• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.135-148
• /
• 2019

Although the technology for the observation of solar radiation is rapidly developing worldwide, in Korea the guidelines for comparing observations of solar radiation are only now under preparation. In this study, a procedure for intercomparison observations of solar radiation was established which accounts for meteorological and geographical conditions. The intercomparisons among observations by national reference pyranometers were carried out at the Asia Regional Radiation Center, Japan, in 2017. Recently, the result of the calibration of the reference pyranometer of the Korean Meteorological Administration (KMA) has been reported. Using the KMA pyranometer as a reference, comparisons between observations and calibrations were carried out for the standard (B to J) pyranometers of the KMA, and for the reference (A) and the standard pyranometers of the Gangneung-Wonju National University. The intercomparisons were carried out between October 24 and October 25, 2018. The sensitivity constants were adjusted according to the results of the data analysis performed on October 24. On October 25, a post-comparison observation was also performed, and the data of the participating pyranometers were verified. The sensitivity constants were calculated using only data corresponding to a solar radiation of $450.0W\;m^{-2}$ or higher. The B and I pyranometers exhibited a small error (${\pm}0.50W\;m^{-2}$), and the applied sensitivity constants were in the range $0.08-0.16{\mu}V(W\;m^{-2})^{-1}$. For the C pyranometer, the adjustment of the sensitivity constant was the largest, i.e., $-0.16{\mu}V(W\;m^{-2})^{-1}$. As a result, the nine candidate pyranometers could be calibrated with an average error of $0.06W\;m^{-2}$ (0.08%) with respect to the KMA reference, which falls within the allowed tolerance of ${\pm}1.00%$ (or ${\pm}4.50W\;m^{-2}$).

• Journal of Korean Philosophical Society
• /
• v.145
• /
• pp.351-380
• /
• 2018

In every society, citizens must decide how to punish criminals, uphold the virtue of justice, and preserve the security of the community. In doing so, the members of society must ask themselves how they will punish those who carry out the most abhorrent of crimes. Many common responses to such a question is that death is an acceptable punishment for the most severe crimes. But to draw some theoretical distinction between a crime that deserves incarceration and a crime that is so heinous that it deserves capital punishment is subject to three errors. First, what possible line could be drawn? To decide on a particular number of deaths or to employ any standard would be arbitrary. Second, the use of a line would trivialize and undermine the deaths of those whose murderers fell below the standard. Third, any and all executions still are unjust, as the State should not degrade the institution of justice and dehumanize an individual who, although he or she has no respect for other human life, is still a living person. Simply put, all murders are heinous, all are completely unacceptable, and deserve the greatest punishment of the land; however, death as punishment is inappropriate. Also, while this article arrives at the conclusion that the death penalty is an inappropriate form of punishment, I have not offered an acceptable alternative that would appease those who believe capital offenders deserve a punishment that differs in its quality and severity. This is a burden that, admittedly, I am unable to meet. I finally conclude that the death penalty is unjustified retribution. This is the only claim that can effectively shift the intellectual paradigms of the participants in the debate. The continued use of the death penalty in society can only be determined and influenced by the collective conscience of the members of that society. As stated at the outset of this article, it is this essentially moral conflict regarding what is just and degrading that forms the backdrop for the past changes in and the present operation of our system of imposing death as a punishment for crime.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.457-463
• /
• 2023

To investigate residual pesticide levels in agricultural products contained in Meal-kits, 27 Meal-kit products were collected from marts, Meal-kit shops, and online stores in Incheon City, South Korea. Seventy-six vegetable and thirty-seven mushroom products were analyzed for residual levels of 339 pesticides. Residual pesticides were detected in 23 out of 76 vegetables and were not present in the 37 mushroom products. The residual pesticide detection rate was 20.4% (23/113 cases). The pesticides famoxadone 0.034 mg/kg (standard: 0.01 mg/kg or less, PLS) and fenpyroximate 0.302 mg/kg (standard: 0.01 mg/kg or less, PLS) exceeded their maximum residue levels (MRL). This survey revealed that various types of pesticides remain in agricultural products in Meal-kits. Due to the nature of Meal-kit products, there is no separate standard for residual pesticides in agricultural products. Therefore, continuous monitoring of residual pesticides is necessary.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.677-688
• /
• 2007

