• 제목/요약/키워드: 해양소음

검색결과 196건 처리시간 0.023초

고속 여객선 선미부 과대 진동/소음 감소를 위한 연구 (Study on Reduction of Excessive Noise and Vibration of Aft Part of High Speed Ro-Ro Passenger Ship)

  • 신윤길
    • 한국해양공학회지
    • /
    • 제33권2호
    • /
    • pp.196-202
    • /
    • 2019
  • In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

희소 베이지안 학습 기법을 적용한 초생 프로펠러 캐비테이션 위치추정 연구 (A study on the localization of incipient propeller cavitation applying sparse Bayesian learning)

  • 최하민;양해상;이석규;성우제
    • 한국음향학회지
    • /
    • 제42권6호
    • /
    • pp.529-535
    • /
    • 2023
  • 초생 프로펠러 캐비테이션에 의한 소음은 광대역 신호를 방출하는 적은 수의 음원으로 가정된다. 전통적인 캐비테이션 위치 추정 방법은 정확도가 낮으며, 해상도가 낮아 인접한 음원을 구분할 수 없다는 한계점이 있다. 희소 베이지안 학습 기법은 희소성을 가지는 신호에 대해 고해상도의 복원 성능을 보이는 기법으로, 전통적인 캐비테이션 위치추정 방법에 비해 고해상도로 위치를 추정하는 특성을 가진다. 본 논문에서는 희소 베이지안 학습 기법을 적용한 초생 프로펠러 캐비테이션 위치 추정 기법을 제안하고 실제 모형선 실험 결과를 통해 제안한 기법이 정확도 및 해상도 측면에서 기존 방식보다 뛰어남을 보였다.

에어마스커의 기포크기 추정 경험적 모델 (An empirical model of air bubble size for the application to air masker)

  • 박철수;정소원;김건도;박영하;문일성;임근태
    • 한국음향학회지
    • /
    • 제40권4호
    • /
    • pp.320-329
    • /
    • 2021
  • 본 논문에서는 선박 수중방사소음 저감을 위한 에어마스커의 기포크기 추정 모델을 제시하였다. 제시된 모델은 Rayleigh의 제트 불안정 모델과 연속 조건을 이용하여 유도된 기존 모델에 공기의 제트유속을 도입함으로써 저속유동 조건에서 발산하는 단점을 보완 하였다. 공기의 제트유속은 유동이 없는 경우 기포의 크기를 이용하여 추정하였다. 유동이 없는 매질에서 기포의 크기는 분사된 공기의 레이놀즈수를 기반으로 층류구간, 천이구간, 그리고 난류구간으로 나누어 경험적 방법으로 추정 하였다. 제시된 기포크기 추정 모델은 Computational Fluid Dynamics(CFD) 해석결과 그리고 기존 문헌의 실험결과와 비교하여 잘 일치함을 확인하였다. 끝으로, 음향 역산법을 활용하여 대형터널에서 수행된 에어마스커 공기분사 실험의 계측된 삽입손실로부터 기포의 분포를 추정하였다. 역산된 기포분포와 기포크기 추정 모델의 추정 결과를 비교하였다.

베이즈 분류기를 이용한 수중 배경소음하의 과도신호 분류 (Classification of Transient Signals in Ocean Background Noise Using Bayesian Classifier)

  • 김주호;복태훈;팽동국;배진호;이종현;김성일
    • 한국해양공학회지
    • /
    • 제26권4호
    • /
    • pp.57-63
    • /
    • 2012
  • In this paper, a Bayesian classifier based on PCA (principle component analysis) is proposed to classify underwater transient signals using $16^{th}$ order LPC (linear predictive coding) coefficients as feature vector. The proposed classifier is composed of two steps. The mechanical signals were separated from biological signals in the first step, and then each type of the mechanical signal was recognized in the second step. Three biological transient signals and two mechanical signals were used to conduct experiments. The classification ratios for the feature vectors of biological signals and mechanical signals were 94.75% and 97.23%, respectively, when all 16 order LPC vector were used. In order to determine the effect of underwater noise on the classification performance, underwater ambient noise was added to the test signals and the classification ratio according to SNR (signal-to-noise ratio) was compared by changing dimension of feature vector using PCA. The classification ratios of the biological and mechanical signals under ocean ambient noise at 10dB SNR, were 0.51% and 100% respectively. However, the ratios were changed to 53.07% and 83.14% when the dimension of feature vector was converted to three by applying PCA. For correct, classification, it is required SNR over 10 dB for three dimension feature vector and over 30dB SNR for seven dimension feature vector under ocean ambient noise environment.

