• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.201-215
• /
• 1993

The health status of workers in a foundry was analyzed in a study which consisted of evaluations of respiratory health together with environmental measurements. The results from environmental measurements showed values exceeding permissible exposure limits. A t-test was done with log transformed and untransformed data to examine the statistical significance for the noncompliance with exposure standards. For the analysis of categorical health outcomes, $\chi$-square test with 2 $\times$ 2 tables and logistic regression analysis were employed. For continuous variables, multiple linear regression was done against assessed risk factors. Pros and cons of different parameters in the compliance (or noncompliance) testing were presented. Respiratory function did not show any relation with occupational exposures, which may be due to the healthy worker effects. Strategies for controlling time dependent covariates were discussed in relation to the healthy worker effect. The scope of statistical analysis in occupational health studies is still limited in Korea without a suitable external comparison group such as credible vital statistics for the whole nation. Internal comparisons between different exposure status often result in unstable estimates of effect, and proportional morbidity study is discussed as an alternative potential research tool.

• Journal of the Korea Institute of Construction Safety
• /
• v.1 no.1
• /
• pp.22-30
• /
• 2018

Construction accidents in Korea are continuously increasing. Safety signs with high visibility color can diminish such accidents in dangerous places. In order for safety color to be more effective as a global communication means in construction sites, it needs to be checked out whether safety color standard reflect the characteristics of construction industry such as worker or work environment. This paper compared safety color standards among Korea, the US, the UK, and Australia. First, blue color was included in all, which should be corrected considering aged workers increasing in construction industry. Because with age, the ability to distinguish between blue, purple, and gray colors decreases. Second, Korea, which has only single code designated to safety colors, should find alternatives like tolerance to be applicable to a variety of light environments on construction sites, as the contrast which affect the visibility may decrease in dark conditions.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.670-676
• /
• 2018

Experiments on combustion gases generation of untreated cypress specimens or treated with boric acid, ammonium pentaborate, and boric acid/ammonium pentaborate additive were carried out. Test specimens were painted three times with 15 wt% boron compound aqueous solutions. After drying, the generation of combustion gas was analyzed using a cone calorimeter (ISO 5660-1). As a result, comparing to untreated specimen, the smoke performance index (SPI) of the specimens treated with the boron compound increased by 1.37 to 2.68 times and the smoke growth index (SGI) decreased by 29.4 to 52.9%. The smoke intensity (SI) of the specimens treated with boron compounds is expected to be 1.16 to 3.92 times lower than that of untreated specimens, resulting in lower smoke and fire hazards. Also, the maximum carbon monoxide ($CO_{peak}$) concentration of specimens treated with boron compounds was 12.7 to 30.9% lower than that of untreated specimens. However, it was measured to produce fatal toxicities from 1.52 to 1.92 times higher than that of permissible exposure limits (PEL) by Occupational Safety and Health Administration (OSHA). The boron compounds played a role in reducing carbon monoxide, but it did not meet the expectation of reduction effect because of the high concentration of carbon monoxide in cypress itself.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.475-481
• /
• 2019

A splint is one of assisting devices for the disabled with hemiplegia or contracture and is manually made by an experienced expert. Heated thermoplastic materials are continuously fitted to the affected part. This traditional method has a possible risk of low-temperature burn, quality variance of the splint due to the proficiency of maker. etc. While various approaches has been made using 3D printing technology in order to redeem those disadvantages, they still carry high cost issues with 3D scanners or accuracy issues with manual measurement. This research begins with symmetrical characteristics of human body and focuses on the preliminary study for the possibility of splint manufacturing with 3D printing technology based on geometric characteristics of unaffected arm. 3D right and left forearm models of healthy male adults were created by photogrammetry software and a series of digital images in order to measure the circumference and cross-sectional area of the forearm models at every 20mm from the elbow. The circumference and cross-sectional area showed tolerable levels of differences between both sides within subjects; The circumference and cross-sectional area showed very strong correlations between both sides within subjects. From these findings, the possibility of splint manufacturing with 3D printing technology could be confirmed based on the geometric characteristics of unaffected side.

