• 대한조선학회지
• /
• 제55권4호
• /
• pp.48-54
• /
• 2018

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 추계학술대회
• /
• pp.119-121
• /
• 2013

최근 대규모 선박 및 해양플랜트 사고 발생을 계기로 각국의 정부와 관련 업계에서는 안전사고 예방을 위한 규제를 강화하고 기업차원의 안전관리도 철저히 점검하고 있다. 선박사고의 경우에는 1989년 "엑슨발데스호" 사고를 계기로 국제해사기구(IMO) 주도하에 유조선의 "2중 선체 의무화"를 추진했으며, 2012년에는 전 세계적으로 공식 시행되고 있다. 해양플랜트 사고의 경우에는 1988년 북해(North Sea)에서 발생한 Piper Alpha 폭발사고를 계기로 인적요인에 대한 관심이 높아졌으며, 2010년 멕시코만에서 발생한 "딥워터호라이즌호" 사고 이후 시추작업에 대한 안전점검과 인적오류 예방 및 관리를 위한 훈련을 강화하고 있다(배영일, 2012). 일반적으로 해양플랜트 사고의 원인은 구조물 자체의 오류가 20%이하이며, 예기치 못한 작업자의 행동으로 발생된 사고가 80% 이상을 차지하고 있다. 즉, 대부분의 사고는 operation 또는 maintenance 동안 발생하는 것으로 나타나고 있다. 본 발표에서는 해양플랜트 산업에서의 사고와 관련된 최근 연구현황 및 향후 연구 방향을 소개하고자 한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 추계학술대회
• /
• pp.274-276
• /
• 2012

세계적으로 해양플랜트시장 선점경쟁이 격화되고 있는 가운데, 중국이 해양플랜트 대국달성을 목표로 산업육성에 적극 나서고 있다. 특히 2010년 국가 전략적 신산업의 하나(첨단 제조업에 포함)로 선정하고 이를 바탕으로 '2020 산업혁신 전략', '2020 산업중장기 발전계획'을 마련하여 적극 추진하고 있다. 즉 2020년 국제시장 점유율 35% 이상, 기자재국산화율 50% 이상이라는 세부 목표를 세우고 이를 위한 재정 금융 세제 지원 강화, 기술개발 확대, 산업클러스터 구축 등을 본격화하고 있어 우리나라와의 경쟁심화가 불가피하다. 따라서 본 원고에서는 이러한 중국의 해양플랜트산업 육성정책과 산업동향을 분석하고 시사점을 도출하고자 하였다.

• 기계저널
• /
• 제54권11호
• /
• pp.37-41
• /
• 2014

이 글에서는 점차 심해, 극지 등 극한해양환경에 설치되는 원유 생산 해양플랜트와 관련 기자재의 요구 기술과 국 내외 정책 동향에 대해 소개한다.

• 스마트미디어저널
• /
• 제1권1호
• /
• pp.48-52
• /
• 2012

해양플랜트에 대한 설계 엔지니어링 기술을 확보하는데 있어 신뢰성 있는 평가 수행이 중요한 위치를 차지하고 있다. 국내 해양플랜트 공정설계 및 기본설계기술의 자립화를 위해서는 신뢰성 평가 기반의 설계검증 기술개발이 필요하고, 이를 위해 신뢰성 있는 실증실험 데이터 확보가 중요한 요소이다. 따라서, 신뢰성 있는 데이터를 확보하기 위해서는 해양플랜트 환경모사 실증시험 시스템이 구축되어야 한다. 본 연구에서는 해양플랜트 공정모듈 환경모사 시스템 구성을 위한 환경제어 및 측정변수 분석과 도출된 변수를 기반으로 데이터 수집장치 및 제어시스템의 설계 계획안을 연구한다.

