• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.4
• /
• pp.529-537
• /
• 1998

Currently as due to the rapid development of industry and increase in population we meet serious problems concerning the shortage and pollution of water. In the country many experts predict a shortage of water approaching 450 million tons by the year 2006. To cope with this serious problem it is necessary to construct desalination plants. In the adoption of a desalination system the most important factor is the cost of fresh water production,. In general LNG is stored in a tank as a liquid state below $-162^{\circ}C$. When it is serviced, however the LNG absorbs energy from a heat source and transforms to a high pressure gaseous state. During this process a huge amount of cold energy accumulated in cooling LNG is wasted. This wasted cold energy can be utilized to produce fresh water by using a sea water freezing desalination system. In order to develop a sea water freezing desalination system and to establish its design technique qualitative and quantitative data regarding the freezing behavior of sea water is required in advance, The goals of this study are to reveal the freezing behavior of sea water is required in advance. The goals of this study are to reveal the freezing mechanisms of sea water to measure the freezing rate and to investigate the freezing heat-transfer characteristics,. The experimental results will provide a general understanding of sea water freezing behavior in a rectangular vessel cooled from above.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.5
• /
• pp.592-598
• /
• 2007

The fuel charge is getting higher in navigation cost. Therefore, shipowners try to find the method for reducing oil consumption. ESS(Energy Saving System) is one of he method. ESS is the system consisted with two inverters, ESS control unit and monitoring system. Two inverters control two main sea water cooling pumps. In the ESS control Unit, the control algorithm finds optimized point to decrease a power consumption of main sea water cooling pumps. Monitoring system observes ESS not to work improperly. ESS is experimented in the laboratory with real condition and analyzed in every view. After experiment, the result of the experiment shows that the control algorithm works correctly and safely. ESS has a plan to be operated in the ship soon. In that case, additional devices are needed to connect ESS with cooling system of the vessel. So the development of addition device is needed and being studied.

• 한국해양학회지
• /
• v.27 no.4
• /
• pp.324-331
• /
• 1992

Water masses and circulations around Korean peninsula are briefly described based on recent studies. The results of theses studies are discussed from the physical point of view. Oceanic conditions in this region are largely due to the roles played by the Tsushima Warm Current, an onshore extension of the Kuroshio, and local conditions such as wind, surface heat flux and fresh water input etc. To the south and west of Korea, the northern/western border of the Tsushima Warm Current Water is roughly the line joining Taiwan and Cheju island. In summer, it is affected by large amount of fresh water discharged from the Changjiang and in winter, an intrusion of this water into the Yellow Sea is induced by the prevailing northwesterly monsoon wind. To the east of Korea, the Tsushima Warm Current Water presents roughly south of the line joining the wast coast of Korea near 37-38$^{\circ}$N and Tsugaru-Soya Straits in the northern Japan. But this situation, together with those in deeper layers, may greatly be changed by winter atmospheric conditions (wind and surface heat flux). The seas around Korea are not yet physically well understood and many problems wait physical explanations. Some problems, along with personal views of them, are mentioned.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2012.06a
• /
• pp.173-173
• /
• 2012

Duplex STS는 응력부식 저항이 큰 페라이트상과 우수한 내식성을 제공하는 오스테나이트상이 미세하게 1:1로 결합하여 강도가 오스테나이트 STS 보다 최소 1.7배 이상 높을 뿐 아니라 공식(pitting)과 응력부식 저항성이 우수해 최근에 주목받고 있는 고내식 고강도 재료이다. STS의 내식성을 평가하는 여러 지수 중 Pitting에 대한 내식성을 평가하는 지수로서 PREN (Pitting Resistance Equivalent Number)이 있다. PREN =%Cr + 3.3%(Mo + 0.5%W) + 16%N PREN이 30 이상이면 해안지역에서 사용가능하나, PREN이 40 이상인 경우에는 원자력발전소, 탈황 설비, 해수설비 및 화학Plant 등 고내식 환경에서 주로 사용가능하다. PREN이 40 이상인 Super Duplex STS은 다량의 Mo와 N을 첨가하여 만든 제품으로, 최근 10여 년 동안 해수 냉각 설비, 해수 담수화 설비, 탈황 설비, 석유화학 설비 및 원전용 CASK 등의 다양한 분야에 그 사용량이 꾸준히 증가하고 있는 상황이다. 본 연구에서는 Super Duplex STS의 TIG용접에서 실드가스 중의 $N_2$의 첨가가 PREN에 미치는 영향을 검토하였다. 실드가스 중 $N_2$가 용접금속으로 침입하는 메커니즘을 규명하고, 용접조건 변화에 따른 용접금속 내 N의 함량을 측정하여 PREN을 계산하고, 용접금속의 기계적 특성과 미세조직을 검토하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.2189-2196
• /
• 2015