돼지를 포함한 대부분의 동물은 일정한 발정주기를 가지고 일정한 시기에 배란을 하는 자연배란동물이지만, 토끼, 고양이, 밍크 등의 암놈은 교미자극에 의해 배란이 일어나는 유기배란동물이다. 또한 1년에 한 번만 발정하는 단발정동물과 1년에 수차례 발정하는 다발정동물이 있다. 이 중에서 모돈은 1년에 수차례 발정하는 다발정 동물로서 발정기에 들면 비발정기와는 다른 행동을 나타낸다(Diehl 등, 2001). 양돈가의 수익을 최대화하기 위해서는 비생산일수를 최소로 줄여야 한다. 모돈의 비생산일수를 줄일 수 있는 한 가지 방법은 성공적으로 교배를 시키는 것이다. 이처럼 성공적으로 교배를 시키기 위해서는 수정적기를 정확히 예측해야 한다. 만약 수정적기를 정확히 판단하지 못하여 수태가 되지 않으면, 비생산일수가 늘어나 손실을 입게 된다. 따라서 수정적기를 정확히 판단하는 것은 모돈의 성공적인 인공수정에 있어서 중요한 요소이다. 수정적기는 배란이 일어나기 전 10시간에서 12시간 사이이며, 발정이 시작되는 시점을 기준으로 하였을 때 경산돈의 경우 26시간에서 34시간 사이이고 미경산돈의 경우는 18시간에서 26시간 사이이다(Evans 등, 2001). 현재 하루에 두 번 모돈의 발정을 확인하는 것이 일반화되어 있으며, 이 때 웅돈을 접촉시키거나 육안관찰을 통하여 발정 유무를 판단한다. 이러한 방법에는 숙련된 기술과 풍부한 경험이 요구될 뿐만 아니라 총 소요노동력의 30% 정도가 요구된다(Perez 등, 1986). 하루에 두 번밖에 발정을 감지하지 않기 때문에 발정이 언제 시작되었는지를 정확히 알 수 없으며, 또한 발정의 대부분이 새벽에 시작되므로 수정적기를 정확히 판단하기란 매우 어렵다. 만약 발정을 감지했더라도 적기에 인공수정을 하지 못한다면, 수태율이 낮아지므로 경제적 손실이 초래된다. 현재 이러한 문제점 때문에 2회에서 3회에 걸쳐 인공수정을 하고 있으나 이에 따른 소요비용과 소요노동력 등은 양돈가의 부담을 가중시키는 요인이 되고 있다. 돼지는 발정기가 되면 비발정기에 나타내지 않던 외음부의 냄새를 맡는 행동, 귀를 세우는 행동 및 승가허용 행동 등을 나타낸다(Diehl 등, 2001). 또한 돼지는 비발정기에 비하여 발정기에 더 많은 활동량을 나타낸다(Altman, 1941; Erez and Hartsock, 1990). Freson 등(1998)은 스톨에서 개별적으로 사육되고 있는 모돈의 활동량을 적외선센서를 이용하여 측정함으로써 발정을 86%까지 감지하였다고 보고하였다. 그러나 이 연구는 단지 모돈의 발정을 감지하였을 뿐 번식관리에 있어서 가장 중요한 수정적기의 판단 기준을 제시하지 못하였다. 따라서, 본 연구는 스톨에서 사육되는 모돈의 활동량을 측정함으로써 발정시작시각을 감지하고 이를 기준으로 인공수정적기를 예측할 수 있는 인공수정적기 예측 장치를 개발한 후 이의 성능을 농장실증실험을 통하여 시험하고자 수행되었다.

• The Korean Journal of Pesticide Science
• /
• v.14 no.2
• /
• pp.95-103
• /
• 2010

Fomesafen is a selective herbicide, and used to control annual and perennial broad-leaf grass on soybean and fruit fields in USA and China, but not introduced in Korea yet. So, MRL (Maximum Residue Level), and analytical method of fomesafen were not establishment in Korea. Therefore, this experiment was conducted to establish a determination method for fomesafen residue in crops using HPLC-UVD/MS. Fomesafen residue was extracted with acetone from representative samples of five raw products which comprised hulled rice, soybean, apple, green pepper, and Chinese cabbage. The extract was diluted with saline water, and dichloromethane partition was followed to recover fomesafen from the aqueous phase. Florisil column chromatography was additionally employed for final clean up of the extract. The fomesafen was quantitated by HPLC with UVD, using a Shiseido CAPCELL-PAK UG C18 column. The crops were fortified with fomesafen at 3 levels per crop. Mean recovery ratio were ranged from 87.5% for a 0.4 ppm in hulled rice to 102.5% for a 0.4 ppm in apple. The coefficients of variation were ranged from 0.6% for a 2.0 ppm in hulled rice to 7.7% for a 0.04 ppm in green pepper. Quantitative limit of fomesafen was 0.04 mg/kg in representative 5 crop samples. A LC/MS with selected-ion monitoring was also provided to confirm the suspected residue. Therefore, this analytical method was reproducible and sensitive enough to determine the residue of fomesafen in agricultural commodities.

