• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.2
• /
• pp.19-45
• /
• 2009

The purpose of this paper is to research the contents and issues of the draft legislation of Part VI the Carriage by Act of Korean Commercial Code in respect of the liability of the carrier in the carriage of cargo by air, comparing to the related provisions of the Montreal Convention of 1999. The Montreal Convention in respect of the international carriage by air was adopted in 1999, and Korea has ratified the Montreal Convention in 2007. However, there is now no national legislation in respect of the carriage by air in Korea. Thus, the Ministry of Justice has prepared the draft legislation of Part VI the Carriage by Air of the Korean Commercial Code in July 2008, and the draft legislation is now being reviewed by the National Assembly. The draft provisions of Part VI the Carriage by Air are basically adopting most of the related provisions of the Montreal Convention in respect of the carriage of cargo by air and some draft provisions are applying the related provisions of the Korean Commercial Code in respect of the carriage of cargo by land and sea. In respect of the liability of the carrier in the carriage of cargo by air, the contents of the draft legislation of Part VI the Carriage by air are composed of the provisions in respect of the cause of the liability of the and the application for the non-contractual claim, the limit of liability, the exoneration from liability, the extinguishment of liability, the notice of damage to cargo, the liability of the agents and servants of the carrier, and the liability of the actual carrier and successive carrier. The draft legislation of the Carriage by Air of Korean Commercial Code is different from the provisions of the Montreal Convention is respect of the liability of the carrier in the carriage of cargo by air as follows : the draft Article 913 paragraph 1 provides additionally the riot, civil war and quarantine as the exoneration causes from the liability for damage to the cargo of the carrier in the Article 18 paragraph 2 of the Montreal Convention. In respect of the liability of the carrier in carriage of cargo by air, the draft legislation of Part VI the Carriage by Air does not provide the settlement by arbitration of dispute relating to the liability of the carrier and the requirement of adequate insurance covering the liability of the carrier which are provided in the Montreal Convention. In author's opinion, it is desirable that the above mentioned provisions such as the arbitration and the insurance shall be inserted into the draft legislation of the Carriage by Air of Korean Commercial Code. In conclusion, the legislation of Part VI the Carriage by Air of the Korean Commercial Code shall be made by the National Assembly as soon as possible for the smooth and equitable compensation for damage to cargo arising during the carriage by air.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.56-60
• /
• 2009

Purpose: The various studies and efforts to develop program are in progress in the field of nuclear medicine for the purpose of reducing scan time. The Oncoflash is one of the programs used in whole body bone scan which allows to maintain the image quality while to reduce scan time. When Those applications are used in clinical setting, both the image quality and reduction of scan time should be considered, therefore, the purpose of this study was to determine the criteria for proper scan speed. Materials and Methods: The subjects of this study were the patients who underwent whole body bone scan at the departments of nuclear medicine in the Asan Medical Center located in Seoul from 1st to 10th, July, 2008. The whole body bone images obtained in the scan speed of 30cm/min were classified by the total counts into under 800 K, and over 800 K, 900 K, 1,000 K, 1,500 K, and 2,000 K. The image quality were assessed qualitatively and the percentages of those of 1,000K and under of total counts were calculated. The FWHM before and after applying the Oncoflash were analyzed using images obtained in $^{99m}Tc$ Flood and 4-Quadrant bar phantom in order to compare the resolution according to the amount of total counts by the application of the Oncoflash. Considering the counts of the whole body bone scan, the dosed 2~5 mCi were used. 152 patients underwent the measurement in which the counts of Patient Postioning Monitor (PPM) were measured with including head and the parts of chest which the starting point of whole body bone scan from 7th to 26th, August, 2008. The correlations with total counts obtained in the scan speed of 30cm/min among them were analyzed (The exclusion criteria were after over six hours of applying isotopes or low amount of doses). Results: The percentage of the whole body bone image which has the geometric average of total counts of under 1,000K among them obtained in the scan speed of 30cm/min were 17.6%(n=58) of 329 patients. The qualitative analysis of the image groups according to the whole body counts showed that the images of under 1,000K were assessed to have coarse particles and increased noises. The analysis on the FWHM of the images before and after applying the Oncoflash showed that, in the case of PPM counts of under 3.6 K, FWHM values after applying the Oncoflash were higher than that before applying the Oncoflash, whereas, in the case of that of over 3.6 K, the FWHM after applying the Oncoflash were not higher than that before applying the Oncoflash. The average of total counts at 2.5~3.0 K, 3.1~3.5 K, 3.6~4.0 k, 4.1~4.5 K, 4.6~5.0 K, 5.1~6.0 K, 6.1~7.0 K, and 7.1 K over (in PPM) were $965{\pm}173\;K$, $1084{\pm}154\;K$, $1242{\pm}186\;K$, $1359{\pm}170\;K$, $1405{\pm}184\;K$, $1640{\pm}376\;K$, $1,771{\pm}324\;K$, and $1,972{\pm}385\;K$, respectively and the correlations between the counts in PPM and the total counts of image obtained in the scan speed of 30 cm/min demonstrated strong correlation (r=.775, p<.01). Conclusions: In the case of PPM coefficient over 3.6 K, the image quality obtained in the scan speed of 30cm/min and after applying the Oncoflash was similar to that obtained in the scan speed of 15 cm/min. In the case of total counts over 1,000 K, it is expected to reduce scan time without any damage on the image quality. In the case of total counts under 1,000 K, however, the image quality were decreased even though the Oncoflash is applied, so it is recommended to perform the re-image in the scan speed of 15 cm/min.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2004

