• Title/Summary/Keyword: 해외 이동

Search Result 252, Processing Time 0.024 seconds

A Exploratory Study on an Introduction of a Walking Safety Measure for Walking Right - Centering around Walking Safety Measures of Advanced Countries - (보행권 확보를 위한 보행안전대책의 도입방안에 관한 기초적 연구 - 선진국 보행안전대책을 중심으로 -)

  • Jang, Seok Yong;Jung, Hun Young;Woo, Seong Seok
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.30 no.1D
    • /
    • pp.17-25
    • /
    • 2010
  • In Korea, the importance of walking has not been stood out in relief because of the rapid increase of a car on a drastic economic growth in the past half a century. Walking has failed to be recognized as a traffic measure or one of basic human rights. Therefore this study brings up problems of weakened walking right from increase of cars and examines reinforcing policies for walking right of advanced countries. And this study presents institutional devices for introducing walking safety measures of advanced countries reflecting pedestrian satisfaction and opinions about walking right. The results of this study are, First, pedestrians' walking liberty is guaranteed, Second, how to repair walking environment is searched and practical measures are analyzed to find out what is applicable to Korea, can reduce pedestrian accidents and is wanted by pedestrians using GAP analysis and Structural Equation. Third, basic data for upcoming selection of policies are presented by analyzing pedestrian satisfaction assuming that selected measures are operated.

A Study on the Success Factors Related to the Performance of Power Plant Engineering Projects (발전플랜트 엔지니어링 프로젝트 성공요인 우선순위 도출 연구)

  • Suh, Jaeho;Lee, Dongmyung
    • Korean Journal of Construction Engineering and Management
    • /
    • v.25 no.2
    • /
    • pp.11-22
    • /
    • 2024
  • Power plant engineering industry obtains EPC plan project and delivers results about electricity, measurement, machinery, and piping and so on. Its works are taken by projects. Although power plant engineering composes 2~5% of whole EPC project cost, it's one of the fundamentals because it affects process after planning step a lot. However, domestic power plant engineering companies' project performance ability is insufficient and there's a need for systematic performance. Thus, this study defined related factors of successful performance and analyzed the priority among them through analytical hierarchy process. All respondents recognized experience, knowledge, and communication as important factors. Administrators considered knowledge, experience, and communication. But hands-on workers considered experience, knowledge, human resources. Those who have experience in oversea project considered process, experience, human resources. However those who don't have experience in oversea project considered knowledge, experience, and communication. Recognition of important factors varies by the position and work experience of members.

Technological Review for Location Based Services (위치기반 서비스를 위한 기술수요 조사)

  • Jin, Heui-Chae
    • Journal of Korea Spatial Information System Society
    • /
    • v.5 no.1 s.9
    • /
    • pp.13-25
    • /
    • 2003
  • The advent of LBS is caused by mobility advantage of wireless internet. The mobility has the information such as location which is based on LBS(Location based Services). It comes out as a killer application for wireless internet when market of wireless internet is diffused. In this paper, we build up the technical model and survey the requirement of technologies related LBS expanded as wireless internet services rapidly. First, we construct the conceptual model for LBS based on functions of LBS and characteristics of foreign models. This model is consisted of generalized components of LBS and can be used as a basic model to survey the requirement of each technologies. Second, we survey the demand of each technology for LBS. Then we analyze the importance of technologies for LBS to prepare developing various LBS. From this research, we can introduce proper plans and policy for LBS to develop technology stepwise, to promote industry activities and how to make up the foundation for LBS by government.

  • PDF

Performance Evaluation of Advanced Container Security Device(ACSD) system based on IoT(Internet of Things) (IoT 기반 컨테이너 보안 장치 및 시스템 성능 평가)

  • Moon, Young-Sik;Choi, Sung-Pill;Lee, Eun-Kyu;Kim, Jae-Joong;Choi, Hyung-Rim
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.9
    • /
    • pp.2183-2190
    • /
    • 2013
  • Container Security Device (ConTracer) which is suggested in this study is to monitor temperature, humidity, and impact inside of the container while the container is transported. ConTracer could also give information to users when a door of the container is opened over 2 inch within 1 second. Additionally, GPS/GLONASS based global position and status information about container are transmitted to a remote server using IoT (Internet of Things) based communication. In this research, we are looking into the development trend of global container security devices; and applying ConTracer to real freight transport from domestic to overseas using Global Roaming Service which is offered for domestic Mobile Communication Companies as well. As a result, we estimate the performance of ConTracer and verify it.

The Estimation of Debris Flow Behaviors in Injae Landslide Area (인제군 산사태 지역의 토석류 거동 예측기법 적용)

  • Kim, Gi-Hong;Hwang, Jae-Seon
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.29 no.5
    • /
    • pp.535-541
    • /
    • 2011
  • A debris flow is caused by torrential rain in mountainous regions and carries mixture of fragmental matter from slope failure, deposit soils from a valley floor and a large amount of water. It seriously damages facilities, houses, and human lives in its path. We tried to apply debris flow behavior estimation model developed in foreign country to domestic case. The study area is Inje-county, Gangwon-do and aerial photos and GPS surveying were used to collect information of starting and end point of the landslide and debris flow. The analysis showed that L/H for forecasting the travel distances of debris flows has the mean of 4.93 and standard deviation of 0.98. This model tended to overestimate the scale and extent of debris flows. In Inje-county's case, a debris flow is caused by multiple simultaneous small-scale landslide. This is quite different from the foreign cases in which a large-scale landslide cause a large-scale debris flow. Thus, an empirical model suitable for domestic conditions needs to be developed.

