• Korean Journal of Remote Sensing
• /
• v.36 no.2_2
• /
• pp.365-377
• /
• 2020

Continuous monitoring and immediate response is essential to protect the national maritime territory and maritime resources from the activities of illegal ships. Synthetic Aperture Radar (SAR) images with a wide range of images are effective for maritime surveillance asthe weather and day-night conditions rarely affect to image acquisition. However, an effective ship detection is not easy due to the huge data size of SAR images and various characteristics such as the speckle noise. In this study, the Human Visual Attention System (HVAS) algorithm was applied to KOMPSAT-5 to extract the initial targets, and the SAR-Split algorithm depending on the imaging modes was used to remove false alarms. The detected targets were finally selected by the Constant False Alarm Rate (CFAR) algorithm and matched with the ship's Automatic Identification System (AIS) information. Overall, the detected targets were well matched with AIS data, but some false alarms by ship wakes were observed. The detection rate was about 80% in ES mode and about 64% in ST mode. It is expected that the developed ship detection algorithm will contribute to the construction of a wide area maritime surveillance network.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.311-318
• /
• 2004

It is very important for the safe navigation and fishing operation to ensure the hull response of a fishing vessel in rough seas. This is an experimental study on the dynamical characteristics of ship's motion during operating job and sailing in the real sea. The experiments were carried out on the small stern trawler in operating job and sailing, and then the ship's roll and pitch motion were simultaneously recorded by P/C according to the wave directions. From these data, the statistical properties and power spectra were obtained and the analysis of ship's motions in the both case were made. The results obtained are summarized follows : (1) The amplitudes of pitch motion don't appear a big different between trawl job and sailing, but at bow seas, its in sailing have a tendency to increase more than in trawl job. The amplitudes of roll motion appear a bog different between trawl job and sailing, but at beam sea, that slightly decreasing tendency. (2) The peak period of pitch motion in trawl job and sailing change, but that of roll motion don't change according to the direction of waves. (3) The warp tention cause the motion of hull to be reduce, if the tention of each side have a ballance.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.2
• /
• pp.77-83
• /
• 2012

Numerical analyses through Computational Fluid Dynamics have been performed to investigate the seawater flow field characteristics for various shrouds used in horizontal axis tidal current turbine systems. Seawater flow characteristics are largely influenced under constant tidal current velocity by the shroud geometry and there is considerable difference in fluid velocity distributions around the shrouds. Especially the location and magnitude of maximum seawater flow velocity directly affect turbine performance for power generation. For the cylinder-diffuser type shroud system whose cylinder and diffuser parts have the same length accelerated flow region is formed in the overall cylinder part while maximum velocity in the nozzle-diffuser type whose nozzle and diffuser parts have the same length with symmetry, locally appears near the minimum sectional area. In case of cylinder-diffuser type shroud fluid velocity increases rather high compared with current velocity. And fluid velocity at the centerline gradually increases from the entrance, and then decreases rapidly after reaching a peak close to the middle of the cylinder part unlike the nozzle-diffuser while there is not much variation near the rear of the shroud. These results of the seawater flow characteristics with various shroud geometries can be applied to optimal design for the development of efficient tidal current power generation systems.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.474-481
• /
• 2011

The discharge coefficient and spatial velocity distribution were clarified by carrying out a physical experiment to assess the performance of sluice for tidal power generation. The physical experiment was performed by manufacturing 10 sluce models whose scale is 1/70 of the prototype and installing it in the planar open channel, which has apron sections in front of and behind the sluice models. In particular, it was attempted to reasonably determine the locations and method of measuring water levels that may affect estimation of the discharge coefficient. Based on the experimental results for various conditions of discharges and tidal levels, the discharge coefficient of the sluice in the experiment was estimated as 1.3 to 1.4. Meanwhile, it was found that velocities were 2~3% faster at the sluices near the central region whereas 4~5% slower at the sluices on both sides, in comparison to the average value of the mean velocities of the ten sluices.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.4
• /
• pp.180-188
• /
• 2017