Purpose: NEMA NU2-2001 was proposed as a new standard for performance evaluation of whole body PET scanners. in this study, system performance of Siemens CTI ECAT EXACT 47 PET scanner including spatial resolution, sensitivity, scatter fraction, and count rate performance in 2D and 3D mode was evaluated using this new standard method. Methods: ECAT EXACT 47 is a BGO crystal based PET scanner and covers an axial field of view (FOV) of 16.2 cm. Retractable septa allow 2D and 3D data acquisition. All the PET data were acquired according to the NEMA NU2-2001 protocols (coincidence window: 12 ns, energy window: $250{\sim}650$ keV). For the spatial resolution measurement, F-18 point source was placed at the center of the axial FOV((a) x=0, and y=1, (b)x=0, and y=10, (c)x=70, and y=0cm) and a position one fourth of the axial FOV from the center ((a) x=0, and y=1, (b)x=0, and y=10, (c)x=10, and y=0cm). In this case, x and y are transaxial horizontal and vertical, and z is the scanner's axial direction. Images were reconstructed using FBP with ramp filter without any post processing. To measure the system sensitivity, NEMA sensitivity phantom filled with F-18 solution and surrounded by $1{\sim}5$ aluminum sleeves were scanned at the center of transaxial FOV and 10 cm offset from the center. Attenuation free values of sensitivity wire estimated by extrapolating data to the zero wall thickness. NEMA scatter phantom with length of 70 cm was filled with F-18 or C-11solution (2D: 2,900 MBq, 3D: 407 MBq), and coincidence count rates wire measured for 7 half-lives to obtain noise equivalent count rate (MECR) and scatter fraction. We confirmed that dead time loss of the last flame were below 1%. Scatter fraction was estimated by averaging the true to background (staffer+random) ratios of last 3 frames in which the fractions of random rate art negligibly small. Results: Axial and transverse resolutions at 1cm offset from the center were 0.62 and 0.66 cm (FBP in 2D and 3D), and 0.67 and 0.69 cm (FBP in 2D and 3D). Axial, transverse radial, and transverse tangential resolutions at 10cm offset from the center were 0.72 and 0.68 cm (FBP in 2D and 3D), 0.63 and 0.66 cm (FBP in 2D and 3D), and 0.72 and 0.66 cm (FBP in 2D and 3D). Sensitivity values were 708.6 (2D), 2931.3 (3D) counts/sec/MBq at the center and 728.7 (2D, 3398.2 (3D) counts/sec/MBq at 10 cm offset from the center. Scatter fractions were 0.19 (2D) and 0.49 (3D). Peak true count rate and NECR were 64.0 kcps at 40.1 kBq/mL and 49.6 kcps at 40.1 kBq/mL in 2D and 53.7 kcps at 4.76 kBq/mL and 26.4 kcps at 4.47 kBq/mL in 3D. Conclusion: Information about the performance of CTI ECAT EXACT 47 PET scanner reported in this study will be useful for the quantitative analysis of data and determination of optimal image acquisition protocols using this widely used scanner for clinical and research purposes.

