• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.285-295
• /
• 2020

In the case of small observation towers located at sea, it is necessary to confirm the change in dynamic characteristics due to the influence of environmental loads. In this study, the dynamic characteristics were analyzed and the numerical analysis model was designed through field dynamic response measurement on the Mangyeong Offshore Observation Tower (Mangyeong Tower) located near the Saemangeum Embankment. As a result of the measurement, the natural frequency was found to increase slowly as the tide level is lowered. In addition, it was confirmed that the same mode has two frequencies, which was judged to be a phenomenon in which the natural frequency was partially increased when the pile and the ground contacted by scouring. For numerical analysis, the upper mass, artificial fixity point, scour depth and fluid influences are reflected in the structural characteristics of the Mangyeong Tower. In addition, the model updating from the estimated natural frequency and pattern search algorithm was performed. From the model updating, it is expected that it can be applied to future studies on stability of Mangyeong Tower.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.603-612
• /
• 2017

Accidents associated with hazardous materials, including oil and HNS, in maritime transportation show increasing trend. Therefore, preventive countermeasures for such accidents should be provided. The purpose of this study is to analyze level of risk on human loss and potential damage to environment, using data on domestic marine accidents carrying hazardous materials (2002~2014), and identify high-risk accident types for urgent risk management which needs findings of accident causes and proper mitigation measures. High-risks on human loss are explosion and suffocation, occurred in process of ship maintenance and tank cleaning. On the other hand, high-risk on environmental damage is spill caused by ship accidents (collision, grounding and etc.). Especially, spill occurs during loading operation of oil and HNS onboard a ship. Strict operation supervision/management and safety education/training on a regular basis could prevent accidents, because human factors such as not wearing safety gear and careless cargo handling cause most of the marine accidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.19-29
• /
• 2022

The result of a questionnaire survey conducted on fishermen using coastal fish traps shows that fall accidents during trap dropping and pulling constitute the highest proportion of accidents at 42.1 %, whereas slipping accidents on the deck or stricture accidents to the body due to the trap winding device constitute 21.1 % each. In addition, 53.2 % of all surveyed subjects responded that trap pulling is the most dangerous task, followed by fish sorting 33.8 %, and trap dropping 9.1 %. As for the main items requested by fishermen for improving the trap winding device, 36.8 % indicated a method to easily lift the trap from the water to the work deck, and 31.6 % indicated a method to overcome the rope tension and prevent slip when pulling the trap to reduce the accidents. The small trap fishing vessel winding device proposed herein can increase the winding force by strengthening the rope contact area and friction coefficient via an appropriate contact angle between the driving roller of the winding device and the rope. When the contact angles between the driving roller and the rope are 1°, 5°, 9°, 14° and 19°, the rope tension showed a difference according to each contact angle. When the contact angle is 9°, the rope tension is the highest at 392.62 kgf. Based on these experimental results, a prototype winding device is manufactured, and 25 traps are installed on a rope with a total length of 100 m at 4 m intervals in the sea, and then the rope tension is measured during trap pulling. As a result, the rope tension increases rapidly at the initial stage of trap pulling and shows the highest value of 31.89 kgf, which subsequently decreases significantly. Therefore, it is appropriate to design the winding force of a small trap fishing vessel winding device based on the maximum tension value of the rope specified at the beginning of the trap pulling operation.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.357-361
• /
• 2012

Anemometer is a meteorological instrument that measures wind direction and wind speed in real time, and is mounted to the cranes that are used at ports, shipbuilding yards, off-shore structure, or construction sites that are influenced by wind, and it is used in conjunction with the safety system. Load cell-type anemometer measures the wind direction through the ratio of load between 4 positions by mounting the thin plate to 4 load cells, and measures wind velocity through the summation of loads. In this study, we compared and analyzed the results in the theoretic approach, analytic approach and experimental approach to derive the correlation between load ratio and wind direction. Wind direction was selected as the design variable, and selected 9 wind direction conditions from $0^{\circ}{\sim}90^{\circ}$ with $11.25^{\circ}$ space for analysis, and 10 wind direction conditions with $10^{\circ}$ space for experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.455-455
• /
• 2016

최근 기후변화로 빈번하게 발생하는 국지성 집중호우로 인해 홍수 피해가 증가하고 있으며, 이에 따라 유량 계측 자료의 필요성이 더욱 증대되고 있다. 현재까지 하천의 홍수 유량측정은 대부분 부자법에 의해 수행되어 왔지만, 측정 작업의 위험성이나 측정 정확도에 대해 여러 문제점이 지적되고 있다. 이에 비접촉식 측정 방법으로 안전하고 측정방식이 간편하며 높은 정확도를 갖춘 표면영상유속측정법(Surface Image Velocimetry, SIV)에 대한 연구가 활발하게 진행되고 있다. 다만 표면영상유속측정법의 경우 질 좋은 영상 촬영을 위해 밝은 빛이 필요하고, 일반적으로 매우 작은 규모의 하천을 제외하고는 영상 획득이 어렵다는 한계가 있다. 이와 같은 문제들을 해결하기 위해 최근 류권규 등(2015)은 영상 획득 장비로 원적외선 카메라의 적용성을 검토한 바 있다. 원적외선 카메라의 경우 별도의 조명을 필요로 하지 않기 때문에 주야간 구분 없이 사용 가능하다는 장점이 있으며 실제 하천에서 홍수와 함께 발생하는 안개의 영향 또한 받지 않아 고정식으로 설치하여 하천 유량측정 시스템을 구성하는 좋은 대안이 될 수 있음을 강조하였다. 다만, 원적외선 카메라는 야간에 적용시 주간과 비교하여 수표면의 움직임이 느리게 분석되는 경향이 있다고 하였다. 실험 결과를 보면, 소형 프로펠러 유속계로 측정한 수표면의 유속값에 비교하여 일반 캠코더 영상으로 산정한 유속 산정 결과의 상대오차는 최대 -10%인 반면, 원적외선 카메라 영상으로 산정한 유속 산정 결과의 오차는 -9%에서 -19%(주간), -10% 에서 -23%까지의 오차 범위를 나타내는 등 일반 캠코더에 비해 원적외선 카메라의 정확도가 다소 떨어지는 결과를 나타냈으며, 이러한 문제를 해결하기 위해서는 원적외선 영상의 명암값 분포 차이를 해결하기 위해 영상 처리 기법에 대한 추가적인 연구가 필요할 것이라고 하였다. 이에 본 연구에서는 원적외선 영상에 대한 다양한 영상 개선을 통해 표면영상유속계의 유속 측정 정확도를 높이고자 하였다. 이를 위해 우선, 적정 해상도와 시간간격을 제시하였으며, 영상의 색 보정과 영상 강화 등의 영상 개선을 통해 원적외선 영상을 이용한 유속 산정 정확도를 향상하였고, 마지막으로 다양한 야간 하천 흐름 조건에 적용하여 원적외선 영상을 활용한 표면영상유속계의 유속 측정 정확도를 높이고자 하였다.

