• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.3
• /
• pp.138-149
• /
• 2008

Rapid accumulation of carbon dioxide in the atmosphere for the past century leads to acidify the surface ocean and contributes to the global warming as it forms acid in the ocean and it is a green house gas. In order to curb the green house gas emissions, in particular carbon dioxide, various multilateral agreements and programs have been established including UN Convention of Climate Change and its Kyoto Protocol for the last decades. Also a number of geo-engineering projects to manipulate the radiation balance of the earth have been proposed both from the science and industrial community worldwide. One of them is ocean fertilization to sequester carbon dioxide from the atmosphere through the photosynthesis of phytoplankton in the sea. Deliberate fertilization of the ocean with iron or nitrogen to large areas of the ocean has been proposed by commercial sector recently. Unfortunately the environmental consequences of the large scale ocean iron fertilization are not known and the current scientific information is still not sufcient to predict. In 2007, the joint meeting of parties of the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter, 1972 and 1996 Protocol (London Convention/Protocol) has started considering the purposes and circumstances of proposed large-scale ocean iron fertilization operations and examined whether these activities are compatible with the aims of the Convention and Protocol and explore the need, and the potential mechanisms for regulation of such operations. The aim of this paper is to review the current development on the commercial ocean fertilization activities and management regimes in the potential ocean fertilization activities in the territorial sea, exclusive economic zone, and high seas, respectively, and further to have a view on the emerging international management regime to be London Convention/Protocol in conjunction with a support from the United Nations General Assembly through The United Nations Open-ended Informal Consultative Process on Oceans and the Law of the Sea.

• Environmental Analysis Health and Toxicology
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2010

Toxicity assessment of ocean dumping wastes (dye waste, urban sewage, food waste) were examined in the fertilization and embryo development rates of the Sea Urchin, Hemicentrotus pulcherrimus. Spawning was induced by injecting 1 mL of 0.5 M KCl into coelomic cavity. Males released white or cream-colored sperms and females released yellow or orange-colored eggs. Experiments were began within 30 min the collection of both gametes. The fertilization and embryo development rates test were performed for 10 min and 64 h after fertilization, respectively. The fertilization and embryo development rates in the control condition (not including ocean dumping wastes sludge elutriate) were greater than 90%, but suddenly decreased with increasing of ocean dumping waste sludge elutriate concentrations. The fertilization and normal embryogenesis rates were significantly inhibited in all waste sludge elutriate from dye waste ($EC_{50}$=4.37; $EC_{50}$=1.76), urban sewage ($EC_{50}$=5.79; $EC_{50}$=2.00) and food waste ($EC_{50}$=7.68; $EC_{50}$=2.16), respectively. The NOEC (<3.13) and LOEC (3.13) of fertiliztion and normal embryogenesis rates very similar in all waste sludge elutriate. These results suggest that biological assay using the fertilization and embryo development rates of H. pulcherrimus are very useful test method for the ecological toxicity assessment of ocean dumping wastes.

• Environmental Analysis Health and Toxicology
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2009

Toxicity of ocean dumping wastes(dye waste, urban sewage, food waste) were examined by observing fertilization and embryo development rates of the Sea Urchin, Strongylocentrotus nudus. Spawning was induced by injecting 1 mL of 0.5 M KCl into coelomic cavity. Males released white or cream-colored sperms and females released yellow or orange-colored eggs. Experiments were began within 30 min after the collection of both gametes. The fertilization and embryo development rates tests were performed for 10 min and 48 h after fertilization, respectively. The fertilization and embryo development rates in the control condition(not including ocean dumping wastes sludge elutriate) were greater than 90%, but markedly decreased with increasing concentrations of ocean dumping waste sludge elutriate. The fertilization and normal embryogenesis rates were significantly inhibited in all waste sludge elutriate from dye waste($EC_{50}$=5.76; $EC_{50}$=4.53), urban sewage($EC_{50}$=9.82; $EC_{50}$=9.67) and food waste($EC_{50}$=3.90; $EC_{50}$=3.27), respectively. The NOEC(>3.13%) and LOEC(3.13%) of fertiliztion and normal embryogenesis rates very similar in all waste sludge elutriate. These results suggest biological assay using the fertilization and embryo development rates of S. nudus are very useful test method for the ecological toxicity assessment of ocean dumping wastes.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.3
• /
• pp.135-150
• /
• 2010