• Journal of Aquaculture
• /
• v.11 no.4
• /
• pp.529-546
• /
• 1998

Gonadal part that developed by indifferentiation period for 6 months after hatching is made as gonad and fat body. These gonad are thin semi-transparant and undistinguished germ cell. Germinal epithelium is distinguished by development of gonad epithelial tissue from 7 months after hatching. Sex differentiation is begun by oogonia develoment at 8 months after hatching. Primary oocytes grow over germinal epithelium of gonadal cavity, at 9 months after hatching, gonadal cavity become ovarian cavity as they increasing. As soon as oocytes at 13 months after hatching are filled with the whole part of gonad, degeneration of oocyte is begun. And then, gonad has cavity tissue, a small number of oocyte are located in gonadal cavity. At 15 months after hatching, new primary oocyte develop and cavity of ovarian tissue in the central of ovarian cavity. Spermatogonia multiplicate and cavity tissue consist of testicular tissue. These gonad become hermaphrodite and then ditermine the sex of female and male. These results show the red sea bream is juvenile hermaphrodite and undif-ferentiated gonochoristic teleost. Male and female differentiation type of gonad is divided in undifferentiation stage, oogonia-like stage, ovary-like stage, ovary development stage, hermaphroditic testis stage, hermaphroditic ovary stage, and testis development stage. Undifferentiation stage is continued total lenth 18cm at 13 months after hatching. ovary-like stage is continued total length 11~18cm at 13 months after hatching. Ovary-like stage is continued total length 14~26cm at 10~14 months after hatching. Ovary development stage begins from total length 20cm, 14 months after hatching. At 20 months after hatching, 44 percent of total sampled individuals had ovary. Hermaphroditic ovary stage first begins total length 19~20 cm at 15 months after hatching, but it is not observed total length 28~29cm at 20months after hatching. Hermaphroditic testis stage first begins total length 21~22cm at 20months after hatching and is continued for 20months. Testis development stage first begins total length 20~21cm at 20 months after hatching, and is occupied 33 percent total length 28~29cm at 20 months. The beginning of sex differentiation more than 50 percent is from total length 16cm at 11 months after hatching. Sex determination begins total length 20cm, 14months after hatching in female and total length 20cm, 15 months after hatching in male. Sex determination more than 50 percent begins total length 23cm,, 17 months after hatching. Undifferentiated gonadal part of red sea bream consist gonad and fat body. As differentiation is going on and gonad is growing, fat body shrinks. This appearence is showed the same tendency in 3-year old red sea bream. 1.9mm larvae after hatching grow about 19mm larvae for 47 days. The relationship between the total length and body weight of larvae and juveniles in $BW=4.45{\times}10^{-6}TL^{3.4718}$ r=0.9820. Fishes in cage culture grow to maximum total length 28.4cm. The relationship between the total length and body weight of these fishes is $BW=2.36{\times}10^{-2}TL^{2.9180}$, r=0.9971. Undifferentiated gonadal part of red sea bream consist gonad and fat body. As differentiation is going on and gonad is growing, fat body shrinks.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.2
• /
• pp.139-161
• /
• 1998