An Analysis on the Technical Regulation for A-SMGCS in Korea (국내용 지상이동 유도 및 통제시스템(A-SMGCS) 기술기준)

  • Choi, Seung-Hoon;Choi, Youn-Chul;Hong, Seung-Boem
    • Journal of Advanced Navigation Technology
    • /
    • v.20 no.1
    • /
    • pp.15-22
    • /
    • 2016
  • The A-SMGCS is a modular system defined in the ICAO manual on advanced surface movement guidance and control systems. Such systems aim to maintain the declared surface movement rate under all weather conditions while maintaining the required level of safety. In this paper, we find out the details and 14 modules'specific features that developing Level IV A-SMGCS in Korea. Also we figure out relation domestic regulations as SMGCS manual & visual aids manual in Korea and research foreign cases such as defined ICAO 9830 manual, EUROCONTROL's project 'EMMA2' document, and FAA advisory circular-150 manual. It will be used as analysis data that can be applied to the undefined A-SMGCS in Korea technical regulation.

A Study on the Permission Method of Personal Mobility Device (PMD) on Sidewalk (보도에서의 개인교통수단 통행 허용 방안에 대한 연구)

  • Kim, Youngmin;Kim, Jisoo;Moon, Byeongsup
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.17 no.5
    • /
    • pp.88-99
    • /
    • 2018
  • In Korea, there is no clear regulation about right of way (ROW) for personal mobility device (PMD). So it is now illegal to use PMD in a space other than roadway. PMD has an advantage of being able to travel a long distance to move on foot with a relatively high speed, so it seems to spread widely in the near future. In this study, we'd like to establish the permission criteria for PMD in sidewalk, with the performance factors of the PMD. We review the cases of ROW of PMD in some foreign countries, and the performance standards for similar products that are currently allowed to use in the sidewalk or used in the sidewalk. Based on the maintenance standards for the sidewalk, we establish criteria to select the PMD moving means that can be used in sidewalk.

Planning of Barrier Free Pedestrian Safety Devices (Barrier Free 보행안전시설 계획)

  • Nam, Doohee
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.13 no.2
    • /
    • pp.217-223
    • /
    • 2013
  • Population aging is a shift in the distribution of a country's population towards older ages. This is usually reflected in an increase in the population's mean and median ages, a decline in the proportion of the population composed of children, and a rise in the proportion of the population that is elderly. Population ageing is widespread across the world. Barrier-free or Design for All concept consists of modifying buildings or facilities so that they can be used by people who are disabled or have physical impairments. Design for All criteria are aimed at ensuring that everyone can participate in the Information society. Safety-related products being easy to adapt according to different needs, or using standardized interfaces that can be accessed simply by using assistive technology. To this end, policy makers and service providers, especially in the ubiquitous technologies, produce new technologies, products, services and applications for pedestrians.

A Spatial Study on the Network Formation Process of Personal Actors: The Case of Institutional Building Networks in Industries for the Elderly (개인 행위주체의 네트워크 형성 과정에 대한 공간적 고찰: 고령친화산업의 제도구축 네트워크를 사례로)

  • Koo, Yang-Mi
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.11 no.3
    • /
    • pp.334-349
    • /
    • 2008
  • In this study, the network formation process of personal actors in industries for the elderly was analyzed. This process is applied to the knowledge creation model of the SECI (Nonaka-Takeuchi learning cycle), that is socialization, externalization, combination, internalization. There are some kinds of opportunities to interact in these industries in the forms of field survey teams to overseas, some seminars and symposiums, many kinds of meetings, education and training programs, trade fairs and on-line forums. These palces(ba) - originating ba, interacting ba, cyber ba, exercising ba - played great roles in the formation of personal actor networks. Personal actors had opportunities to interconnect with distant actors through those places(ba). In the spatial perspective, personal actors could make face-to-face contact and build trust through temporary geographical proximity or temporary clusters with the help of personal mobility. Relations in the virtual spaces such as the Internet community did much toward building personal networks.

  • PDF

The Research of Design Development for Strengthening Competitiveness of Domestic Medical Instrument Industry -Focused on C-Arm Surgical X-Ray Design- (국내 의료기기산업 경쟁력 강화를 위한 디자인개발에 관한 연구 -이동형 영상진단기기 디자인을 중심으로-)

  • Han, Il-Woo
    • Archives of design research
    • /
    • v.17 no.4
    • /
    • pp.51-60
    • /
    • 2004
  • The medical instrument industry which is one of the high value added industry has been neglected on the various system and political support because it has been recognized as an unknown field to the public although it is the very easy-approaching field for the export market that minimize a technological gap between advanced country and Korea. Especially, the product design that is very important element for the efficient medical treatment and the psychological stabilization of patient is a typical field of lack of investment and support by the unconcern and lack of understanding of design. Therefore this research suggests the current problem of design with the general inquiry of internal and external market situation and domestic medical instrument industry and also it has the conclusion of an alternative proposal for the solution with the design development processing of a moving type-image diagnostic equipment. We will emboss the importance of design competitiveness, suggest the model and basic data to the medical instrument company that starts later, and be a role of inspiration for the lasting investible desire with this research.

  • PDF