According to increase environmental pollutions and fuel costs, The study of energy saving in the ship is proceeding actively. PCS is pump control system for cooling system in the ship to improve the energy efficiency by controling rotation speed of sea water pump, fresh water pump and position of 3way valve. In this paper, we develop the PCS simulator that has an environment similar to the cooling system of the actual vessel to ensure reliability of the PCS. Also, PC-based control and data storage system for PCS simulator is developed. To develop this system, National Instrument's cDAQ and LabVIEW are used. Finally, confirm the behavior of the simulator by analyzing the saving data.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.168-178
• /
• 2006

In recent years, an ingress of mass jellyfish into cooling water intake system causes interruption of electric power production at the Uljin nuclear power plant. Therefore, monitering and forecast on the mass ingress of marine organisms are demanded as one of the early preventing measurements. Sea water movement is a major factor on the ingress of marine organisms like Moon jellyfish which has weak self-mobile ability. When sea surface flow direction adjacent to the Uljin is the northwest, the jellyfish on the Tsushima warm currents move to the Uljin power plant. To detect the direction of sea surface warm flows, the spatial range with $25km{\times}25km$ is set up and NOAA sea surface temperature(SST) data are collected in this area. For the statistical analysis, the SST data are made as GIS point data and geostatistical analysis of ArcGIS is used. Analyzing directional semivariogram, the anisotropy of the SST point data are calculated and warm flow direction is detected. This experimental results are expected to use as an element technology for the early warning system development of mass jellyfish ingress in power plant.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.400-406
• /
• 2017

The model used in this study was reversed to analyze the cause of excessive damage that occurred inside the rotating system and pipe system of a centrifugal-type seawater pump on a ship. For this purpose, internal flow analysis on a cooling seawater pump was performed using CFD. As a result, the shape and boundary conditions of the target pump were set by reverse engineering, and pump efficiency at a design operating point of $125m^3/h$ was calculated as 85.3 % with a head of 32.0 m. The maximum efficiency point of the target pump was estimated to be 86.2 % at $150m^3/h$, but this differed from the actual operating point. At $112.5m^3/h$, which was the lowest flow point, flow was unstable due to the characteristics of the low flow point and analysis convergence was not good. The purpose of this study was to clarify the cause of ongoing cavitation in seawater pumps and piping systems in operation. Future research will be needed to clarify causes for pipe systems in the future by performing calculations for the total piping system of an inlet and outlet, in addition to measuring the flow rate of each branch pipe.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1157-1163
• /
• 2008

Fuel represents a significant portion of the operating costs of voyages of the vessel. Under this situation, dramatic increase in fuel price caused a problem that earnings of ship becomes decreased seriously. Pumps in a cooling system of the vessel are often operated inefficiently. The reasons will vary from process to process and application to application. Inefficiency of pumps is one of the reason for making the cost of operating the vessel increased. This paper suggests energy-effective cooling system that controls sea water pumps with inverters to reduce energy consumption in vessel by conducting simulation with LabVIEW. Results shows that electric energy consumption of pumps are significantly deceased. If this energy-effective cooling system is applied to other systems which need cooling, it could be useful in reducing electric energy wastage.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.1
• /
• pp.60-64
• /
• 1999

The objective of this study was to manufacture the sea water cooling apparatus for fish hold storage to extend the freshness of fish. Using the sea water cooling apparatus manufactured, it makes observations on the physicochemical and sensual properties of mackerel such as ATP and its related compounds, K-value, VBN, TMA, TBA, salt-concentration and skin color through storage. The results of this investigation showed that the values of physicochemical properties such as ATP and its related compounds, K-value, VBN, TMA, TBA increased gradually during storage in sea water cooling apparatus manufactured and the changes of skin color was inhibited also. From these results, it could be suggested that developed sea water cooling apparatus is effective in shelf-life extension of fishes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.2
• /
• pp.137-147
• /
• 2004

Sea surface cooling (SSC) with the passage of typhoons is examined in the East Sea using the Japan Meteorological Agency buoy data $(37^{\circ}45'N,\;134^{\circ}23'E)$ during 1983-2000 and a three-dimensional primitive equation model (the Princeton Ocean Model). Forty typhoons in this period induced the SST decrease ranging from about $-0.5^{\circ}C\;to\;-4.3^{\circ}C.$ Intense SSC $(<-2^{\circ}C)$ occurs with typhoons that passed mainly through the left-hand side of the buoy station. The model is implemented to examine a physical process of SSC with a typical-track typhoon in the northwestern Pacific $(24^{\circ}N\;to\;52^{\circ}N).$ The model well reproduces prominent features in the observation and addresses how it happens; SSC is induced mainly by momentum mixing effect stirred with the typhoon rather than upwelling.