This thesis includes a study on the legal regulation, the system and formalities on the control of illegal fishing. And the author analyzed the details of the lists of illegal fishing controlled by fishing patrol vessels of Ministry of Maritime Affairs and Fisheries from 1994 to 1996 in adjacent sea area of Korea. The results are summarized as follows ; 1. The fishing patrol vessels controlled total 826 cases in 2,726 days of 292 voyages by 17 vessels in 1994, total 1,086 cases in 3,060 days of 333 voyages by 18 vessels in 1995 and total 933 cases in 3,126 days of 330 voyages by 19 vessels in 1996. 2. The fishing period of illegal fishing was generally concentrated from April to September. But year after year, illegal fishing was scattered throughout the year. 3. The most controlled sea area of illegal fishing was the south central sea area in the sea near Port of Tongyeong. The sea area occupied about 36~51% of totality and the controlled cases were gradually increased every year. The second was the south western sea area in the sea near Port of Yosu. The sea area occupied about 18-27% and the controlled cases were a little bit increased every year. The third was the south eastern sea area in the sea near Pusan. The sea area occupied about 13~23% and the controlled cases were gradually decreased year by year. 4. The most controlled kind of illegal fishing was the small size bottom trawl. This occupied about 81-95% of totality and the controlled cases were gradually increased year by year. The second was the medium size bottom trawl. This occupied about 4-7% and the controlled cases were gradually decreased year by year. The third was the trawl of the coastal sea, this occupied about 2~4% and the controlled cases were a little bit decreased every year. 5. The most controlled address of illegal fishing manager was Pusan city which occupied about 33-51% of totality. The second was Cheonnam which occupied about 24-29%. The third was Kyungnam which occupied about 16~35%. 6. The most controlled violation of regulations was Article 57 of the Fisheries Act which occupied about 56-64% of totality. The second was Article 23 of Protectorate for Fisheries Resources which occupied about 21-36%. And the controlled cases by it were gradually increased every year.

• Progress in Medical Physics
• /
• v.23 no.2
• /
• pp.91-98
• /
• 2012

Verification of internal organ motion during treatment and its feedback is essential to accurate dose delivery to the moving target. We developed an offline based internal organ motion verification system (IMVS) using cine EPID images and evaluated its accuracy and availability through phantom study. For verification of organ motion using live cine EPID images, a pattern matching algorithm using an internal surrogate, which is very distinguishable and represents organ motion in the treatment field, like diaphragm, was employed in the self-developed analysis software. For the system performance test, we developed a linear motion phantom, which consists of a human body shaped phantom with a fake tumor in the lung, linear motion cart, and control software. The phantom was operated with a motion of 2 cm at 4 sec per cycle and cine EPID images were obtained at a rate of 3.3 and 6.6 frames per sec (2 MU/frame) with $1,024{\times}768$ pixel counts in a linear accelerator (10 MVX). Organ motion of the target was tracked using self-developed analysis software. Results were compared with planned data of the motion phantom and data from the video image based tracking system (RPM, Varian, USA) using an external surrogate in order to evaluate its accuracy. For quantitative analysis, we analyzed correlation between two data sets in terms of average cycle (peak to peak), amplitude, and pattern (RMS, root mean square) of motion. Averages for the cycle of motion from IMVS and RPM system were $3.98{\pm}0.11$ (IMVS 3.3 fps), $4.005{\pm}0.001$ (IMVS 6.6 fps), and $3.95{\pm}0.02$ (RPM), respectively, and showed good agreement on real value (4 sec/cycle). Average of the amplitude of motion tracked by our system showed $1.85{\pm}0.02$ cm (3.3 fps) and $1.94{\pm}0.02$ cm (6.6 fps) as showed a slightly different value, 0.15 (7.5% error) and 0.06 (3% error) cm, respectively, compared with the actual value (2 cm), due to time resolution for image acquisition. In analysis of pattern of motion, the value of the RMS from the cine EPID image in 3.3 fps (0.1044) grew slightly compared with data from 6.6 fps (0.0480). The organ motion verification system using sequential cine EPID images with an internal surrogate showed good representation of its motion within 3% error in a preliminary phantom study. The system can be implemented for clinical purposes, which include organ motion verification during treatment, compared with 4D treatment planning data, and its feedback for accurate dose delivery to the moving target.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.230-246
• /
• 2023

