Based on the above method, the daily intake of cadmium was estimated to be $70.53{\mu}g/man/day$ in average which was as high as the Limit Value of ILO/WHO(up to $71.4{\mu}g/man/day$). Also, 3.89mg of Zinc, 1.65mg of cuppor, 0.32mg of lead were given as the total daily intake per capita by this research. 3. Efficacy of washing or skinning to decrease the amount of metals in crops After washing the crops sufficiently with commercial linear alkylate sulfonate, the concentration of heavy metals could be reduced to $50{\sim}80%$ showing decreasement rate of $20{\sim}50%$. Also, after skinning the fruits, decreasement rate of the heavy metal concentration shelved $0{\sim}50%$.

• Journal of Korea Water Resources Association
• /
• v.36 no.3 s.134
• /
• pp.385-398
• /
• 2003

The concept of the effective storage ratio has been suggested to determine the size of detention pond by the previous researchers. The 11 pump - pond facilities in Dongdu-chun city were selected to analyze the critical duration for design rainfall and the storage ratio for each rainfall duration in this study It has been then found that the criteria of the maximum storage ratio is not reasonable for determining the size of detention pond because the difference of storage ratio with respect to each rainfall duration is too small. Moreover, since the size of pond compared with the pump capacity is not always big enough, the pump should be frequently operated, which may result in pump failure. Thus, the pond should be sufficiently sized to prevent the possibility of the pump failure due to frequent operation. According to the analyses for changing pump capacity, it has been found that if the function of the pond compared with the pump is concentrated, determining the size of pond based on the storage ratio is operationally feasible for even small basin. Thus, an improved procedure based on the storage ratio for determining the size of detention pond in small basin has been suggested. The results by the proposed procedure considering pump switching frequency may lead to reasonable pump operation. A simple linear programming model has been also adopted to figure out the relationship between pump capacity and pond size. It has been shown that the determination lot the size of detention pond based on conventional hydrologic flood routing in pond is feasible for only urban districts not rural areas.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.789-795
• /
• 2002

To evaluate the bind rate and behavior of two types chloride ion-one is the chloride ion added in mixture when un-washed sea sand is used as fine aggregate, one is the chloride ion admitted in the new version of concrete standard specification, pore solution extracted in cement paste were analyzed. The results are follow. 1 As passing the time, the chloride concentration in the pore solution decreases with the Increase in the chloride content absorbed by the hydrate products. As compared with chloride contents in mixing water, the bound ratio of chloride at 49 days is 64∼90％. 2. The bound ratio of chloride in cement paste considering evaporable water as pore solution is obtained. In case of Pl∼P3(added chloride content wt of cement 0.046∼0.16 ％), the bound ratio of chloride is 91.8∼93.5 ％. P4(added chloride wt of cement 0.3％) is 89.1％, but P5(added chloride wt of cement 0.617％) bound is only 77％. 3. The bound ratio of chloride to wt of cement is 0.015∼0.475％ with adding chloride. In case chloride added over 0.091 ％ wt of cement, the bound chloride content increases 1.7∼1.8 times in spite of added chloride increase twice. The bound ratio of chloride to wt of cement decreased with the increase in the chloride content. 4. The more increase added chloride content, the more increase the bound ration of chloride. But the absolute value of chloride content in pore solution increased.

• Journal of the Korea Concrete Institute
• /
• v.13 no.1
• /
• pp.46-53
• /
• 2001

Two full scale precast pretensioned dapped ended rectangular beams designed by PCI design handbook for a major domestic live load of market and parking building - 500kgf/㎡ and 1,200kgf/㎡ were investigated experimentally. The bottom length of beams was 60cm which was same to the length of rectangular column in the base of five-story market or parking buildings. The height of dap was web hight plus half of the flange height within the allowable limit of PCI method. Shear tests were performed on four beam ends. Followings were obtained from the experimental study. All of the specimens were fully complied with the PCI design handbook. Two of four specimens which were designed for live load of 1,200kgf/㎡ showed crackings at the re-entrant corner of dap before the full service loadings, and failed by direct shear at the load level much less than their calculated nominal strength. The specimens designed for live load of 1,200kgf/㎡ failed at 772 tonf and 78.36tonf by direct shear crackings. This strength was less than PCI limit of 81.9 tonf and higher than ACI limit of 65.62tonf. Thus, the limit suggested by ACI seems more reasonable in regard of safety in view of this test results. According to load-strain curves, the strain of hanger reinforcement reached almost yield strain. It is recommended to use more inclined hanger reinforcement of improve the strength and serviceability.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.65-74
• /
• 2018

The degree of compaction of embankments is generally measured using the sand replacement method or a soil density gauge. However, these methods include coarse particles, which are relatively large. The degree of compaction is overestimated if the in-situ soil density is simply compared with the density obtained from a Proctor compaction test (KS F 2312, 2001), because the density of coarse particles is higher than that of soil. However, there is no recommended correction for the coarse particle ratio in Korea, thus intentionally increasing the degree of compaction for structures to which large loads are applied or for which compaction is critical. Here, a correction considering the Korean Proctor compaction test and the difference between the maximum allowable particle sizes was recommended after corrections for coarse particle ratios in other countries were collected and analyzed. The degree of compaction was re-estimated by applying the recommended correction to the results of both Proctor compaction and sand replacement tests. The degree of compaction without the correction of coarse particle ratio was overestimated, because the re-estimated degree of compaction decreased as the coarse particle ratio increased. The relatively accurate results obtained from the field application of the correction will offer long-term cost savings due to reduced maintenance fees during operation.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.99-114
• /
• 2005

