• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.4
• /
• pp.457-471
• /
• 2015

A domestic cutterhead with the diameter of 3.6 m was designed and manufactured in this study. Then, it was attached to an existing earth-pressure balanced shield TBM to excavate a cable tunnel with the length of 1,275 m. Especially, the procedures for TBM cutterhead design and its corresponding performance prediction were also summarized. From field data analyses of the refurbished shield TBM, its maximum advance rate was recorded as 14.4 m/day. Penetration depths of disc cutters were found to be approximately 4 mm/rev, which is equal to the maximum penetration depth designed for the strongest rock strength condition in the target tunnel. Every TBM operating thrust and cutter normal force during TBM driving was much smaller than their corresponding maximum capacities. When cutter acting forces recorded in the field were analyzed, their prediction errors by the CSM model were very high for weak rock conditions. In addition, rock strength showed very close relationships with cutter normal force and penetration depth.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.11-19
• /
• 2016

Two representative residual static methods of traveltime decomposition and stack-power maximization are discussed in terms of application to land seismic data. For the model data with synthetic shot/receiver statics (time shift) applied and random noises added, continuities of reflection event are much improved by stack-power maximization method, resulting the derived time-shifts approximately equal to the synthetic statics. Optimal parameters (maximum allowable shift, correlation window, iteration number) for residual statics are effectively chosen with diagnostic displays of CSP (common shot point) stack and CRP (common receiver point) stack as well as CMP gather. In addition to removal of long-wavelength time shift by refraction statics, prior to residual statics, processing steps of f-k filter, predictive deconvolution and time variant spectral whitening are employed to attenuate noises and thereby to minimize the error during the correlation process. The reflectors including horizontal layer of reservoir are more clearly shown in the variable-density section through repicking the velocities after residual statics and inverse NMO correction.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.94-98
• /
• 2006

An optical microphone based on a dual-core fiber collimator and a membrane type micromirror serving as an optical head and a reflective diaphragm respectively was implemented. The micromirror diaphragm is suspended by a thin silicon bar linked with a frame, thus it is subject to a displacement induced by acoustic waves. The optical head incorporating two collimators integrated in a single housing gives light to and receives it from the diaphragm, rendering the optical microphone structure simple and compact. This dual-core collimator having a slowing varying beam profile facilitates the initial alignment of the optical head with the diaphragm, especially the distance between them. For the assembled microphone, the static characteristics were investigated tofind the operation point defined as the optimum distance between the head and the diaphragm, and a frequency response with a variation of about $\pm$5 dB for the range of up to 3kHz was achieved.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.969-978
• /
• 2004

According to the report of hydrologic modeling study, from a quantitative point of view, a lumped model is more efficient than a distributed model. A distributed model has to simplify geospatial characteristics for the shake of restricted application on computer calculation and field observation. In this reason, a distributed model can not help having some errors of water quantity modelling. However, considering a distribution of rainfall-runoff reflected spatial characteristics, a distributed model is more efficient to simulate a flow of surface water, The purpose of this study is modeling of spatial rainfall-runoff of surface water using grid based distributed model, which is consisted of storage function model and essential basin-channel parameters( slope, flow direction & accumulation), and that procedure is able to be executed at a personal computer. The prototype of this model is developed in Heongseong Multipunose Dam basin and adapted in Hapchon Multipurpose Dam basin, which is larger than the former about five times. The efficiency coefficients in result of two dam basin simulations are more than about 0.9, but ones at the upstream water level gauge station meet with bad result owing to overestimated rating curves in high water level. As a result of this study, it is easily implemented that spatially distributed rainfall-runoff model using GIS, and geophysical characteristics of the catchment, hereafter it is anticipated that this model is easily able to apply rainfall data by real time.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.901-908
• /
• 2006

With the development of wireless communication techniques and mobile environment we are able to transmit data between mobile systems without restriction of time and space. Recently, researches on the data communication between mobile systems have focused on a small amount of sending out or receiving data and data synchronization at a fixed server and mobile clients in mobile environment. However, two more servers should be able to move mutual independently, information is shared with other systems, and data is synchronized in the special environment like a battlefield situation. Therefore, we propose a data synchronization method between systems moving mutual independently in mobile environment. The proposed method is an optimization solution to data propagation path between servers that considers limited bandwidth and process of data for disconnection communication. In addition, we propose a data reduction method that considers importance and sharing of information in order to reduce data transmission between huge servers. We verified the accuracy of data after accomplishing our data synchronization method by applying it in the real world environment. Additionally, we showed that our method could accomplish data synchronization normally within an allowance tolerance when we considered data propagating delay time by server extension.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.230-236
• /
• 2020

