• 한국해양학회지
• /
• v.14 no.2
• /
• pp.71-77
• /
• 1979

Tidal waves and the fluctuation of current are studied by use of observed data on tidal level, flow velocity and river discharge in the estuarine region of the Nakdong River. Observed data on the tidal level at five stations are used to obtain the fluctuation of amplitude and phase of tides, and the change of the wave speed versus distance from the river mouth. Comnining these tidal data with the vertical distribution of horizontal velocity data, some characteristics of the periodic tidal flow are deduced: (1)Diminishing rates of the tidal amplitude ratio η / η$\_$0/ at high tide were 0.058η$\_$0H/ /Km at neap tides. The constant of phase change, K, was 0.035rad/km. (2)While proceeding landward, the shape of the tidal wave changes from symmetrical to asymmetrical. The traveling speed of the tidal wave crest was estimated to be 3.6∼5.2m/sec, while that of the tidal wave trough was 2.4∼ 3.5m/sec. (3)The flowing speed of the water varies periodically in accordance with the tidal period. The maximum speed of landward flow appeared approximately at two hours before the high tide, while that of seaward flow at two hours before the low tide. (4)The upstream boundary is deduced approximately to be 50km at spring tide and 44km at neap tide from the tidal velocity decreasing. the tidal influence area is estimated approximately to be 65km from the tidal amplitude damping.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.177-183
• /
• 2007

Flow characteristics of the cylinder wake controlled with a small control cylinder were experimentally investigated by the PN (Particle Image Velocimetry) technique. Flow visualization of the flow around a circular cylinder was conducted in the Circulating Water Channel. The control cylinder having diameter of d=5mm, 10mm and 20mm was installed behind a circular cylinder of D=50mm. And the Reynolds number were $Re=4.9{\times}10^3,\;Re=9.9{times}10^3$ and $Re=1.9{\times}10^4$. In this study, the frequency characteristics of the controlled wake were analyzed by using spectral analysis of the measured wake velocity signals. As a result, the controlled wake had smaller vortex shedding frequency than that of circular cylinder wake by the effect of the control cylinder. Governing parameters of the flow control were d/D, and Reynolds number and they largely influenced the frequency characteristics of the cylinder wake. And vortex shedding frequency appeared most lowly at d=0.2D

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.198-207
• /
• 1999

Five core sediments acquired from the Lake Shihwa are analyzed for variations of sedimentary environment and heavy metal pollution after the Shihwa seawall construction. The depositional environment of the study area is divided into anoxic, oxic and mixed suboxic conditions based on the C/N ratio and C/S ratios of organic matters. Controlling factors for redox condition are the water depth and the difference in industrial effluents supply. Correlations among geochemical elements (Mn, U, Mo) show a distinctive difference and thus can be used as an indicator of redox condition. The content of Al, Ti are dependent on the sediment characteristics, and the contents of heavy metals (Cr, Ni, Cu, Zn, and Pb) indicate heavy metal pollution. The concentrations of heavy metals are higher near Shiswa-Banwol industrial complexies than the central part of Lake Shihwa. Especially, the accumulation of the heavy metal at the surface sediments near Shihwa-Banwol industrial complex are two to eight times higher than in the center of Lake Shihwa.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.105-105
• /
• 2017

actuator system은 조선, 제철, 석유화학 및 중공업 등 다양한 분야에서 각종 유량 및 공기압 등을 제어하는 밸브에 필수적으로 사용되는 핵심 부픔이다. 최근 유정 개발 등 해양구조물 설치 조절이 복잡화 되면서 본 부품이 해양산업에 사용되는 빈도가 증가하고 있다. 이 경우 본 부품이 염분이 많은 바닷물 또는 주변 환경에 직접 노출되기 때문에 내식성이 매우 엄격하게 관리되고 있다. 본 부품에 부식이 발생할 경우 control system의 작동을 지배하는 구성 품에 부식이 발생하여 actuator로서 기능을 상실하여 오동작이나 설비 가동이 중단되는 사례가 빈번하다. 현재 본 부품의 내식성 향상을 위해서는 금속기 표면에 페인트를 사용하는 방법이 가장 널리 사용되고 있는 방법이다. 이 경우 금속 표면과 도장 면과의 사이에 기포발생이나 이물질 유입 등으로 인한 밀착성이 감소되거나 blister 등으로 인하여 도장 코팅 면이 박리되는 사례가 빈번하다. 이를 방지하기 위해서 최근 고 밀착성 내식용 도장 방법을 적용하고 있으나, 이 방법으로 도장한 부품의 표면에 충격 등으로 인한 결함이 발생할 경우 pitting corrosion 등 급격한 부식이 발생하여 이에 대한 근본족인 대책 수립이 절실한 실정이다. 본 연구에서는 근본적으로 금속기 표면과 밀착성이 우수한 화성피막 용액을 이용하여 희생양극에 의한 내식성을 확보하고, 다양한 용도에 적합한 색상 도료를 화성피말 위에 적용하여 화성피막 층의 보호 및 actuator의 목적에 맞는 도장을 하였다. 희생 양극효과를 극대화 할 수 있는 최적 화성피막 층은 $15{\mu}m$이며 이때 1,000시간 이상의 내식성을 확보하였다. 이 경우 이론적인 내식 수명은 2년으로 추정할 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.277-288
• /
• 1995