In Part I of this paper, a conceptual approach of the stress path method was newly proposed for a rational estimation of settlements of saturated clay deposits. A detailed procedure for effective evaluation and use of settlement-related characteristic deformation behaviors was developed in order to provide practicality to the new approach. In this Part II, on the basis of the results of Part 1, the concept of the new approach was embodied in the form of a detailed settlement estimation procedure. The applicability and usefulness of the new procedure were strongly supported by various application examples. In addition, possible errors of other conventional settlement estimation methods were investigated by comparing with the new procedure. Because of its flexible applicability for wide range of field conditions, the new procedure will have great usefulness in the practical side. For example, a reasonable foundation design based on allowable settlement criteria can be easily performed and modification of design factors can be readily reflected even during the subsequent construction stage. Especially, the new procedure will be of great use for preliminary work in a large scale construction site where various structures are planned to be constructed on a nearly identical ground condition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1759-1766
• /
• 2013

In this study, the optimal conditions for salmon hydrolysate using squid liver and compositional properties of hydrolysate were investigated. The optimal conditions were $55^{\circ}C$, pH 5.5 and 0.66~0.67% (w/w) in the ratio of squid liver to acidic and thermal treated salmon muscle. The free amino acid of hydrolysate from the acidic treated salmon muscle was higher than that of hydrolysate from the thermal treated salmon muscle, while the total amino acid and mineral were high in the acidic treated salmon muscle. Furthermore, cadmium of hydrolysate from the thermal denatured salmon muscle was below 2 ppm, and has an acceptable level as potential ingredient. The distribution of peptide molecular weight was 40.0% for 1.0~9.5 kDa, 6.7% for 0.5 kDa, and 47.4% of others in hydrolysate from the thermal treated salmon muscle. Both hydrolysates did not show any toxicity against the HepG2 cell line for up to $200{\mu}g/mL$.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.207-213
• /
• 2013

BACKGROUND: This study was conducted to develop analytical method with reproducibility, accuracy and applicability to agricultural products than the existing methods. METHODS AND RESULTS: Mean recoveries of thidiazuron ranged from 89.2 to 91.2 in hulled rices, 87.2 to 92.1 in peppers, from 76.4 to 86.9 in potatoes, from 91.2 to 95.7 in watermelons, from 86.5 to 88.5 in kiwi fruits, and from 89.5 to 94.0 in grapes, with less than 10% of relative standard deviations. In addition, the limit of quantitation was set to be 0.05 mg/kg and there were no interfering peaks in integrating the thidiazuron peak. CONCLUSION(S): These results represent that the enhanced analytical method has reliable accuracy, precision, selectivity, and sensitivity.

• Explosives and Blasting
• /
• v.28 no.1
• /
• pp.27-39
• /
• 2010

Blast design equations based on the concept of scaled distances can be obtained from the statistical analysis on measured peak particle velocity data of ground vibrations. These equations represents the minimum scale distance of various recommendations for safe blasting. Two types of scaled distance widely used in Korea are the square root scaled distance (SRSD) and cube root scaled distance (CRSD). Thus, the design equations have the forms of $D/\sqrt{W}{\geq}30m/kg^{1/2}$ and $D/\sqrt[3]{W}{\geq}60m/kg^{1/3}$ in the cases of SRSD and CRSD, respectively. With these equations and known distance, we can calculate the maximum charge weight per delay that can assure the safety of nearby structures against ground vibrations. The maximum charge weights per delay, however, are in the orders of $W=O(D^2)$ and $W=O(D^3)$ for SRSD and CRSD, respectively. So, compared with SRSD, the maximum charge for CRSD increases without bound especially after the intersection point of these two charge functions despite of the similar goodness of fits. To prevent structural damage that may be caused by the excessive charge in the case of CRSD, we suggest that CRSD be used within a specified distance slightly beyond the intersection point. The exact limit is up to the point, beyond which the charge difference of SRSD and CRSD begins to exceed the maximum difference between the two within the intersection point.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.1-5
• /
• 2011

It is possible that veterinary medicines remain in livestock food products, according to the use of many and various veterinary medicines to protect against disease when livestock animals are breed in limited space. Concentrated and continuous monitoring of residues is needed due to increases in resistance to antibiotics and side effects by eating livestock food products. We developed an analysis method for detecting streptomycin, dihydrostreptomycin, neomycin, gentamicin and spectinomycin in meat using LC/MS/MS and measured sensitivity, precision, accuracy, linearity and recovery according to CODEX guidelines to acquire confidence in the analysis method. Based on the results, we acquired good sensitivity compared to the maximum residue limit (MRL) as limits of detection (LOD) were 0.002-0.016 mg/kg and limits of quantification (LOQ) were 0.006-0.050 mg/kg. The analysis method satisfied the CODEX guidelines. The linearity ($r^2$) values of aminoglycoside antibiotics were 0.9936-0.9980, recoveries were 60-110% and relative standard deviations (RSD) were within 15%. As a result of monitoring for residues in a total 250 samples of livestock foods such as pork, chicken, and beef by the confirmed method, dihydrostreptomycin and gentamicin were detected in 5 pork samples. The residues of these antibiotics were within the MRLs. Thus, the detection ratio was 2% as 5 samples were identified from 250 samples.