• Journal of Space Technology and Applications
• /
• v.2 no.2
• /
• pp.121-136
• /
• 2022

Automatic Identification System used in ship communication is required for marine control way, including monitoring of vessel operation in coastal and exchanging of information for safety navigation between them. But, it uses a very high frequency band of approximately 160 MHz, and at the same time, due to the curvature of Earth, there is a limit to the communication distance. Several demonstrations were made successfully over satellite, but not much work has been done yet through cube-satellite which has low-orbit at 500 km altitude. Here, we demonstrate a reception test of AIS (automatic identification system) receiver for a cube-satellites using software-defined radio (SDR). We collected AIS data from ship at port of Busan, Korea, using R8202T2 SDR and established to transmit them using Adam-Pluto and Matlab Simulink. The process of weakening the signal strength to a satellite was constructed using attenuator. Through above process, we demonstrated whether AIS data was successfully received from the AIS payload.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.927-935
• /
• 2019

Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.275-281
• /
• 2013

Ship Standard Network was submitted as a common subject of e-navigation by 81th IMO MSC 2005. This agenda was given an official status with strategy planning of e-navigation for Ship Standard Network after approval of WG program of 81th MSC 2006. Nowadays approximately 400 heterogeneous navigation and communication equipments are working on ships at sea. Standardization of ship network is to support exchanging various data efficiently. Among them, 4S network is defined as a wireless communication network between ship to ship and ship to shore which provides unceasing communication channel ship to shore. It has been expected to trigger various services and applications based on 4S network. However, no technologies and products has been appeared at fields yet. but now there's not specific technologies and developing products. In this paper, We developed a 4S multiple media switching server and a ship-land information exchange system to overcome the heterogeneity and provide efficient communication environments.. The performance of the implemented system was verified by TTA(Telecommunications Technology Association) V&V(Verification and Validation).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.31-38
• /
• 2020

The characteristics of ship traffic routes and the long term fluctuation in marine traf ic volume of the incoming and outgoing routes of the Yeosu Gwangyang Port were analyzed using vessel traffic data from the past 22 years and a real-time vessel traffic volume survey performed for 72 hours per year, for three years, between 2015 and 2017. As of 2017, the number of vessels passing through Yeosu Gwangyang Port was about 66,000 and the total tonnage of these ships was about 804,564 thousand tons, which is a 400 % increase from the 189,906 thousand tons shipped in 1996. Specifically, the dangerous cargo volume was 140,000 thousand tons, which is a 250 % increase compared to 1996. According to the real-time vessel traffic volume survey, the average daily number of vessels was 357, and traf ic route utilization rates were 28.1 % in the Nakpo sea area, 43.8 % in the specified sea area, and the coastal area traf ic route, Dolsan coastal area, and Kumhodo sea area showed the same rate of 6.8 %. Many routes meet in the Nakpo sea area and, parallel and cross passing were frequent. Many small work vessels entered the specific sea area from the neighboring coastal area traffic route and frequently intersected the path of larger vessels. The anchorage waiting rate for cargo ships was about 24 %, and the nightly passing rate for dangerous cargo ships such as chemical vessels and tankers was about 20 %. Although the vessel traffic volume of Yeosu Gwangyang Port increases every year, the vessel traffic routes remain the same. Therefore, the risk of accidents is constantly increasing. The route conditions must be improved by dredging and expanding the available routes to reduce the high risk of ship accidents due to overlapping routes, by removing reefs, and by reinforcing navigational aids. In addition, the entry and exit time for dangerous cargo ships at high-risk ports must be strictly regulated. Advancements in the VTS system can help to actively manage the traffic of small vessels using the coastal area traffic route.

• Journal of Navigation and Port Research
• /
• v.32 no.1
• /
• pp.103-108
• /
• 2008

In the maritime universities, cadets of deck part should practice on board training using training ships of university or merchant vessels of company for 1 year according to STCW Convention. For training period, trainees are educated many education items as to positioning ability, chart work ability, vessel operation ability and cargo operation ability etc. Among many abilities, vessel avoiding ability which is demanded as a basic ability for deck officer can't be gained easily, because avoiding maneuver of ship controlled by cadets is not allowable regally and encounter situations occur randomly. This paper investigated CPA to the various encounter types with other vessels during the ocean going navigation of T.S Hannara. We analysis danger degree per each encounter type, and proposed a basic material of efficient training education about proper look-out and avoiding maneuver.