• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.116.1-116.1
• /
• 2015

원자력 발전소 고리 1호기의 해체가 결정됨에 따라 발전소를 구성한 금속기기의 제염처리가 대두되고 있다. 금속 방사성폐기물 중 상당수는 그 자체가 방사성 오염 물질이라기보다는 오염 핵종이 표면에 부착하고 있는 경우가 많아 제염 공정을 거쳐 폐기한다면 보관해야 하는 양을 획기적으로 줄일 수 있을 것이다. 이에 따라 본 연구실에서는 플라즈마트론을 이용한 방사성 폐기물 건식제염처리에 대하여 연구하였다. 본 실험에서는 방사성을 띄지 않는 동위원소 Co sheet와 DC 플라즈마트론을 사용하였다. Ar 1000 sccm을 고정으로 비율(10:0, 9:1, 8:2, 7:3, 6:4), 거리(20 mm, 30 mm 40 mm), 시간(60 sec, 120 sec, 180 sec)을 변수로 두어 실험하였다. 결과적으로 기체의 혼합비가 4:1일 때 최대 식각율 $9.24{\mu}m/min$을 확인했다.

• 한국해양학회지
• /
• v.27 no.2
• /
• pp.101-111
• /
• 1992

용존 철의 행동과 시간적 변화에 대한 연구가 온대 대조차 환경인 금강 하구에서 이루어 졌다. 이지역에서 가장 중요한 환경변수인 하천배수량과 조차의 차이로 야기되 는 변화를 파악할 수 있도록 4번의 현장조사를 각각 다른 배수량과 조차의 시기에 실 시하였으며, 아울러 실험실 내에서 혼합실험도 행해졌다. 혼합실험의 결과 하천에 의 해 운반되는 용존 철의 90% 이상이 5$\textperthousand$ 이하의 저염분역에서 제거되는 현상이 확인되 었다. 그러나 현장조사에서 이러한 초기 혼합시의 용존 철 제거가 뚜렷이 나타난 것은 갈수기.소조기 3번의 다른 환경조건 하에서는 용존 철 농도의 심한 변화가 관측되었 다. 하천배수량과 조차의 변화에 따라 보여진 용존 철의 변화는 하구순환이나 퇴적물 재부유 및 응집체 해체 등의 물리적 현상과 관련시켜 해석되었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.116.1-116.1
• /
• 2013

포항가속기연구소 저장링에는 Dipole Magnet, Wiggler, Undulator 등 다양한 방사광발생장치를 설치하여 각종 실험에 사용하고 있다. 그중 ADC사에서 제작한 In- vacuum Undulator (이하, ADC-IVU)는 고휘도의 X-선 빔을 생성하여 생체고분자(단백질, DNA 등) 단결정의 X-선 회절 데이터를 획득하는 실험을 수행한다. 현재, ADC-IVU의 Rf finger 등 일부장치의 성능개선을 위한 장치 해체, 교체 작업과 재조립 및 정렬작업, 구동시험을 거치고 최종 초고진공 진공 달성을 위한 탈가스처리, NEG 활성화작업등을 마무리 하였다. 본 발표에서는 ADC-IVU의 성능개선 작업에 대한 전반적인 사항과 진공작업 및 그 결과를 내용으로 한다.

• Explosives and Blasting
• /
• v.27 no.2
• /
• pp.26-32
• /
• 2009

Although the number of blasting operations in urban area are growing, lesser attentions have been paid to the effects of impact load on nearby concrete structures. In this study, the properties of concrete were obtained by both the sonic velocity and Schmidt rebound tests, and the degree of damage in concrete material was evaluated by measuring the sonic velocity in sample before and after applying the impact load. The test results shows that the sonic velocity decreases with the increase of intensity of impact load, and the degree of damage in concrete samples is lower when the samples have higher strength and sonic velocity.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.907-914
• /
• 2015

Due to the global warming, the restriction for emitting the green-house gas is strengthened and a main ingredient of the green-house gas is carbon dioxide ($CO_2$). In order to reduce the amount of $CO_2$, the low-carbon and long-life of the construction and the construction materials management system based on the radio frequency identification (RFID) technique have been actively studied in the construction field. The conventional construction management system based on RFID only focuses on the study and experiment for managing the used amount and location of the construction materials in the construction stage, but it does not consider the study for the status management system for the recycling materials in the construction stage or the building deactivation. In this paper, we propose the effective RFID system for managing the status of the construction materials during the construction stage or the building deactivation. Employing RFID with the frequency of 900MHz, the proposed system consists of the reader unit, communication unit, and memory unit, and its tags are attached in the surface or inside of the construction materials.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.117-126
• /
• 2003

A semiotic approach to modern visual arts has emerged since French post-structuralism was introduced to Anglo -American academics by "deconstruction" or "postmodernism." It views a work of art as a sign, which is its methodical assumption ana at the same time makes its application more accessible In the milieu of modern visual arts'effort to be intimate to with general audience, modern art photography is now faced with the request to be a familar and universal domain instead of being left only in photo books as artistic and academic achievements More specifically, various photo images 1mm such visual media as newspapers TVs, and computer graphics to such megaexhibitions as "Gwangju Biennale," "Media City Seoul," and "Pusan International Art Festival," are main objects of s030y. A coherent and scientific analysis of visual semitotics is still on the way; however, it is an urgent task how to read and interpret a photo image with multiple meanings This study argues that visual semiotics can be a powerful tool to enhance the understanding of art photography. After all, semiotics is a product of age; we live in the age of legibility, that is, of reading the work of art well as the social events and phenomena.rk of art well as the social events and phenomena.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.381-388
• /
• 2007