• Journal of Convergence for Information Technology
• /
• v.11 no.1
• /
• pp.136-142
• /
• 2021

Open-pit mine development requires continuous management because of topographical changes and there is a risk of accidents if the current status survey is performed directly in the process of calculating the earthwork. In this study, the application of UAV photogrammetry, which can acquire spatial information without direct human access, was applied to open-pit mines development area and analyzed the accuracy, earthwork, and mountain restoration plan to determine its applicability. As a result of accuracy analysis at checkpoint using ortho image and Digital Surface Model(DSM) by UAV photogrammetry, Root Mean Square Error(RMSE) is 0.120 m in horizontal and 0.150 m in vertical coordinates. This satisfied the tolerance range of 1:1,000 digital map. As a result of the comparison of the earthwork, UAV photogrammetry yielded 11.7% more earthwork than the conventional survey method. It is because UAV photogrammetry shows more detailed topography. And result of monitoring mountain restoration showed possible to determine existence of rockfall prevention nets and vegetation. If the terrain changes are monitored by acquiring images periodically, the utility of UAV photogrammetry will be further useful to open-pit mine development.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.1
• /
• pp.49-56
• /
• 2022

In this study, finite element numerical analysis was performed considering various influence factors(cavity shape and size, pavement thickness and size of traffic load) in order to analyze the impact factors in the underground of the road where the cavity occurred and to evaluate the stability of the ground. In order to verify the reliability of the numerical analysis method applied in this study and the results it was compared and analyzed with the results of previous studies and field measurements. The correlation between the influence factors was analyzed through the distribution of vertical displacement obtained from the numerical analysis results, the distribution of surface settlement and surface settlement, the distribution of the stress ratio, and the distribution of the safety factor. As a result, it was confirmed that as the size of the cavity and traffic load increased and the thickness of the pavement decreased, the vertical displacement and surface settlement at the top of the cavity increased. Also, the shape of the cavity was square, the stability of the ground was significantly reduced compared to the case of a circular cavity. Through these results, it was possible to confirm the overall stability of the lower ground of the road where the cavity was generated.

• Informatization Policy
• /
• v.28 no.4
• /
• pp.54-75
• /
• 2021

The right to data portability needs to be introduced to strengthen the self-control of data subjects and promote personal data use. However, the right to data portability constitutes a high risk of invasion of privacy of data subjects and may infringe on the property rights of data controllers, so careful and thorough design is warranted. The right to data portability can intensify the concentration and monopoly of personal data, result in problems of overseas transfer of personal data held by public institutions, and enrich only the profits of giant platforms by burdening the data subject with high transfer cost. By contrast, SMEs are more likely to endure a personal data deprivation. From the proposed amendment to the Personal Data Protection Act are raised various legal issues such as. i) Whether to include inferred/derived data, personal data held by public institutions, activity data, sensitive data, and personal data of third parties within the scope of data portability; ii) whether SMEs are included in the data porting organization; iii) whether to exclude SMEs or large platforms from the scope of the data receiving organization; iv) Whether to allow the right to transmit to other data controllers, v) Whether to allow the overseas transfer of personal data held by public institutions, vi) How to safely exercise the right to data portability, vii) the scope of responsibility and immunity of a data porting organization, etc. The purpose of this paper is to propose the direction for legislative action based on various legal issues related to data portability.

• Food Science and Industry
• /
• v.55 no.1
• /
• pp.58-73
• /
• 2022

Due to the recent demand for low-calorie foods, consumers are looking for alternative sweeteners that can control blood sugar, low risk of tooth decay and low calories. Regulations for permitted sweeteners in food vary from every country, and it is important for the government and the food industry to monitor products containing these sweeteners to ensure global compliance. Therefore, rapid, precise, and accurate analysis for food matrices should be applied to quality control, market surveillance, monitoring, and evaluation of food additive intake in the food industry. To analyze sweeteners simultaneously, it is essential to develop an efficient and rapid analytical method and to perform appropriate pretreatment steps such as solvent extraction and purification. This study presented the recent analysis trends about the suitable extraction method for food matrices focusing on non-nutritive sweeteners. Additionally, techniques for multi-compounds analysis using HPLC and LC-MS/MS and non-destructive analysis techniques using FT-IR were comprehensively described.

