• Proceedings of the Korean Statistical Society Conference
• /
• 2003.05a
• /
• pp.249-254
• /
• 2003

붓스트랩 기법에 의한 k 인자 허용구간방법을 95/95 확률 및 신뢰도를 갖는 허용구간에 활용하기 위하여 모의실험을 수행하였다. 그 결과 소표본 및 적당한 크기의 표본에서 추정된 신뢰도값은 실제 신뢰도값 95와 약 6${\sim}$21% 정도의 차이를 나타냈고, 이 차이는 표본크기가 커질수록 점점 줄어들었다. 더불어 기존방법에 보간법 등을 가미한 방법들을 제안하여 이들에 의한 결과를 기존결과와 비교하였다.

• Journal of Korean Society of Transportation
• /
• v.16 no.2
• /
• pp.67-76
• /
• 1998

본 연구는 현행 오르막차로 설계기준이 적정한지를 검증하고 오르막차로 설계기준 제시에 목적을 두고 있다. 오르막차로와 본선에 대한 현장의 속도분포와 화물차량의 합류형태를 바탕으로 오르막차로 설계기준을 검증하고 개발하였으며, 주요 연구결과를 요약하면 다음과 같다. 첫째, 설계속도 120km/h에서 화물차의 50백분위비율과 85백분율은 각각 66km/h와 76km/h로 나타났기 때문에 현행 설계속도 80km/h 이상의 구간에서 화물차의 허용최저속도를 60km/h로 규정하고 있는 것을 설계속도 기준을 세분화하여 설계속도가 100km/h 이상인 구간에서는 화물차의 허용최저 속도를 70km/h로 함이 타당한 것으로 도출되었다. 둘째, 설계속도 80km/h인 구간에서의 화물차 허용최저속도는 60km/h로 규정한 것이 적정하다고 확인되었다. 셋째, 설계속도 80km/h 미만의 구간에서 화물차의 허용최저속도는 설계속도에서 20km/h를 감한값을 사용하는데, 이 때 20km/h 감속을 한계속도 기준으로 사용하는 것이 적정하다고 확인되었다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.427-430
• /
• 1998

본 논문은 고속철도 역사의 통과구간 설계에 있어서 소음방지에 효과적인 설계안을 검토하기 위하여 7가지의 다양한 대안의 모델을 시뮬레이션하여 그 결과를 비교 분석하였다. 고속열차의 최대 운영속도 300 km/h 기준시 승강장의 허용소음도는 약 91 dB(A) 일 때 이를 만족하는 설계안은 통과구간의 양쪽에 설치하는 방음벽으로는 부족하며 통과구간을 곡면유리로 폐쇄한 터널식의 설계가 허용소음도를 만족하는 것으로 나타났다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.479-480
• /
• 2011

관로내 케이블 포설시 케이블 허용장력이 포설장력을 초과하지 않도록 주의해야 한다. 또한, 케이블 포설 도중 Kink가 발생하지 않도록 케이블 드럼을 반드시 세워서 포설해야 하고, 케이블 드럼을 눕혀서 포설해서는 안 된다. 또한, 허용전류를 고려하여 케이블 상호간의 간격을 일정하게 유지해야 한다. 관로 내 케이블을 설치할 경우 직선구간 뿐 아니라 굴곡구간에도 설치되므로 포설측압이 허용측압을 초과하지 않도록 시설해야 한다. 측압에 견디기 위해서는 케이블 포설시 곡률 반경을 케이블 외경의 10배 이상으로 유지하는 것이 중요하다.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.597-606
• /
• 2015

Until now, u-turn lane installation methods have been studied variously. But, There is no specific standard yet. This study ranges are commercial area in Incheon metropolitan city through field investigation and presents specific design standard for efficient operation of left turn using a field data through calculating relevant permitted u-turn lane length and minimum separation distance from the front intersection to starting point of permitted u-turn lane in urban signalized intersections in commercial area. Relevant permitted u-turn lane length is found to be 32m and minimum separation distances from the front intersection to starting point of permitted u-turn lanes are 72m, 40m, 24m in case of 1 left turn lane, 2 left turn lanes and 3 left turn lanes respectively. By comparing result values and field data, they had a large difference under the similar situations in their lengths. This result is caused of no specific standard about design of u-turn lanes. If results of this study applied to design of u-turn lanes, signalized intersections in urban commercial areas would be operated more safety and efficiently.