The regular RC structures have been transformed into irregular RC structures by alternate load of RC structures during explosive demolition. Numerical simulation programs have contributed to a better understanding of large displacement collapse behavior during explosive demolition, but there remain a number of problems which need to be solved. In this study, the 1/5 scaled 1, 3 and 5 stories RC structures were designed and fabricated. To consider the collapse possibility of upper dead load, fabricated RC structures were demolished by means of felling method. To observe the collapse behavior of the RC structures during felling, displacement of X-direction (or horizontal), displacement of Z-direction (or vertical) md relative displacement angle from respective RC structures were analyzed. Finally explosive demolition on the scaled RC structures using felling method are carried out, collapse behavior by felling method is affected by upper dead load of scaled RC structures. Displacement of X and Z direction increases gradually to respective 67ms and 300ms after blasting. It is confirmed that initial collapse velocity due to alternate load has a higher 3 stories RC structures than 5 stories.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.136-136
• /
• 2017

화학제염 기술은 산화제, 환원제, 금속이온, 무기산등이 혼합되어 있는 화학용액을 사용하여 원전기기 계통 내부에 생성된 고방사능 준위의 산화막과 오염물질을 제거하는 기술이다. 원전의 해체 및 유지보수에 있어 방사능 피복저감을 위한 필수적인 기술이다. 현재 원전 해체 산업은 잠재성이 높은 고부가가치 창출 산업으로 주목을 받고 있다. 원전 보유국의 경우, 기존 상용 제염기술과는 차별성 있는 제염기술을 확보하고자 노력하고 있다. 기존의 공정과 비교하여 공정비용 및 시간을 감소시킬 수 있어야 할 뿐만 아니라, 화학용액에 의한 원전 계통 금속 부품의 부식 및 손상을 최소화해야 한다. 금속 부품이 화학약품에 의한 부식손상을 받는다면 금속 부품의 수명 및 재활용 가치가 감소하기 때문에, 화학제염 기술 적용에 있어 용액에 대한 재료의 건전성 평가가 사전에 필히 이루어져야 한다. 본 연구에서는 원전 냉각재 펌프용 재료로 주로 사용되는 Stainless 304강을 시험편으로 선정하여, 화학제염 시험공정 3가지에 대한 부식손상 특성을 규명하였다. 산화공정은 과망간산($HMnO_4$) 용액을 공통으로 사용하였으며, 산화공정 종료 후 환원공정은 각 시험공정에 따라 시험공정 1은 옥살산($H_2C_2O_4$) 2000ppm, 시험공정 2는 옥살산($H_2C_2O_4$)1500ppm + 시트르산($H_8C_6O_7$)500ppm, 그리고 시험공정 3은 옥살산($H_2C_2O_4$) 3000ppm 용액을 각각 투입하여 수행하였다. 산화, 환원공정을 1Cycle로 하여, 각 시험공정 별로 총 5Cycle을 실시하였다. 각 시험공정 Cycle종료 후 시험편을 취외하여 무게감량측정, SEM(Scanning electron microscope) 분석, 3D현미경분석 그리고 타펠분극 실험을 실시하였다. 각 분석결과를 토대로 하여, Stainless 304강에 대한 화학제염 시 모델별 시험공정에 따른 부식특성을 규명하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.221-229
• /
• 2011

A core zone of a fill dam is an important part of a dam for cutoff of water. Therefore, the material properties and behavior characteristics of a core zone are very important factors in an analysis of dam stability. However, the investigation on material properties of actual dam core is extremely rare so far. The material properties have been acquired or estimated by indirect methods like a surface wave surveying or empirical equation. In this research, in-situ and laboratory tests were conducted during dismantling an existing dam directly to investigate characteristics of the core zone in terms of the depth and transient variation of properties after construction of the dam. Dynamic material properties like shear wave velocity and shear modulus were measured and compared to other existing empirical correlations. In addition, aging characteristics of dynamic material properties were investigated by a series of laboratory tests.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.17-23
• /
• 2005

In Korea, the production of reclaimed concrete materials has been increased due to the increase in the concrete structures taken down every year. The reclaimed concrete materials have been reused as road materials. However, the studies on their mechanical and environmental properties have been very limited. The recycled rate of the materials is currently low in Korea. This paper presents the investigation of mechanical and environmental properties of the reclaimed concrete materials, as well as the comparisons with those of gravel. For the evaluation of the mechanical and environmental characteristics, following tests were conducted on both reclamed materials and gravel; liquid limit, plasticity index, CBR, sand equivalent test, abrasion test, pH test, and column leaching test. The test results showed that the reclaimed concretes satisfy the requirements for use as roadbase, subbase, and subgrade materials, except base materials. The pH of reclaimed concrete materials was less than 11 and the leaching test results satisfied the regulatory requirement of Waste Management Act in Korea. Based on the investigations, it appears that the reclaimed concrete materials are environmentally safe and applicable for use as road materials.