가두리 양식장 주변의 수중환경소음과 생물소음의 특성에 관한 연구 (A Study on the Characteristics of the Underwater Ambient Noise and Biological Noise in Fish Farm Cages)

  • 박태건
    • 수산해양기술연구
    • /
    • 제35권1호
    • /
    • pp.41-49
    • /
    • 1999
  • This paper describes to analyze the underwater ambient noise and biological noise of cultivating fishes in the fish farm cages at the seawater Tongyong-kun, KyongNam and lake of Chungju, Chech'on, ChungBuk from 10 to 19 Oct. 1997, in order to find out the characteristics of these noises. The results obtained were as follows; (1) The ambient noise around the fish farm cages at lake of Chungju was 10~200Hz frequency range, 70~105dB spectrum level. The central frequency was 50~70Hz, changing of ambient noise was getting bigger than 10~200Hz in 200Hz~2kKz frequency by wind, water current. (2) The frequency of noise source around the fish farm cage at the seawater of Tongyong-kun was 20~200Hz, spectrum level was 80~100dB while feed factory was working around the fish farm cage. When feed factory did not work, noise source was 10~600Hz frequency range, 70~90dB spectrum level. It was 10dB less than that of while feed factory was working, and then the central frequency was 70Hz. (3) The vessel noise of excursion ship had changed largely at 100dB spectrum level in 10~500Hz frequency band, and the fishing boat had 20Hz~2kHz frequency range. (4) The biological noise in the fish farm cage at lake of Chungju, which was feeding of Cyprinus carpio, 2was 10~30Hz frequency, 70~104dB spectrum level. The central frequency was 75Hz. The biological noises in the fish farm cage at the seawater of Tongyong-kun, which were feeding and swimming noise, had very different spectrum pattern by species, and the frequency band was 10~800Hz.

  • PDF

수중음에 대한 고등어 어군의 반응 (A Response of the Shoal of Chub Mackerel ( Scomber Japonics , HOVTTYUN ) to Underwater Sound)

  • 서두옥
    • 수산해양기술연구
    • /
    • 제25권1호
    • /
    • pp.12-17
    • /
    • 1989
  • 고등어 낚시어장에서 150Hz~200Hz의 순음과 단속순음을 수중스피커로 수중에 방성하였을 때 고등어 어군의 반응과 어선의 보조기관의 수중소음을 측정\ulcorner분석한 결과를 요약하면 다음과 같다. 1. 보조기관만을 운전하였을 때 수중소음의 중심주파수와 음압레벨은 수심 20m에서 각각 500Hz, 146.8dB이었다. 2. 주파수 150Hz와 200Hz의 순음의 음압레벨은 수심 30m, 70m, 120m에서 각각 141.0dB와 146.6dB, 120.0dB와 126.6dB, 114.3dB와 120.5dB이였다. 3. 수중음을 방성해서 5분 전후에 고등어 어군이 유집반응을 보였다. 4. 주파수 150Hz와 200Hz의 순음보다는 단속순음이 좋은 유집반응을 나타냈다

  • PDF

초고속 해상무선통신망 무선설비와 해상업무용 무선설비간 전파 간섭 영향 및 대책 연구 (A Study on the Effect and Countermeasures for Radio Wave Interference between LTE-Maritime Radio Facilities and Maritime Radio Service Facilities)

  • 이정훈;문형진;김부영;심우성
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2021년도 추계학술대회
    • /
    • pp.119-120
    • /
    • 2021
  • 국내 어선의 해상업무용 무선설비 및 항해 장비는 IEC 60945를 준용한 KN60945_60533의 성능기준을 따르도록 규정하고 있다. LTE-M 송수신기는 해상업무용 무선설비에 포함되지 않아 기존 선박용 장비들과 동일한 기준을 적용받지 않기 때문에, 방사 방출 또는 전도 방출에 의한 간섭으로 기존 해상업무용 무선설비에 가청 소음을 발생하는 원인이 되고 있다. 본 논문에서는 초고속해상무선통신망 무선설비를 소형선으로 확대보급하기 위해 선결 사항으로 위와 같은 간섭 영향의 원인을 분석하고 관련 대책을 검증 제안한다.