• 대한금속재료학회지
• /
• 제50권6호
• /
• pp.427-432
• /
• 2012

This paper presents the material properties of carbon steels for ships, and offshore structures (ASTM A131) are tested under a series of arctic and cryogenic temperature conditions. For material tension tests, among the ASTM 131 steels, Grades A and B of mild steel and Grade AH of high tensile steel have been used. The obtained mechanical properties of the materials from the material tension tests were applied in a 13,000TEU class container ship to define the effect of low temperature on the ultimate longitudinal strength of the target structure by using the ALPS/HULL intelligent supersize finite element method. The tensile coupon test results showed increased strength and nonuniform fracture strain behaviors within different grades and temperatures. Increasing the material strength resulted in increasing the ultimate longitudinal strength of the ship.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.827-839
• /
• 2021

Due to climate change and population growth, water scarcity is getting worse all over the world. Among various methods for desalination of seawater, the Multi-Effect Adsorptive Desalination method, which combines the existing Multi-Effect Desalination method and the Adsorptive Desalination method and can produce high-concentration-high-concentration freshwater, is emerging. Because the Multi-Effect Adsorptive Desalination method combines the two different methods, the system becomes complicated and the possibility of failure increases. Therefore, in this study, availability analysis was performed on the Multi-Effect Adsorptive Desalination process. A total of four types of reliability block diagrams were presented, and availability analysis was conducted based on them. The first form of a reliability block diagram is configured in series without any redundancy. The availability of the reliability block diagram composed of the serial system was found to be lower than the required availability. In order to increase availability, the redundancy to pumps and boiler are added to system. As a result of availability analysis, it was confirmed that designing desalination systems with redundancy to pump meets the 93% availability, which is typically required availability for various plants.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.843-851
• /
• 2022

This paper was conducted to study the conditions for the manufacture and operation of artificial snow removal and ice-making test facilities so that the test equipment can be tested in a low-temperature environment using the polar environment performance test facility. The polar environment performance test Facility is designed to artificially simulate extreme environments up to -65 ℃, and is a mid-to-large low-temperature environment test facility that can perform performance tests on offshore plant equipment, ships, leisure, and offshore structures. To verify the safety of deck work of ships operating in polar environments, artificial snow removal and artificial ice making devices were manufactured, and we conducted research on various operating environments using these facilities. For the efficient operation of artificial snow and ice making facilities, it is important to continuously supply dry air, and it has been found that installing an additional heater at the tip of the nozzle is effective in preventing freezing.

• 대한조선학회논문집
• /
• 제59권4호
• /
• pp.214-224
• /
• 2022

It is necessary to estimate manoeuvring characteristics of submerged bodies at the design stage in order to ensure the safe operations. In this study, added mass coefficients in the mathematical model of submerged bodies are estimated by captive model tests and numerical calculations. Two kinds of models, MARIN 'BB2'submarine model and AUV (Autonomous unmanned vehicle) model are utilized in the forced oscillation tests. Compared to BB2 submarine, AUV with cylindrical type hull form shows relatively small added masses in roll, pitch, and yaw directions. Next, numerical calculations based on potential theory are performed under the assumption that viscous effects on inertia forces are negligible. Added masses obtained by numerical calculations are in good agreements with forced oscillation test results. And if slow manoeuvres of submerged bodies are presumed, some of velocity coupled terms can be approximated by combinations of added mass coefficients.

• 대한조선학회논문집
• /
• 제59권6호
• /
• pp.423-431
• /
• 2022

In this paper, the results of Planar Motion Mechanism (PMM) test for a 1/15 scaled model of the MARIN Joubert BB2 submarine is dealt with to derive the maneuvering coefficients for surface condition. For the depth of surface navigation, the top of the sail was exposed 0.46 m above the water surface in the model scale, and it corresponds to 6.9 m in the full scale. The resistance and self-propulsion tests were conducted, and the model's self-propulsion point was obtained for 1.328 m/s, which corresponded to 10 knots in the full scale. The maneuvering tests were performed at the model's self-propulsion point, and the maneuvering coefficients were obtained. Based on the maneuvering coefficients, a turning simulation was performed for starboard 30 degree of stern fins. The straight-line stability and control effectiveness in the horizontal plane were analyzed using the maneuvering coefficients and compared with the appropriate range. For the analysis of the neutral fin angle of the X-type stern fin, the stern fin test with drift angles was carried out. As a result, the flow straightening effect at lower and upper parts of the stern fin was discussed.