• 한국해양학회지
• /
• v.30 no.2
• /
• pp.116-124
• /
• 1995

Marine, shallow seismic data have been acquired and processed by newly developed multi-channel(6 channel), PC-based digital recording and processing system. The digital processing system includes pre-processing, swell-compensation filter, frequency filter, gain correction, deconvolution, stacking, migration, and plotting. The quality of processed sections is greatly enhanced in terms of signal-to-noise ratio and vertical/horizontal resolution. The multi-channel, digital recording, acquisition and processing system proved to be and economical, efficient and easy-to-use marine shallow seismic tool.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.563-569
• /
• 2004

인공어초 정밀조사는 21세기 신 해양질서를 통해 연안해역정보가 더욱 중요시 대두되고 있는 시점에서 중요성이 강조되고 있으며, 우리나라 연안에 시설된 인공어초 시설구역은 미측심 구간으로 IHO의 수심 측정에 대한 권고를 받은 상태이다. 그렇기 때문에 신기술 장비인 DGPS와, 멀티빔, 사이드스캔소나등을 이용한 인공어초 정밀조사를 통해 효율적이고, 정확한 조사방법을 제시하고 해양측량에서 발생하는 오차의 보정 방법을 알아봄으로서 어초어장도 제작의 질적 향상 효과를 가져올 것으로 기대된다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.255-260
• /
• 2005

A Gravity characteristic of Svalbard archipelago in Arctic was studied by using ArcGP data. There are situated the Dasan science station. After bouguer correction, an edge effect of free-air anomaly, which is similar to topography, are not shown at passive continent margin, and after terrain correction with GTOPO30 data, gravity anomaly increases from continent to marine. that is deep connected with rise of Moho discontinuity. The correlation of topography and free-air anomaly shows that the isostasy of continent attains a little less than marine. After filtering, the residual anomaly are shown high and low anomalies related to fracture zone in continent and base depression or thick sedimentary layer in continental slope, marine.

• Korean Journal of Remote Sensing
• /
• v.23 no.4
• /
• pp.297-309
• /
• 2007

The first Korean geostationary weather satellite, Communications, Oceanography and Meteorology Satellite (COMS) will be launched in 2008. The ground station for COMS needs to perform geometric correction to improve accuracy of satellite image data and to broadcast geometrically corrected images to users within 30 minutes after image acquisition. For such a requirement, we developed automated and fast geometric correction techniques. For this, we generated control points automatically by matching images against coastline data and by applying a robust estimation called RANSAC. We used GSHHS (Global Self-consistent Hierarchical High-resolution Shoreline) shoreline database to construct 211 landmark chips. We detected clouds within the images and applied matching to cloud-free sub images. When matching visible channels, we selected sub images located in day-time. We tested the algorithm with GOES-9 images. Control points were generated by matching channel 1 and channel 2 images of GOES against the 211 landmark chips. The RANSAC correctly removed outliers from being selected as control points. The accuracy of sensor models established using the automated control points were in the range of $1{\sim}2$ pixels. Geometric correction was performed and the performance was visually inspected by projecting coastline onto the geometrically corrected images. The total processing time for matching, RANSAC and geometric correction was around 4 minutes.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.7-15
• /
• 2016

Ocean wave parameters are important for safety and efficiency of operation and routing of marine traffic. In this paper, by using X-band marine radar, we try to develop an effective algorithm for collecting ocean surface information such as current velocity, wave parameters. Specifically, by exploiting iterative refinement flow instead of using fixed control schemes, an effective algorithm is designed in such a way that it can not only compute efficiently the optimized current velocity but also introduce new cost function in an optimized way. Experimental results show that the proposed algorithm is very effective in retrieving the wave information compared to the conventional algorithms.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1373-1389
• /
• 2019

KOMPSAT-5 is the first satellite in Korea equipped with X-band Synthetic Aperture Radar (SAR) instrument and has been operated since August 2013. KOMPSAT-5 is used to monitor the global environment according to its observation purpose and the availability of KOMPSAT-5 is also highlighted as the need of high resolution wind data for investigating the coastal region. However, the previous study for the validation of wind derived from KOMPSAT-5 showed that the accuracy is lower than that of other SAR satellites. Therefore, in this study, we developed the correction equation of normalized radar cross section (NRCS or backscattering coefficient) for improvement of wind from the KOMPSAT-5 and validated the effect of the equation using the in-situ measurement of ocean buoys. Theoretical estimated NRCS and observed NRCS from KOMPSAT-5 showed linear relationship with incidence angle. Before applying the correction equation, the accuracy of the estimated wind speed showed the relatively high root-mean-square errors (RMSE) of 2.89 m s^-1 and bias of -0.55 m s^-1. Such high errors were significantly reduced to the RMSE of 1.60 m s^-1 and bias of -0.38 m s^-1 after applying the correction equation. The improvement effect of the correction equation showed dependency relying on the range of incidence angle.