• Journal of Life Science
• /
• v.33 no.10
• /
• pp.842-850
• /
• 2023

Pyrrolnitrin, pyrrolomycin, and pyoluteorin are functional halogenated phenylpyrrole derivatives (HPDs) derived from microorganisms with diverse antimicrobial activities. Pyrrolnitrin is a secondary metabolite produced from L-tryptophan through four-step reactions in Pseudomonas fluorescens, Burkholderia cepacia, Serratia plymuthica, etc. It is currently used for the treatment of superficial dermatophytic fungal infections, has high antagonistic activities against soil-borne and foliar fungal infections, and has many industrial applications. Since pyrrolnitrin is easily decomposed by light, it is difficult to widely use it outdoors. As an alternative, fludioxonil, a synthetically produced non-systemic surface fungicide that is structurally similar and has excellent light stability, has been commercialized for seed and foliar treatment of plants. However, due to its high toxicity to aquatic organisms and adverse effects in human cell lines, many countries have established maximum residue levels and strictly control its levels. Pyrrolomycin and pyoluteorin, which have antibiotic/antibiofilm activity against Gram-positive bacteria and high anti-oomycete activity against the plant pathogen Pythium ultimum, respectively, were isolated and identified from microorganisms. This review summarizes the biosynthesis and production of natural pyrrolnitrin derived from bacteria and the characteristics of synthetic fludioxonil and other natural phenylpyrrole derivatives among the HPDs. We expect that a plethora of highly effective, novel HPDs that are safe for humans and environments will be developed through the generation of an HPD library by microbial biosynthesis and chemical synthesis.

• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.1
• /
• pp.211-253
• /
• 2005

Recently, the Korean Supreme Court released two important decisions concerning damages for the pain and suffering from Aircraft noise. The local people who are living near the Air Force practice site at Maehyang-ri and the Kimpo International Airport brought lawsuits against the Korean government requesting damages for their financial loss from the severe noise and the damages for their pain and suffering. Plaintiffs alleged that they suffered physical malfunctions, extreme disturbances and the reduction of property values from the extreme noises which were daily repeated. District Court of Seoul Province did not allow plaintiffs all but the damages for pain and suffering. Plaintiffs could not prove the causation between their financial loss and the noise. The Supreme Court confirmed the lower court's decision. Article V of the National Compensation Act (analogous to the Federal Tort Claims Act of the USA) reads, "the government shall be liable for any loss caused by the defect on establishment or maintenance of public facilities." In the two cases, the major issue was whether the government's establishment or maintenance of Air Force practice site and the airport was defective because they caused serious noise to surrounding neighbors. Previously, the Supreme Court interpreted the clause "defect on establishment or maintenance of public facilities" as failure of duty to provide safety measures to the degree generally required to ordinary manager. However the Court at this time interpreted differently that the defect could be found if the facility caused to any person loss to the degree intolerable. In the two cases the Court confirmed the lower court's finding that noise level at the site was severe enough to be intolerable. This standard is based on the severity of the loss rather than the failure of duty. It became easier for plaintiffs to prove the cause of action under this interpretation. The consequence of the ruling of these two cases is 'rush to the courtroom' by the local people at similar situations. The ruling of these two cases was not appropriate both in theory and in consequence. The Korean tort system is basically based on the theory of negligence. Strict liability is exceptional only when there is special legislation. The Court created strict liability rule by interpreting the Art. V of the National Compensation Act. This is against the proper role of the court. The result of the cases is also dismal. The government was already sued by a number of local people for damages. Especially the Department of Defense which is operating many airports nationwide has financial hardship, which will cause downsizing military practice by the Air Force in the long run, This is no good to anyone. Tens of millions of dollars which might be used for compensation might be better used to prevent further noise problem surrounding airports.