At the Intergovernmental Meeting held in 1972, the London Convention was adopted to prevent marine pollution from dumping of wastes and other matter. After that, at the special meeting held at the Headquarters of the International Maritime Organization in 1996, the London Convention was revised to consider advances in technology of treatment and disposal of wastes and to reflect changes in understanding of marine environment and then the London Protocol was concluded. The London Protocol states more concrete management system for ocean dumping than the London Convention and also provides that the Meeting of Contracting Parties shall establish those procedures and mechanisms necessary to assess and promote compliance with the Protocol. With the London Protocol in force since 24 March 2006, the Meeting of Contracting Parties adopted the 'Compliance Procedures and Mechanisms (CPM) pursuant to Article 11 of the 1996 Protocol to the London Convention 1972' and established the Compliance Group in 2007. According to the CPM, members of the Compliance Group shall be nominated by Contracting Parties, based on equitable and balanced geographic representation of the five Regional Groups of the United Nations, and elected by the Meeting of Contracting Parties. In 2009, the Republic of Korea nominated a member of the Compliance Group to be subsequently elected by the Meeting of Contracting Parties with the approval of other states in Asia Group. Through the United Nations Regional Group System based on geographical identity or political affinity, Contracting Parties to the London Protocol are expected to form a voting bloc or to exchange information in meetings on the London Protocol. In this sense, it is noteworthy that the London Protocol introduced marine environmental management system for comprehensive prohibition of ocean dumping with exception of the so-called 'reverse-list' which had been earlier adopted by the 'Convention for the Protection of the Marine Environment of the North-East Atlantic, 1992 (OSPAR)' whose contracting parties belonged to Western European and Other States Group. In recent years, the jurisdiction of London Protocol has been extended to protect and preserve the marine environment from all sources of pollution. This will make the United Nations Regional Group System play more important roles in the activities associated with the London Protocol. For this reason, this article has considered characteristics of the United Nations Regional Group System and has analyzed influences of this Regional Group System in meetings on the London Protocol. This could provide preliminary information for the Republic of Korea to give due consideration to the United Nations Regional Group System on the activities associated with the London Protocol.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.5-13
• /
• 2022

The current environmental problem is that environmental pollution is accelerating due to the generation of large amounts of waste and indiscriminate consumption of energy. Fossil fuels, a representative energy production fuel, are burned in the process of producing energy, generating a large amount of greenhouse gases and eventually causing climate change. In addition, the amount of waste generated worldwide is continuously increasing, and environmental pollution is occurring in the process of waste treatment. One of the methods for simultaneously solving these problems is the energy recovery from and reduction of organic wastes. Sewage sludge generated in sewage treatment plants has been treated in various ways since ocean disposal was completely prohibited, but the amount generated has been continuously increasing. Since the sewage sludge contains a large amount of organic materials, it is desirable to recover energy from the sewage sludge and reduce the final discharged waste through anaerobic digestion. However, most of the excess sludge is a mass of microorganisms used in sewage treatment, and in order for the excess sludge to be anaerobically digested, the cell walls of the microorganisms must be destroyed first, but it takes a lot of time to destroy the cell walls, so high rates of biogas production and waste reduction cannot be achieved only by anaerobic digestion. Therefore, the pre-treatment process of solubilizing excess sludge is required, and the thermal solubilization process is verified to be the most efficient among various solubilization methods, and high rates of biogas production and waste reduction can be achieved by anaerobic digestion after destroying cell walls the thermal solubilization process. In this study, when pretreating TS 10% thickened excess sludge through a thermal solubilization system, a study was conducted on solubilization characteristics according to retention time and operating temperature variables. The experimental variables for the retention time of the thermal solubilization system were 30 minutes, 60 minutes, 90 minutes, and 120 minutes, respectively, while the operating temperature was fixed at 160℃. The soulbilization rates calculated through TCOD and SCOD derived from the experimental results increased in the order of 12.11%, 20.52%, 28.62%, and 31.40%, respectively. And the variables according to operating temperature were 120℃, 140℃, 160℃, 180℃, and 200℃, respectively, while the operating retention time was fixed at 60 minutes. And the solubilization rates increased in the order of 7.14%, 14.52%, 20.52%, 40.72%, and 57.85%, respectively. In addition, TS, VS, T-N, T-P, NH₄⁺-N, and VFAs were analyzed to evaluate thermal solubilization characteristics of thickened excess sludge. As a result, in order to obtain 30% or more solubilization rate through thermal solubilization of TS 10% thickened excess sludge, 120 minutes of retention time is required when the operating temperature is fixed to 160℃, and 170℃ or more of operating temperature is needed when the operating time is fixed to 60 minutes.

• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.121-131
• /
• 2009

The distribution characteristics of heavy metals for surface sediments in east oceanic dumping area (EDA) and west oceanic dumping area (WDA) are evaluated by grain sizes, minerals, sedimentation rates and compositions of heavy metals. The mean grain sizes in EDA and WDA range from $7.95{\Phi}$ to $8.51{\Phi}$ and $7.42{\Phi}$ to $8.15{\Phi}$, respectively. These are mostly belonging to the M (mud) type. Minerals in the surface sediments consist of illite with chlorite, smectite, and kaolinite. Sedimentation rates estimated by $^{210}Pb$ method in EDA and WDA are 1.11 mm/yr$\sim$1.73 mm/yr and 1.87 mm/yr, respectively. According to the interrelationship, concentrations of Ni, Cu, Cr, and Zn are closely associated with mean grain size, Al, and Fe, whereas concentrations of Cd and Pb are poorly associated with ones. The enrichment factors of these elements are higher than 1.5, suggesting that the concentrations of Cd and Pb in the surface sediments are affected by anthropogenic sources. The $I_{geo}$-class numbers of Cd and Pb in the surface sediments are mostly classified in 2 to 4, showing moderate to strongly polluted. These numbers in EDA are higher than that of WDA, and the highest number is 4, indicative of the strongly polluted class. Our results show that the disposed wastes at EDA include mineralogical wastes, dredged materials from sewage disposals, and sludges from constructions having materials of WDA. The annual amount of oceanic dumping in EDA is double than that in WDA.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.132-141
• /
• 2010

Recently dredged material generation has a tendency to increase since harbor construction are under progress. In this study, an experiment had been carried out which replacement of dredged material of Busan and Ulsan port as concrete mixing material. For this experiment, physical and chemical test of dredged material was carried out, and compressive strength test of mortal specimen with dredged material in scale, as aggregate replacement, was carried out. Compressive strength of Busan and Ulsan was both increased when the ratio of mixing materials was 10%. Compressive strength of Dredged material from Busan with about 70% of mineral silt showed increse when the ratio of aggregate replacement in 30%. In addition, in the result of the ICP test, both dredged materials satisfied the waste's marine discharge treatment and soil contamination concern and measures criterion on that using dredged material as a concrete material can influence on application of concrete positively.

• Korean Chemical Engineering Research
• /
• v.62 no.1
• /
• pp.36-43
• /
• 2024

Fishing net waste (FNW) constitutes over half of all marine plastic waste and is a major contributor to the degradation of marine ecosystems. While current treatment options for FNW include incineration, landfilling, and mechanical recycling, these methods often result in low-value products and pollutant emissions. Importantly, FNWs, comprised of plastic polymers, can be converted into valuable resources like syngas and pyrolysis oil through pyrolysis. Thus, this study presents a process for generating high-purity hydrogen (H₂) by catalytically pyrolyzing FNW in a CO₂ environment. The proposed process comprises of three stages: First, the pretreated FNW undergoes Ni/SiO₂ catalytic pyrolysis under CO₂ conditions to produce syngas and pyrolysis oil. Second, the produced pyrolysis oil is incinerated and repurposed as an energy source for the pyrolysis reaction. Lastly, the syngas is transformed into high-purity H₂ via the Water-Gas-Shift (WGS) reaction and Pressure Swing Adsorption (PSA). This study compares the results of the proposed process with those of traditional pyrolysis conducted under N₂ conditions. Simulation results show that pyrolyzing 500 kg/h of FNW produced 2.933 kmol/h of high-purity H₂ under N₂ conditions and 3.605 kmol/h of high-purity H₂ under CO₂ conditions. Furthermore, pyrolysis under CO₂ conditions improved CO production, increasing H₂ output. Additionally, the CO₂ emissions were reduced by 89.8% compared to N₂ conditions due to the capture and utilization of CO₂ released during the process. Therefore, the proposed process under CO₂ conditions can efficiently recycle FNW and generate eco-friendly hydrogen product.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.247-247
• /
• 2010