• Geophysics and Geophysical Exploration
• /
• v.27 no.2
• /
• pp.119-128
• /
• 2024

Marine magnetic surveys provide a rapid and cost-effective method for pioneer geophysical survey for many purposes. Sea-surface magnetometers offer high accuracy but are limited to measuring the scalar total magnetic field and require dedicated cruise missions. Shipboard three-component magnetometers, on the other hand, can collect vector three components and applicable to any cruise missions. However, correcting for the ship's magnetic field, particularly viscous magnetization, still remains a challenge. This study proposes a new additional correction method for ship's viscous magnetization effect in vector data acquired by shipboard three-component magnetometer. This method utilizes magnetic data collected simultaneously with a sea-surface magnetometer providing total magnetic field measurements. Our method significantly reduces deviations between the two datasets, resulting in corrected vector anomalies with errors as low as 7-25 nT. These tiny errors are possibly caused by the vector magnetic anomaly and its related viscous magnetization. This method is expected to significantly improve the accuracy of shipborne magnetic surveys by providing corrected vector components. This will enhance magnetic interpretations and might be useful for understanding plate tectonics, geological structures, hydrothermal deposits, and more.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.257-263
• /
• 2019

Multilayered structures include lamination by relatively thick plies and thin interlayers. For efficient peridynamic analysis of dynamic fracturing multilayered structures, the interlayer is modeled using ghost peridynamic particles while the ply is formulated via real peridynamics. With the nonlocal ghost interlayer, one may keep the discretization resolution low for the ply. In this study, the characteristics of dynamic wave propagation through the nonlocal ghost interlayer in peridynamic analysis are investigated. It is observed that the interlayer not only binds adjacent plies, but also significantly influences energy transfer between plies, and thereby their deformation and motion. In addition, near a surface or boundary, peridynamic particles do not have a full nonlocal neighborhoods. This causes the effective material properties near the surface to be different from those in the bulk. Surface correction based on neighborhood volumes is employed. The impact of surface correction on wave propagation in multilayered structures is investigated.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.467-479
• /
• 2023

Satellite altimeters have continuously observed sea surface height (SSH) in the global ocean for the past 30 years, providing clear evidence of the rise in global mean sea level based on observational data. Accurate altimeter-observed SSH is essential to study the spatial and temporal variability of SSH in regional seas. In this study, we used measurements from the Ieodo Ocean Research Station (IORS) and validate SSHs observed by satellite altimeters (Envisat, Jason-1, Jason-2, SARAL, Jason-3, and Sentinel-3A/B). Bias and root mean square error of SSH for each satellite ranged from 1.58 to 4.69 cm and 6.33 to 9.67 cm, respectively. As the matchup distance between satellite ground tracks and the IORS increased, the error of satellite SSHs significantly amplified. In order to validate the correction of the tide and atmospheric effect of the satellite data, the tide was estimated using harmonic analysis, and inverse barometer effect was calculated using atmospheric pressure data at the IORS. To achieve accurate tidal corrections for satellite SSH data in the seas around the Korean Peninsula, it was confirmed that improving the accuracy of tide data used in satellites is necessary.

• Journal of Korea Ship Safrty Technology Authority
• /
• no.7 s.25
• /
• pp.47-63
• /
• 2008

저항성능 측면에서 한국 어선선형의 특성을 파악하기 위하여, 본 연구에서는 한국과 일본에서 건조되어진 대표적인 어선을 한 척씩 선정하여 두 어선의 선형적 특성을 비교하였다. 또한 한국 어선의 선형적 특성들, 즉 일부 대표적인 선형요소들과 이를 제외한 기타의 국부적 선형특성들을 일본어선의 선형을 참고로 보정함으로써 우리나라 어선들의 저항성능을 향상시킬 수 있는 방안에 대하여 연구하였다. 한국어선과 일본어선은 해양환경과 어업의 종류가 다를 뿐만 아니라 관습적인 이유 등으로 선형의 차이가 있게 되며, 이것은 한국 어선이 일본 어선에 비하여 같은 배수량을 가지더라도 배 길이가 짧은 반면 폭이 넓으며 흘수가 얕은 대표적인 선형요소들의 차이로 확인할 수 있다. 이러한 차이를 고려하여, 일본어선들에 대한 유효마력 추정프로그램을 한국어선들에 맞게 보정.개발하는 과정을 통하여 양국 어선의 저항성능 차이를 확인할 수 있었으며, 보정된 프로그램을 이용하여 연구대상의 한국어선에 대한 저항저감효과를 줄 수 있는 선형요소들을 도출함으로써 선형요소들의 변화에 따른 저항성능 효과를 확인할 수 있었다. 그러나 선형요소들의 보정에도 불구하고 한국어선의 저항성능은 여전히 일본어선의 그것보다 떨어짐을 확인하여, 본 연구에서는 대표적인 선형요소들뿐만 아니라 국부적 선형특성 즉, 선수부에서 차인선(chine line) 경사도, 용골의 형상, 선미길이(용골 끝에서 선미단까지의 거리)를 각각 보정해 봄으로써 보다 더 큰 저항성능의 개선효과를 확인하였다. 본 연구결과는 앞으로 저항성능이 우수하면서도 실용 가능한 개량된 한국 어선선형의 개발에 기초적인 자료로서 활용이 가능할 것으로 사료된다.