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.583-596
• /
• 2012

The revetment is a installed structure on the slope of river bank to protect against flowing. Through the design standards of domestic and overseas, the maximum tractive force is calculated and applied to the average concept on the slope of river bank. In the case of calculating the method of permissible tractive force on the slope of river bank, there is a need to consider soil sliding. In this study, suggested the tractive force formulae by section of adhesion that have 0 < ${\Phi}$ < $90^{\circ}$ slope of river bank and installed an open channel of length of 20 m and 2 m wide for calculating permissible tractive force and hydraulic model experimented with changing discharge. According to the results, the calculated permissible tractive force of section on the slope is the largest due to the significant effects of surface roughness of different revetment materials. In addition, the permissible tractive force increased in the presence of vegetation but has no the effect by vegetation density.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1983.07a
• /
• pp.33-44
• /
• 1983

주요하천인 낙동강, 금강, 영산강, 섬진강 및 만경강의 5대강 유역에 대한 본 조사 연구의 주요목적은 하천의 유역특성과 수질상태 하천의 자정능력평가와 DO 모형의 설정, 하천의 유량규모와 오염부하량별 수질변화의 추정 및 하천구간별 허용유출 오염부하량별 수질변화의 추정 및 하천구간별 허용유출 오염부하량이 제시등이다. 본 조사는 전국 주요하천 기초조사의 제2차년도에 대한 것이며, 조사연구기간은 1982년 7월 1일부터 동년 12월 20일까지로 이 기간 동안에 실시된 조사연구의 중요성과는 다음과 같다.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.203-213
• /
• 2008

U-Turn offers convenience to drivers. U-Turn increases efficiency of traffic flow. But Standard of U-Turn is not clear. It caused many problems of traffic flow and traffic safety. This study estimate length between U-Turn location with front intersection based on stopping sight distance and left-turn vehicle's queue length. Variables are used traffic volume and operation speed. This study Analysis of U-Turn vehicle's behaviors and classification of conflict form by investigation. U-Turn length estimating based on relationship analysis between conflict with U-Turn length. Variables are used lane changing angles and operation speed. This study estimates length between U-Turn location with back intersection based on gap acceptance theory. Variables are used traffic volume, operation speed and lane changing angles. So, U-Turn location and length estimated considering traffic flow and traffic safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.33-44
• /
• 2007

Prohibition of lane changes in bridges and tunnels have been many problems in throughputs of expressways caused by heavy vehicles and slow-moving traffics. Nevertheless, those are constructed actively by the general trends, which are preservation of environment and ecosystem are more important, because mountainous districts are about 70% across the whole extent of Korea. In this paper, the proper design standards for permission of lane changes in bridges and tunnels classified into structure, safe, and driver's conveniences are suggested as follows. 1. Right shoulder should have more than 2.5m in bridges and tunnels. 2. Sufficient equipments of guidance like as directional signs, fingerposts, variable message signs, and markings should be established to smooth and safe lane changes of drivers. 3. Snow melting systems should be established in bridges worried about freezing. 4. Tunnels must be not only satisfied standards for prevention of disasters (2004.11) and lighting rules (KSA 3703), but also established anti-freezing facilities in entrance and exit. 5. The drivers should have honed on their car lights.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.23-36
• /
• 2016

We propose a new type of OFDM-CDMA scheme which allows large inter-user timing offset using zero correlation zone(ZCZ) code in conjunction with block spreading technique. Moreover to maximize spectral efficiency, the proposed OFDMA does not have guard time(GT). This is opposite to the trends in the conventional schemes where GT are supposed to be larger to allow larger inter-user timing offset. It is remarkable that the proposed GT-free OFDM-CDMA scheme completely cancels inter-user interference in the multipath fading simply by despreading process. This inter-user interference-free feature still remains even there exist inter-user timing offsets as large as multiple OFDM symbols. Although the self-user interference exists due to no GT, it can be effectively suppressed by simple successive interference cancellation(SIC) from the first symbol in spread block as it is free from inter symbol interference(ISI).