• The Korean Journal of Pesticide Science
• /
• v.19 no.4
• /
• pp.354-360
• /
• 2015

In recent years, Allium victorialis has been extensively used as a pharmacological agent for various diseases in the form of anti-arteriosclerotic, anti-diabetic and anti-cancer. Allium victorialis is severely affected by various fungal diseases since it naturally grow in the shady and humid environments in Korea. In this case, different types of fungicides are applied to control the fungal diseases in Allium victorialis. The present study was aimed to determine the residual characteristics of two fungicides namely tebuconazole and fludioxonil on Allium victorialis. For this study, the fungicides were drenched soil on Allium victorialis in the cultivation area Pyeongchang by the standard (two thousand fold) and double (thousand fold) dilutions. At the end of $15^{th}$, $30^{th}$ and $40^{th}$ days samples were collected for residue analysis. Residues of tebuconazole and fludioxonil were analyzed using GC/NPD (Gas Chromatography/Nitrogen Phosphorus Detector) and their recovery were found to be 108.8~119.5% and 91.3~104.8%, respectively. The method of limits of quantification for both fungicides was $0.01mg\;kg^{-1}$. Further, the results of this study shows that the residue levels of both fungicides on Allium victorialis were <$0.01{\sim}0.12mg\;kg^{-1}$ and $0.01{\sim}0.09mg\;kg^{-1}$ and their % ADI (% Acceptable Daily Intake) were 17.44% and 25.75%, respectively. Based on the results obtained in this study, we suggest that the residue levels of both of the fungicides on Allium victorialis are safe and these fungicides can also be used to control fungal diseases in Allium victorialis.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.57-67
• /
• 2013

Purpose: Replacing the film which used to be used for checking the set-up of the patient and dosimetry during radiation therapy, more and more EPID equipped devices are in use at present. Accordingly, this article tried to evaluated the accuracy of the position check-up and the usefulness of dosimetry during the use of an electronic portal imaging device. Materials and Methods: On 50 materials acquired with the search of Korea Society Radiotherapeutic Technology, The Korean Society for Radiation Oncology, and Pubmed using "EPID", "Portal dosimetry", "Portal image", "Dose verification", "Quality control", "Cine mode", "Quality - assurance", and "In vivo dosimetry" as indexes, the usefulness of EPID was analyzed by classifying them as history of EPID and dosimetry, set-up verification and characteristics of EPID. Results: EPID is developed from the first generation of Liquid-filled ionization chamber, through the second generation of Camera-based fluoroscopy, and to the third generation of Amorphous-silicon EPID imaging modes can be divided into EPID mode, Cine mode and Integrated mode. When evaluating absolute dose accuracy of films and EPID, it was found that EPID showed within 1% and EDR2 film showed within 3% errors. It was confirmed that EPID is better in error measurement accuracy than film. When gamma analyzing the dose distribution of the base exposure plane which was calculated from therapy planning system, and planes calculated by EDR2 film and EPID, both film and EPID showed less than 2% of pixels which exceeded 1 at gamma values (r%>1) with in the thresholds such as 3%/3 mm and 2%/2 mm respectively. For the time needed for full course QA in IMRT to compare loads, EDR2 film recorded approximately 110 minutes, and EPID recorded approximately 55 minutes. Conclusion: EPID could easily replace conventional complicated and troublesome film and ionization chamber which used to be used for dosimetry and set-up verification, and it was proved to be very efficient and accurate dosimetry device in quality assurance of IMRT (intensity modulated radiation therapy). As cine mode imaging using EPID allows locating tumors in real-time without additional dose in lung and liver which are mobile according to movements of diaphragm and in rectal cancer patients who have unstable position, it may help to implement the most optimal radiotherapy for patients.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.3
• /
• pp.248-254
• /
• 2012