Recently, as the strength of winds and waves increases due to the climate change, abnormal waves such as swells have been also increased, which results in the increase of downtime events of loading/unloading in a harbour. To reduce the downtime events, breakwaters were constructed in a harbour to improve the tranquility. However, it is also important and useful for efficient port operation by predicting accurately and also quickly the downtime events when the harbour operation is in a limiting condition. In this study, numerical simulations were carried out to calculate the wave conditions based on the forecasted wind data in offshore area/outside harbour and also the long-term observation was carried out to obtain the wave data in a harbour. A forecasting method was designed using an auto-regressive (AR) and artificial neural networks (ANN) models in order to establish the relationship between the wave conditions calculated by wave model (SWAN) in offshore area and observed ones in a harbour. To evaluate the applicability of the proposed method, this method was applied to predict wave heights in a harbour and to forecast the downtime events in Pohang New Harbour with highly complex topography were compared. From the verification study, it was observed that the ANN model was more accurate than the AR model.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.151-158
• /
• 2016

Tidal farm is a multi-arrayed turbine system for utilizing tidal stream energy. For horizontal-axis turbine(HAT) system, it is recommended that each unit has to be deployed far apart in order to avoid hydrodynamic interference among turbines, as proposed by the European Marine Energy Centre(EMEC). But there is no rule for the arrangement of vertical-axis turbine(VAT) yet. Moreover it has been reported that a proper arrangement of adjacent turbines can enhance the overall efficiency even greater than an arrangement without mutual interference effect. This paper suggests the layout of VATs showing the better performances, which turned out to be quite different from HATs' arrangement. Numerical calculations were performed to investigate the performance variation in terms of the rotational direction as well as the distance between turbines. It has been shown that the best combination of rotational direction and distance between turbines can increase its performance higher about 9.2% than that of two independently operated turbines. It is likely that such improvement is due to the increased velocity between adjacent turbines. For diagonally arranged turbines, the maximum normalized mean power coefficient was obtained to be higher about 5.6% than that of two independent turbines. It is expected that the present results can be utilized for conceptual design of tidal farm to harness the tidal stream energy.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2012

To arrange effectively artificial reefs for marine afforestation, tidal currents were analyzed by numerical experiments, and particle tracking based upon tidal currents were carried out to clarify the path of algae spore. The experiments were carried out by EFDC (Environmental Fluid Dynamics Code), and water column was vertically divided 10 layers. Tidal current patterns showed to be affected by main current at outside of study area, and circle currents of two were observed from analysis of residual currents. Particle tracking were experimented for 15 days at 2 installation places in which artificial reefs for marine afforestation would be deployed. According to the results of particle tracking experiment, particle movement at St.1 showed belt type along coastal line, and St.2 showed ellipse type at 300~500 m distant from coastal line. It suggest that artificial reefs for marine afforestation should be installed belt zone at station of St.1 and ellipse zone at St.2. Modelling algae transport was also tested to account for local dispersion of algae spore due to the suspended materials.

• 한국해양학회지
• /
• v.24 no.1
• /
• pp.15-28
• /
• 1989

A study on quantitative phytoplankton samples, hydrographic conditions (temperature, salinity, dissolved oxygen), and nutrients has been performed in the southern waters of the Korean East Sea in early spring. Phytoplankton community showed close correlation with hydrographic conditions. This study area could be divided into three phytohydrographic regions; 1) East Korean Warm Water Region (a branch of Tsushima Current), 2) North Korean Cold Water Region, and 3) offshore water region not affected by other two water regions. Vertical distribution of phytoplankton is dependent upon stability of water column and nutrient concentration. Nutrient concentration shows characteristic distribution according to water masses. N/P ratio of ca. 3 in surface layer indicates that nitrogen is the major limiting nutrient in this area. N/P removal ratio was 12.54 ($r^2$ = 0.96), consistent with the Redified ratio. Primary nitrite maxima at the nitracline depths are thought to be formed by phytoplankton exudation. Secondary nitrite maximum was observed in coastal area with dissolved oxygen content of >5.2 ml/l much higher than <0.25 ml/l in other areas. The mechanism of secondary maximum is different from that of other regions, and whether it may be due to in situ degradation of organic matter by bacterial activity is still open to discuss.