Prediction of turbidity due to fine-grained bed material load under wave action is critical to any assessment of anthropogenic impart on the coastal or lacustrine environment Waves tend to loosen mud deposits and generate steep suspension concentration gradients, such that the sediment load near the bottom is typically orders of magnitude higher than that near the surface. In a physically realistic but simplified manner, a simple mass conservation principle has been used to simulate the evolution of fine sediment concentration profiles and corresponding erodible bed depths under progressive, nonbreaking wave action over mud deposits. Prior field observations support the simulated trends. which reveal the genesis of a near-bed. high concentration fluidized mud layer coupled with very low surficial sediment concentrations. It is concluded that estimation of the depth of bottom erosion requires an understanding of mud dynamics and competent in situ sediment concentration profiling. Measurement of sediment concentration at the surface alone, without regard to the near-bed zone, can lead to gross underestimation of the erodible bed depth.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.466-473
• /
• 2011

The buoyancy and initial momentum fluxes make near-field dominated by buoyant jet when thermal discharge releases underwater. In order to estimate prediction capabilities of those near-field phenomena, non-hydrostatic RANS applied CFD(Computational Fluid Dynamic) model was used. Condition of model was composed based on past laboratory experiments. Numerical simulations carried out for the horizontal buoyant jet in the stagnant flow and vertical buoyant jet into crossflow. The results of simulation are compared with the terms of trajectory and dilution rate of laboratory experiments and analytic model(CorJET) results. CFD model showed a good agreement with them. CFD model can be appropriate for assessment of submerged thermal discharge effect because CFD model can resolve the limitations of near-field analytic model and far-field quasi 3D hydrodynamic model. The accuracy and capability of the CFD model is reviewed in this study. If the computational efficiency get improved, CFD model can be widely applied for simulation of transport and diffusion of submerged thermal discharge.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.458-465
• /
• 2011

Characteristics of nearshore surge intensity were investigated by analyzing the tide data at 20 tidal stations. Statistical analysis of the surge data show that surge heights at the western coast are far greater than those at southern and eastern coasts, implying that each coast has its own classified characteristics. Surge height data greater than 30 cm were chosen and their intensities were calculated, and then, typhoon-induced surges were separated. The results show that while surge intensity at the western coast is conspicuous in winter due to the monsoon, it is conspicuous in summer due to the typhoon at other coasts. EOF analysis show that the 1st eigenvector at the western coast is prominent, which is considered to be consistent with above mentioned results.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.2
• /
• pp.101-111
• /
• 2010

Characteristics of large-height swell-like waves that repeatedly occurred on the Korean East Coast in winter season were analyzed by using the wave observation data and the meteorological data. Based on the results of the data analysis, it was demonstrated that the swell-like waves have been generated due to the long-lasting strong northeasters in the East Sea, which were formed as a result of the low pressure trough in the vicinity of the extratropical low pressure system that advanced to East Sea from the China inland with decreasing its central pressure. Among the recently occurred events of the swell-like waves, the characteristics of the two events in October 2005 and 2006 were predominantly wind waves. Meanwhile, the one in February 2008 seems to be occurred by the initial wave growth due to wind waves followed by the secondly increase of the wave height due to longer-period swell.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.1
• /
• pp.36-45
• /
• 2017

In the present study, the storm waves at the Korean Straits of April, 2016 have been reproduced by the wave hindcasting, and then their characteristics were investigated. Before the wave hindcasting, the wave measurements at the Korean Straits were analyzed. The analysis showed that the waves at the Korean Straits were dominated by the Northeastern waves, same as those in the East Sea. Accordingly, the wave hindcasting was been carried out with the same condition in Ahn et al. (2016). In the numerical results, the maximum significant wave height at the Korean Straits was 5.06 m, and the corresponding significant wave period was 9.2 s. The computed significant wave heights and wave periods were overestimated by 4 cm and 0.8 s, respectively. After the wave hindcasting, the computed significant wave heights and peak periods were compared with the JONSWAP relationship. This comparison showed that the storm waves at the Korean Straits were close to wind waves, not swell.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.118-128
• /
• 1999

The shape of the net mouth in a midwater trawl gear is examined by measuring towing speed, gear resistance, the width of otter boards, net height, and so on of a full-scale gear in operation. In addition, a mathematical model is developed to predict shapes of the net mouth. In the model, shapes of head, ground, side ropes, which governs the shape of net mouth, are assumed as a catenary. The validity of the model is tested with observations. The results can be summarized as follows: 1. The warp tension and vertical opening of the gear is highly dependent to the towing speed. The depth of the gear and width of otter boards are very sensitive to the variations of the warp length. 2. The model results indicate that the wing tip of the head and side ropes is reduced and the vertical distances of the head and side ropes sagged to the back with increasing towing speed. 3. The results of comparing the measured net height with calculated side rope height were satisfying. 4. The results of analysis showed the vertical axis of the net mouth was decreased and the width of the net mouth was little changed when the towing speed increased.