• Journal of Life Science
• /
• v.32 no.10
• /
• pp.778-783
• /
• 2022

This study isolated a new agarase-producing bacterium and characterized its agarase. A new agar-degrading strain was isolated from the seashore of Namhae in Gyeongnam province, Korea, and was purely cultured using the Marine Agar 2216 media. The isolated bacterium was identified as Simiduia sp. SH-2 after 16S rRNA gene sequencing. The crude agarase was obtained from the culture medium of the Simiduia sp. SH-2 strain, and the agar-degrading activity was measured. The highest level of activity of the Simiduia sp. SH-2-derived agar-degrading enzyme was 625 U/l. Agar degradation activity was most significant at 40℃ and pH 7.0. Compared to the activity at 40℃, the relative activity was 31% at 20℃ and 71% at 30℃. Compared to the activity at pH 7.0, the relative activity was 94% and 89% at pH 6.0 and pH 8.0, respectively. Residual activity was greater than 96% after exposure to 20℃ and 30℃ for 2 hr and more than 49% after exposure to 40℃ for 2 hr. Simiduia sp. SH-2 was identified as a strain producing β-agarase that creates neoagarooligosaccharides, such as neoagarotetraose and neoagarohexaose. Therefore, the Simiduia sp. SH-2 strain and its β-agarase are expected to be useful functional material producers in the food, cosmetic, and pharmaceutical industries.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.763-773
• /
• 2022

Industrial and environmental facilities, which are national growth engine, must sustain their structural safety and maintain their process to continue production activities under various load conditions including natural hazards. In this study, by improving existing design codes which aim to secure the structural safety only, new structural and seismic design codes are proposed to secure both the structural safety and the operability of facilities. In the proposed structural design code, a variety of loads to reflect the characteristics of industrial and environmental facilities are considered and load combinations for the ultimate strength design and the allowable stress design of structures are suggested. Considering the importance of a unit industrial facility and that of a unit process, the seismic design class, design earthquake, and seismic performance level of a unit component are determined to achieve the dual seismic performance objectives for securing both the structural safety and the operability. Also, the proposed design code are applied to an example of an environmental facility in order to examine its applicability.

• Resources Recycling
• /
• v.31 no.1
• /
• pp.37-45
• /
• 2022

The development of the electrical, electronic, and telecommunication industries has increased the share of electricity in total energy consumption. With the enforcement of the Act on the Promotion of the Development, Use, and Diffusion of New and Renewable Energy in 2021, the mandatory supply ratio of new and renewable energy is expected to expand, and the amount of waste cables generated in the stage of replacing and discarding cables used in the industry is also expected to increase. The purpose of this study was to quantify the environmental burden of waste cable recycling through the life cycle assessment (LCA) method. The results showed that the higher the amount of glue contained in the waste cable, the greater was the amount of fine dust and greenhouse gases generated. In addition, by assigning weights to 10 environmental burden items, it was confirmed that the marine aquatic eco-toxicity potential (MAETP) and human toxicity potential (HTP) had the greatest environmental burden. The main causes were identified as heptane and ethanol, which were the glue contained in the waste cable and the cleaning solutions used to remove them. Therefore, it is necessary to refrain from using glue in the cable production process and reduce the environmental burden by reducing the use of waste cable cleaning solutions used in the recycling process or using alternative materials.

• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.209-227
• /
• 2023

The government continues to announce measures to revitalize smart construction technology based on BIM for productivity innovation in the construction industry. In the design phase, the goal is design automation and optimization by converging BIM Data and other advanced technologies. Accordingly, in the basic design of the Namhae Seomyeon-Yeosu Sindeok National Road Construction Project, a domestic undersea tunnel project, BIM-based design was carried out by developing tunnel design automation technology using 3D spatial information according to the tunnel design process. In order to derive the optimal alignment, more than 10,000 alignment cases were generated in 36hr using the generative design technique and a quantitative evaluation of the objective functions defined by the designer was performed. AI-based ground classification and 3D Geo Model were established to evaluate the economic feasibility and stability of the optimal alignment. AI-based ground classification has improved its precision by performing about 30 types of ground classification per borehole, and in the case of the 3D Geo Model, its utilization can be expected in that it can accumulate ground data added during construction. In the case of 3D blasting design, the optimal charge weight was derived in 5 minutes by reviewing all security objects on the project range on Dynamo, and the design result was visualized in 3D space for intuitive and convenient construction management so that it could be used directly during construction.