  • PDF

정합장 기반 표적 위치추정 시 모드공간 분석을 통한 간섭 신호 제거 기법 (Matched Field Source Localization and Interference Suppression Using Mode Space Estimation)

  • 김경섭;성우제;표상우
    • 한국음향학회지
    • /
    • 제27권1호
    • /
    • pp.40-46
    • /
    • 2008
  • 천해 영역에서 선박과 같은 수상 소음원의 간섭 신호는 정합장처리를 이용한 수중 표적 탐지 및 위치추정 기법 적용에 있어 문제점으로 남아있다. 정지 음원의 경우 수신기공간의 음장에 대한 고유벡터분해를 통해 각 음원 성분을 분리하고 간섭 신호 성분을 제거할 수 있다. 하지만 일반적인 이동 음원 환경에서는 각 신호 성분의 에너지가 수신 음장의 부분공간에 퍼지게 되므로, 고유값 분포 비교만으로 각 신호 성분을 구별하기 어렵게 되거나 하나의 고유벡터에 각 신호성분이 섞이는 경우도 발생한다. 본 논문에서는 수상 음원과 수중 음원 신호의 물리적 특성 차이를 이용한 모드공간 간섭 신호 제거 기법을 제안하였다. 이 기법은 모드-공분산행렬에 대한 고유벡터분해를 통해 간섭 신호 성분을 판별하며, 이 성분들을 부분공간에서 제거함으로써 차폐되었던 표적 신호를 복원하고 위치추정을 가능하게 한다. 이를 모의실험을 통해 확인하고 결과에 대해 논의하였다.

Auto pilot 와 water jet drive system 간의 Interface 설계 (Design on the interfacing between auto-pilot and water-jet drive system)

  • 진형두;최조천
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.535-538
    • /
    • 2009
  • Auto Pilot은 전자해도나 플로터를 이용하여 항행하고자 하는 코스를 입력 시킨 후 운행모드를 자동운항에 위치시키면 자동으로 경로를 따라 선박을 이동시키는 시스템이다. Water Jet 추진장치는 엔진과 연결된 펌프를 가동해 배 밑바닥에 있는 흡입구로부터 물을 빨아들인 후에 배 내부에 설치된 유도관을 거쳐 노즐을 통해 가속된 물을 배 뒤쪽으로 분사하면서 배를 앞으로 밀어주는 힘을 발생시키는 추진 장치다. Water Jet 추진장치는 수심의 영향이 적고, 고속영역 일수록 추진 효율이 높고 진동과 유동소음 측면에서도 매우 유리한 장점을 갖고 있어 새로운 추진시스템으로 국내외 적으로 수요가 확대되고 있다. 하지만 Auto Pilot 와 Water Jet 추진시스템의 신호 체계가 달라 상호간 효과적으로 신호를 전달할 수 있는 장치가 필요하다. 본 논문은 기존의 Auto Pilot 와 Water Jet 추진시스템의 신뢰성 있는 통신을 할 수 있도록 상호 연동하는 Interface 장치를 설계하였다.

  • PDF

오토파일럿과 워터젯시스템의 피드백 제어계 인터페이스 모듈의 구현 (A embodiment of the interface module for feed back control between auto-pilot with water-jet system)

  • 오진성;최조천
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 추계학술대회
    • /
    • pp.1108-1111
    • /
    • 2009
  • 디지털 오토파일럿은 전자해도상에서 선박의 운항예정 코스를 설정하여 입력시킨 후, 자동운항 모드로 세트하면 선박이 운항코스의 경로를 따라 자동으로 항행하는 시스템이다. 워터젯시스템은 엔진과 연결된 임펠러(회전익)를 구동하여 선저에 선수방향으로 설치된 흡입구를 통하여 해수를 흡입하여 압력을 높인 후, 노즐을 통하여 가속된 해수를 선저의 선미방향으로 분사시키므로써 선체를 조향하고 추진시키는 장치이다. 그러므로 워터젯시스템은 수심이 낮은 해역에서도 운항이 가능하며, 고효율의 고속추진, 상대적으로 낮은 진동과 유동소음 등의 환경에서 매우 효과적이므로 새로운 추진시스템으로 수요가 확대되고 있다. 그러나 워터젯시스템의 전기적인 제어신호는 표준화되어있지 않으므로 디지털 오토파일럿의 표준화된 인터페이스를 제공하지 않는다. 본 논문은 표준화된 오토파일럿과 워터젯시스템 사이에서 연동하므로써 고속선박을 신뢰성 있게 조향할 수 있는 피드백 제어인터페이스 모듈을 설계하였다.

  • PDF