A trash screen is installed in front of the inflow channel of a drainage pumping station, sewage treatment plant, and a power plant to block floating contaminants. The bottleneck phenomenon, which decreases the water inflow, causes damage to the damper as a result of clogging in between the screen if string type obstacles are not removed. In this paper, the apron was removed, and the screen was expanded, to prevent breakage of the bottleneck phenomenon and string type obstacles. This was designed using an extended rake by adding an inner rake in between the screen interspace to remove the bottleneck phenomenon and string type obstacles. To design the inner rake that satisfies the allowable stresses of the existing damper rake, the experiment points were determined according to the experimental design method using the inner rake vertical length and the thickness of the reinforced section as parameters. The use of the ANSYS static structural module and statistical analysis tool R software gives the optimized shape according to the response surface method. The relative error between the response surface analysis results and the simulation results was 1.63% of the determined optimal design-point rake length of 210.2 mm and the reinforcement section thickness of 2 mm. Through empirical experiments, a test rake was constructed to the actual size, and approximately 97% of the bottleneck phenomenon and string type obstacles could be removed.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.68-73
• /
• 1984

The purpose of this paper was to figure out the efficiencies of two sampling techniques, a simple random sampling and a two-stage P.P.S. (probability proportional to size) sampling, in estimating the volume of the mature coniferous stands near Salzburg, Austria. With black-and-white infrared photographs at a scale 1:10,000, the following four classes were considered; non-forest, young stands less than 40 years, mature beech and mature coniferous stands. After the classification, a field survey was carried out using a relascope with a BAF (basal area factor) 4. For the simple random sampling, 99 points were sampled, while for the P.P.S. sampling, 75 points were sampled in the mature coniferous stands. The following results were obtained. 1) The mean standing coniferous volume estimate was $422.0m^3/ha$ for the simple random sampling and $433.5m^3/ha$ for the P.P.S. sampling method. However, the difference was not statistically significant. 2) The required number of sampling points for a 5% sampling error were 170 for the two stage P.P.S. sampling, but 237 for the simple random sampling. 3) The two stage P.P.S. method reduced field survey time by 17% as compared to the simple random sampling.

• Environmental and Resource Economics Review
• /
• v.24 no.3
• /
• pp.523-549
• /
• 2015

This paper investigates an oil refiner's asymmetric behavior in the adjustments of gasoline and diesel prices to changes in his own price and his rivals' prices as well as input costs. An asymmetric error correction model which allows a firm's pricing behavior to the deviation of other firms' prices from their long-run equilibrium level is employed for estimation using weekly data for the period April 2009 to January 2015. Evidence is found that there is a significant degree of asymmetry in the adjustment of wholesale prices to changes in crude oil price. A similar result in regard to the exchange rate is also found by the data. The estimation results for firm's response to changes in other firms' prices indicates that implicit collusion could be more easily exploited in the wholesale petroleum market as results of firms' interaction with each other and anticipation of rivals' pricing behavior. A few refiners show competitive price adjustment in response to the upward deviation of the others' prices from their equilibrium level.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.41-43
• /
• 2005

Purpose : Wish to present degree management process that is efficient confirm radiation treatment exclusive use CT simulator's Q.A item that become Q.A and Differentiation of diagnosis area that present Report of the AAPM Task Group No.66 using Q.A tool that produce itself and secure safe and correct CT-simulation process and equip convenience. Method and material : Manufacture CT simulator's Q.A tool on source and confirm virtue between isocenter of wall laser system, patient table, CT scanner's imaging plane that present in Report of the AAPM Task Group No.66 by daily publication unit. Result : Confirmed measured value from Report of the AAPM Task Group No.66 to confirmation of presenting degree management item in wall laser's ${\pm}2mm$, table's ${\pm}2mm$, imaging plane's ${\pm}2mm$ tolerance extent. Conclusion : There is unconfirmed item from CT-simulation process for therapy to CT Q.A protocol of existent diagnosis area, premising suitable degree management of radiation treatment exclusive use CT-simulator equipment confirming presenting Q.A item in Report of the AAPM Task Group No.66 safe and correct CT-simulation process guarantee can

• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.7-13
• /
• 2000

Abstract The characteristics of bed rock in the study area was classified by means of the crack coefficient estimated from the seismic velocities of in-situ and intact rocks. Various statistical methods were investigated in order to minimize the possible errors in estimating the predictive equation of blasting vibration and to enhance the determination coefficient $R^2$, for more reliable estimation. The determination coefficient showed the highest in the analysis for those groups using weighting function with the number of samples. The analysis for the weighting function employed with standard coefficient and variance also enhanced the determination coefficients significantly compared to the others, but the reliability was slightly lower than results obtained former method. Therefore the most reliable predictive equation of blasting vibration was found to be obtained from a regression analysis of the mean vibration level using the weighting of same distance groups within 15m with the same explosive charge weight per delay. The coefficients, K and n 317.4 and -1.66, respectively, when using the square root scaling, and 209.9 and -1.66, respectively, when using the cube root scaling. The analysis also showed that the square root scaling may be used in the distance less than 31m form the blast source, and the cube root scaling in the distance more than 31m for safe design.