본 연구는 주류 제조과정에서 발생하는 생전분발효 부산물을 펠릿(pellet)연료로 전환하는 과정에서 효율적인 방법에 대해 기술한다. 술을 정제하는 과정에서 발생하는 주박을 펠릿화하고 재생청정에너지인 폐자원의 효율성을 높이기 위한 방법을 제안한다. 술을 정제하고 남은 지게미를 주박(酒粕, 술지게미)이라 하고 흔히 부드러운 것을 단단하게 뭉친 알갱이를 펠릿이라 한다. 현재 펠릿화는 폐목재를 분쇄후 성형, 가공하여 목재펠릿을 만들어 상용화하고 있다. 목재펠릿은 성형, 가공하는데 비용이 주박보다 많이 들고 열량도 더 낮음을 확인하였다. 목재소에서 나온 나무(톱밥)와 주박을 열량측정기를 이용하여 측정한 결과로 나무는 약 1850 Kcal이고 주박은 약 1989 Kcal가 측정되었다. 나무는 일반 목재소 세 곳에서 채취한 것이고 주박은 막걸리, 약주 및 청주의 술지게미를 실험에 사용한다. 주류업체에서도 술을 정제하고 남은 주박을 처리하는데 많은 곤란과 비용이 든다. 또한 주박을 해양에 투척하여 처리해 왔으나 2012년부터 해양투기가 금지되어 더욱 처리에 곤란을 겪게 된다. 최근 주박을 토양개량제(비료)로 개발하여 사용하기도 하나 본 연구에서 제안하는 장점은 농산물을 재배해서 주류제조시 발생되는 주박을 펠릿화하여 연료로 사용하고 남은 재를 토양개량제로 사용하는 장점이 있다. 제품의 전체 라이프 사이클을 통해 환경으로 방출되는 모든 것을 가능한 한 0(zero)으로 하는 활동인 제로-이미션(zero-emision)이 된다. 이는 단순히 배출량만을 줄이는 것이 아니라 폐기물을 유용한 자원으로 활용한다는 측면이 가장 큰 이점이 된다. 주박의 효율성을 높이기 위해 주박을 종류별로 주박과 목재를 섞는 방법으로 열량을 측정하였다. 먼저 열량이 높은 순서로 막걸리 주박과 약주 주박의 비율을 1:1, 1:0.5, 1:0.2, 두 번째 막걸리 주박과 청주 주박의 비율을 1:1, 1:0.5, 1:0.2, 세 번째 막걸리 주박과 나무 톱밥의 비율을 1:1, 1:0.5, 1:0.2로 섞어서 열량을 측정하였다. 열량이 높은 순서는 세 번째(2015Kcal), 두 번째(1995Kcal), 첫 번째(1868Kcal)의 순이었다. 가장 열량이 높은 막걸리 주박과 나무 톱밥을 섞은 것이 가장 효율성이 높다. 주박 펠릿의 장점은 친환경적인 소재이고 지속적으로 재생이 가능한 에너지원이다. 더욱이 주박 펠릿은 발열량이 높고 다른 바이오매스 원료에 비해 청정하다는 큰 장점을 지니고 있다. 또한 사용에 소요되는 유지 관리비용을 최소화할 수 있고 자동화가 가능하여 사용에 편리하다. 가격면에서 화석연료에 비해 안정적이고 체적 또한 작아 이송의 큰 장점을 가지고 있다. 현재 펠릿의 경우는 목재펠릿이 제품화되어 있지만 주박을 이용하여 제품의 펠릿화를 통한 연료원으로 사용하는 경우는 전 세계 전무한 상태로 폐자원을 재사용하는 효율성이 제시된다. 향후 과제로 주박을 이용한 펠릿 연료원의 기술이 개발되고 기계적인 시스템을 개발하면 저탄소 녹색성장 신재생에너지 연료의 획기적인 미래형 에너지시스템이 될 것이다.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.1-17
• /
• 2018

Related incidents and accidents are frequent after 2000 years, such as the outbreak of the Taian peninsula crude oil spillage and Gumi hydrofluoric acid leakage accident. In the wake of such environmental pollution accidents, Consensus has been formed to enact legislation on liability for the compensation of environmental pollution in 2014 and the rescue, and has been in force since January 2016. Therefore, in the domestic insurance industry, the introduced environmental liability insurance system needs to be managed through the standardization formula of a new insurance model for managing the environmental risk. This study has been carried out by the emergence of a safe insurance model with a risky nature of the risk type, which is one of the services of the knowledge base. The verification of the six assurance media on the occurrence of environmental pollution such as chemical, waste, marine, soil, etc. is expressed through semantic interoperability through this possible ontology. The insurance model was designed and presented by deducing the relationship between the amount of money and the amount of money that was written in the area of existing expertise, In order to exclude the possible consequences, the concept of abstract is conceptualized in the form of a customer, and a plan for the future development of an ontology-based decision support system is proposed to reduce the cost and resources consumed every year. It is expected that standardization of the verification standard of the mass of mass will minimize errors and reduce the time and resources required for verification.