• Journal of Korean Port Research
• /
• v.11 no.1
• /
• pp.1-11
• /
• 1997

The conventional methods of container forecasting is done through regression methods based on GNP growth trends and by other forecasting methods proposed by several authors. However these efforts prove to be inadequate with visible weakness and a more reasonable approach need to be determined. The succeeding sections elaborate the methodology and approach adopted. The results are then compared through a case study involving the forecast figures derived by the Pusan Port Authority and the values obtained by MRCS model introduced in this paper.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4A
• /
• pp.565-571
• /
• 2008

Recently, the evaluation technique using NDT (Nondestructive Technique : NDT) is widely utilized because it makes little damage on RC (Reinforced Concrete : RC) structures. The techniques using electromagnetic properties (EM properties) are also attempted for the evaluation of the performance of concrete which is nonmetallic. For the economic manufacturing of concrete material, sea-sand is often used as aggregate, however, chloride ion in concrete has direct effects on steel corrosion and EM properties. In this study, OPC mortar specimens with 5 different chloride amount (0.0, 0.6, 1.2, 2.4, and $3.6kg/m^3$) and 3 different water-cement ratios (45%, 55%, and 65%) are prepared in order to investigate the EM properties corresponding to concrete properties. The EM properties of conductivity and dielectric constant are measured in the frequency range over 0.2~20 GHz. To facilitate the comparison of EM properties with chloride content, average values are taken respectively for the conductivity and dielectric constant measured over the 5~20 GHz frequency range. According to the results of this experiment, dielectric constant and conductivity are increased with lower W/C ratio and larger amount of chloride content.

• Analytical Science and Technology
• /
• v.22 no.5
• /
• pp.360-368
• /
• 2009

Tributyltin (TBT) use has been prohibited by the IMO (International Maritime Organization), as well as Korea, since 2003. This prohibition has affected a gradual reduction in TBT use in maritime environs (seawater, sediment, and biosamples) in several countries. In this study, Crassostrea gigas (oyster) and Tapes philippinarum (manila clam) were chosen and measured for butyltin compound concentrations to verify TBT pollution levels since its 2003 ban. Specimens were taken directly from farms for concentration measurement, where Crassostrea gigas and Tapes philippinarum are cultivated, as well as prevalent locations predicted to have been polluted. Concentrations of MBT, DBT, and TBT of Crassostrea gigas were measured to be N.D -N.D., N.D. -N.D., and N.D. -60.21 ng Sn $g^{-1}$ (wet wt), respectively. Regarding Tapes philippinarum, MBT, DBT, and TBT were N.D. -12.27 ng Sn $g^{-1}$ (wet wt), N.D. -45.95 ng Sn $g^{-1}$ (wet wt), and N.D.-7.30 ng Sn $g^{-1}$ (wet wt), respectively. For this research, a correlative study was conducted to determine butyltin compound concentration in Crassostrea gigas at the locations where measurements were made in 1994 to determine to what extent TBT pollution level decreased. A decrease in all 7 sites was observed. In 4 of the 7 samples, butyltin compounds were measured to be below the detection limit, while that of the Tapes philippinarum did not appear high compared to foreign research data.