• 한국해양학회지
• /
• v.4 no.1
• /
• pp.36-48
• /
• 1969

The larvae of Mytilus coruscus were grown at the room temperature of approximately 15.1C under several different sulture conditions, i.e., salinity, population of the larvae, density and kind of food organisms, etc. (1) The egg of Mytilus coruscus obtained in the laboratory measured about 73.0${\mu}$ in diameter. The embryos gradually developed into larvae up to 179.0${\mu}$ shell length with the shell height of 135.9${\mu}$ even in the absence of the algal food. Beyond this size, however, the growth of larvae was considerably retarded, indicating that the better growth could be expected if the food began to be fed four days after spawning. (2) The larvae began settling upon reaching 281.4${\mu}$ to 310.9${\mu}$ in shell length or 264.3${\mu}$ to 301.9${\mu}$ in shell height. When the shell length reaches 322.6${\mu}$ to 337.1${\mu}$, the shell height also reaches about the same, i.e., 321.5${\mu}$ to 346.2${\mu}$. (3) Daily rate of food consumption was determined by the size of the larvae and the species of the algal food. Regardless of the species of food given, the rage of food consumption remained almost the same until the larva reached the straight-hinge stage, and marked variations were found as the larvae grew larger. Daily rate of food consumption was shown as follow; Chaetoceros calcitrans : Y=2.99167e$\^$0.000018243x$\^$2// Cyclotella nana : Y=3.00324e$\^$0.000015481x$\^$2// Monochrysis lutheri : Y=3.000056e$\^$0.000014485$\^$2// (4) Suitable amount of the food to be given was about five times of the consumed food by Mytilus coruscus. (5) When the numbers of the larvae was higher than ten per milliliter, the growth was significantly retarded. (6) Monochrysis lutheri and Cyclotella nana were much better than Chaetoceros calcitrans as the food of Mytilus coruscus, and even the same food organism showed some difference with the age of the organism. (7) Sea water of higher salinity showed the better result in the growth of the larvae and the water with the specific gravity of 1.020 or below was dangerous for the larvae. (8) The mean growth of the larvae of Mytilus coruscus under lavorable condition was shown as follows: shell length 121.8${\mu}$ to 179.0${\mu}$ : Y=119.18+7.42X 196.7${\mu}$ to 322.6${\mu}$ : Y=203.144+7.687X 322.6${\mu}$ to 985.1${\mu}$ : Y=302.5978+11.8356X shell height 86.3${\mu}$ to 135.9${\mu}$ : Y=86.22+6.40X 158.1${\mu}$ to 321.5${\mu}$ : Y=162.998+10.027X 321.5${\mu}$ to 1,215.4${\mu}$ : Y=309.3701+16.258X Relationships between the shell length and shell height were shown as follows: shell length 121.8${\mu}$ to 179.0 : Y=0.83726X-15.79165 196.7${\mu}$ to 322.6 : Y=1.29909X-100.58610 322.6${\mu}$ to 985.1${\mu}$ : Y=1.3536X-101.6806

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.3 no.4
• /
• pp.271-275
• /
• 1998

Controversial observations on the effect of pre-attached bacteria on the attachment of diatoms to artificial surfaces immersed in seawater have been made. Furthermore, it is not known whether or not pre-attached bacteria on artificial surfaces influence attachment of diatoms in natural seawater. In this study, we used various surfaces to which marine bacteria were pre-attached for different incubation periods. In the first experiment, glass slides were initially attached by marine natural bacteria with different exposure time (0-133 hr) and then immersed into seawater for a certain time period. The attachment of diatoms was not affected by the abundance of pre-attached bacteria (p > 0.05). The maximum abundance of attached diatoms was found on control surfaces, and the minimum abundance on surfaces where attached bacterial abundance was highest. In the second experiment, glass slides and acryl slides, either attached by marine natural bacteria for 6 days or coated by agar, were immersed in seawater. Untreated slides were also employed. On the surfaces of acryl slides with the most abundant attached bacteria ($5.4{\pm}0.02{\times}10^5\;cells\;cm^{-2}$), abundances of attached diatoms were less than those on untreated slides. On the surfaces of glass slides with bacterial abundance of $2.5{\pm}1.0{\times}10^5\;cells\;cm^{-2}$, however, abundances of attached diatoms were not different from those of untreated slides. On the agar-coated slides, the immigration rate and immigration coefficient were on average > 2 folds compared to other surfaces, indicating high rates of diatom attachment on mucilage simulated surfaces. Therefore, it seems that pre-attachment of bacteria is not prerequisite for the attachment of diatoms on artificial surfaces.