BACKGROUND: In order to elucidate residual characteristics of difenoconazole and thiamethoxam by treatment to sweet persimmons for one year and to generate the data for the maximum residue limit (MRL) establishment for those pesticides in or on sweet persimmon. METHODS AND RESULTS: Systemic fungicide difenoconazole WP (10% a.i.) and systemic insecticide thiamethoxam WG (10% a.i.) were sprayed onto 12~25-years-old sweet persimmons according to its preharvest interval (PHI), respectively, and then fresh sweet persimmons were harvested at 0, 1, 3, 7, 14, 21 days after treatment from pesticide-sprayed plots at each 3 sites. The analytical methods were evaluated to limit of quantification, linearity, specificity, reproducibility and recoveries. The crop samples were extracted with acetone and performed dichloromethane partition process. The extracted samples of difenoconazole were analyzed by GC-ECD and the thiamethoxam extracted samples were analyzed by HPLC with good sensitivity and selectivity of the method. The average recoveries of difenoconazole ranged from 87.5 to 99.5% with the percentage of coefficient variation in the range 4.1~7.6% at three different spiking levels(0.02, 0.2 and 2.0 mg/kg). And the average recoveries of thiamethoxam and clothianidin ranged from 88.8 to 98.9% and 83.2 to 96.6% with the percentage of coefficient variation in the range 3.6~5.0% and 3.8~9.4% at three different spiking levels(0.02, 0.2 and 2.0 mg/kg), respectively. The residue amounts ranges of difenoconazole were 0.2~0.56 mg/kg and the residue amount was decreased below the MRL level, 1.0 mg/kg, after 1 day harvest. The residue amounts ranges of thiamethoxam were 0.08~0.28 mg/kg and the residue amount was decreased below the MRL level, 0.5 mg/kg, after 1 day harvest. And the residue amount of clothianidin was below then 0.03 mg/kg for only one test site of 14 and 28 day samples. CONCLUSION: As a result, the residual amounts of difenoconazole and thiamethoxam were not exceeded the MRL of established criteria for sweet persimmon. The biological half-lives of difenoconazole and thiamethoxam were 13.6, 19.4, 16.3 and 10.0, 15.3, 14.0 days at each three test sites, respectively.

• Journal of Food Hygiene and Safety
• /
• v.35 no.2
• /
• pp.136-145
• /
• 2020

This study was conducted to evaluate pesticide residues and foreign metallic matter on a total of 104 powdered agricultural products in Incheon. Residue testing for 373 pesticides was conducted by GC-MS/MS, LC-MS/MS, GC-ECD, GC-NPD and HPLC-UVD. Foreign metallic matter was detected by magnetic rod. As a result pesticide testing, 7 of the 104 products were found to be within the MRL of the pesticides. The detected pesticides were chlorpyrifos, etofenprox, fenoxanil, malathion, permethrin, tebuconazole and tetraconazole. As for foreign metallic matter, 16 samples were above the allowable limits set by Korean regulations. Therefore, the inspection of residual pesticides in raw material, and the removal of foreign metallic matter will require further stringent attention for the safety of powdered agricultural products.

• Journal of the Society of Disaster Information
• /
• v.13 no.2
• /
• pp.233-248
• /
• 2017

Uniform laws and regulations and reasonable design is necessary for the prevention of possible fire in super high-rise building. To this end, this study focused on super high-rise and massive building-related architectural review performance-based design (PBD) evaluation disaster impact assessment (DIA), and provided fire engineering measures for improving fire prevention on the basis of performance-based design by analyzing the buildings subject to these systems and problems in terms of contents. Above all, in the aspect of law and standard improvement, first, with regard to dual parts of two statutes though significant portion of them has the same contents in performance-based design (PBD) evaluation and disaster impact assessment (DIA), it is necessary to operate the systems after making them conform with each other and consolidating or abolishing them. Second, if it is impossible to consolidate or abolish performance-based design (PBD) evaluation and disaster impact assessment (DIA), the areas of contents of performance-based design (PBD) evaluation and disaster impact assessment (DIA) should be precisely classified and established. Next, engineering improvement measures against fire hazard in super high-rise building are as follows. First, it is necessary to revise the provisions of straight-run stairs in special escape stairs. And in case of installing a mechanical smoke exhaust system instead of smoke vent, sandwich pressurization used in the United Stated should be permitted. Second, with regard to smoke control system for special escape stairs, it was shown that there was necessity for revising the standards in order to enable air to be supplied according to section in case of fire, carrying out performance-based design, and the like from the early design stages to the completion stages. In the future, it is expected that an epoch-making contribution will be made to a decrease in casualties and property damage due to fire in case of super high-rise building where the results can be reflected after carrying out a study on maintenance and carrying out an additional study on other considerations of super high-rise building together with reflecting the improvement measures provided in the above-mentioned study.