• Journal of Internet of Things and Convergence
• /
• v.10 no.1
• /
• pp.39-45
• /
• 2024

Container volume is a very important factor in accurate evaluation of port performance, and accurate prediction of effective port development and operation strategies is essential. However, it is difficult to improve the accuracy of container volume prediction due to rapid changes in the marine industry. To solve this problem, it is necessary to analyze the impact on port performance using the Internet of Things (IoT) and apply it to improve the competitiveness and efficiency of Busan Port. Therefore, this study aims to develop a prediction model for predicting the future container volume of Busan Port, and through this, focuses on improving port productivity and making improved decision-making by port management agencies. In order to predict port container volume, this study introduced the Extreme Gradient Boosting (XGBoost) technique of a machine learning model. XGBoost stands out of its higher accuracy, faster learning and prediction than other algorithms, preventing overfitting, along with providing Feature Importance. Especially, XGBoost can be used directly for regression predictive modelling, which helps improve the accuracy of the volume prediction model presented in previous studies. Through this, this study can accurately and reliably predict container volume by the proposed method with a 4.3% MAPE (Mean absolute percentage error) value, highlighting its high forecasting accuracy. It is believed that the accuracy of Busan container volume can be increased through the methodology presented in this study.

• Journal of Korea Port Economic Association
• /
• v.39 no.2
• /
• pp.77-95
• /
• 2023

The regional infrastructure industries of Gwangyang City, the subject of this study, are Gwangyang Port and Gwangyang Steel Mill. Therefore, it is necessary to analyze the regional economic ripple effects of the port logistics industry in Gwangyang City. In this study, a multi-stage approach using the RW and the LQ methodology using the national input-output tables in 2015 and 2019 is used to prepare the regional interindustry analysis chart in Gwangyang City, and an exogenous demand induction model that reclassified the port logistics industry was applied. Through this, the purpose of this study was to provide policy implications by figuring out the regional economic ripple effects of the port logistics industry quantitatively in Gwangyang City. As a result of the analysis, the industries with high production inducement effect and forward/backward linkage effect of the port logistics industry in Gwangyang City were analyzed as manufacturing, transportation, land and air logistics sectors. And the industries in which the added value inducement effect and the employment inducement effect were analyzed as an industry related to the service industry. Therefore, it is necessary to prepare support measures to foster the port logistics industry as a way to promote these industries and revitalize the local economy of Gwangyang City. To this end, it is desirable to improve policies and systems for the vitalization of the Gwangyang port maritime cluster and provide various policy support for the port logistics industry in Gwangyang City. This study is meaningful in suggesting policy implications for the regional economy of Gwangyang City based on the results of exogenous analysis of the port logistics industry in small and medium-sized cities. However, It seems that further studies related to this will be needed in the future.

• Science of Emotion and Sensibility
• /
• v.26 no.4
• /
• pp.71-92
• /
• 2023

This study investigates the symbolism and meaning of the bead design, its relationship with the Silla culture, and the conditions of glass bead manufacturing to verify the theory of Silla's production of Silla face-inlaid glass beads with excellent artistry and technology. The research method includes investigating the design analysis, ancient documents, myths, relics, glass, and metal production techniques. Moreover, Hongshan cultural relics and other cases of inlaid glass beads were collected. There are records in the literature that the people of Makhan, Buyeo and Silla of ancient Korea people considered beads as treasures and used them for accessories. It was confirmed that all the design elements of the bead-patterned hair topknot, golden crown, birds, and flower trees were closely related to the myth of Kim Al-ji of Silla, the oviparous tales and the sacred birds and divine beasts of the north. Moreover, the pattern and arrangements were found to be similar in other Silla relics. The origin of beads and face pendants was Hongsan culture, and a stone cast for beads was discovered in Bukpyo of Gojoseon, the lower-level culture of Hajiajeom. In addition, excavating inlaid glass beads from Sik-ri tombs of Korea and a face-inlaid glass bead from Toganmori tombs in Japan confirms the theory of Silla's production. The fact that the Baekje people of ancient Korea had a glass bead manufacturing office in Japan in the fifth centuries suggests that the Silla people also had a manufacturing plant in Java, Indonesia, because this place was a crossroads of Silla's Sea Silk Road and a source of raw materials and labors with a close relationship to Silla. Therefore, the face-inlaid glass bead was indeed self-made by Silla, who possessed the tradition of bead myths and hair topknot, and the high-level skills such as gold crowns and metal inlays.