The wooden fence(木柵), which began to appear in the Bronze Age and is presumed to be the oldest defense facility in human history, was used as a fortress for the purpose of further strengthening military defense functions until after the Japanese Invasion of Korea in 1592 in the Joseon Dynasty(壬辰倭亂). As it was established as the concept of a fortress or a fence installed outside a fence castle(城柵) or barracks fence(營柵), its importance as an essential facility for defense was further highlighted. This study is the result of exploring wooden fence that were used as official facilities during the Joseon Dynasty, focusing on literature surveys such as 『Annals of the Joseon Dynasty』 and 『New Jeungdonggukyeojiseungram』 In this study, in particular, the conclusion of this study is as follows, focusing on the use and function of Nokgakseong(鹿角城), underwater wooden fence, installation methods, and materials of wooden fences, is as follows. The conclusions of this study, which focused on the materials of the wooden fence, are as follows. First, as invasions by foreign enemies became more frequent in the late Goryeo and early Joseon Dynasty, wooden fences played a major role as a major out-of-castle defense facility((防禦施設). In addition, wooden fences were modified and installed into various types such as wooden fences(木柵城), Nokgakseong, a fence made up of large branches in the shape of a deer antler, and underwater wooden fences(水中木柵) according to the circumstances of the times, government policy, and location environment. Second, wooden fences were installed in strategic locations in defense facilities for military purposes, such as mountain fortress(山城), fortresses(營), camps(鎭), forts(堡), and castles(邑城) in strategic locations, and were used for defense in case of emergency. According to the urgency of farming, it was installed in accordance with the non-farming season, when it is easy to mobilize manpower to avoid the busy farming season. The size of the wooden fence of the Joseon Dynasty, which are confirmed through literature records, was converted into Pobaekchuk(布帛尺), and the circumference was very diverse from 4,428chuk(2,066m) to 55chuk(25m). Third, Nokgakseong is an efficient combat support facility that is more aggressive than a general wooden fence, and the records of Nokgakseong in the Annals of the Joseon Dynasty appeared during the King Sejong period the record was 20 times, the most. By region, it was found that it was mainly installed in coastal rugged areas such as Pyeongan and Hamgildo(12), which are the 6-jin areas of the 4th Army. Fourth, in the early 15th century, as the royal court established a maritime defense strategy for the coastal area of the southern coast, after the Sampo Invasion(三浦倭亂), riots by Japanese settlers in Sampo in 1510, major military posts including eupseong(邑城), camps, and forts were established. The installation of underwater barriers around various government facilities rapidly increased as a defense facility to block the warships of Japanese pirates around various government facilities. Fifth, between the 15th and 17th centuries before and after the Japanese Invasion of Korea in Sampo, underwater fences were installed in the Southern coast and Ganghwa Island. In particular, in the 15th century, underwater fences were intensively installed in coastal areas of Gyeongsangnam-do, such as Jepo. Pine trees and Oaks are the main materials used for underwater fences, but other materials such as Oldham's meliosma, Loose-flower hornbeam and The vines of arrowroots were also used as materials for wooden fences.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.104
• /
• pp.10-39
• /
• 2023

Seongjusa Temple was founded in Boryeong in Chungcheongnam-do Province by Monk Muyeom (800-888), better known as Nanghye Hwasang. After returning from studying in China, Muyeom stayed in the Silla capital city of Gyeongju for a period. He later settled in a temple that was managed by the descendants of Kim In-mun (629-694). He then restored a burned-out temple and opened it in 847 as a Seon (Zen) temple named Seongjusa. It prospered and grew to become a large-scale temple with several halls within its domains. The influence of Seongjusa in the region can be seen in the Historical Record of Seongjusa Temple on Sungamsan Mountain, which relates that there were seventy-three rooms within the domains of the temple. What is most notable in the record is that the temple is referred to as "栴檀林九間," which means either "a structure with nine rooms built with Chinese juniper wood" or "a place that houses Chinese juniper wood and has nine rooms." Regardless of the interpretation, Seongjusa Temple had a large amount of juniper wood. Around this time, the term "juniper" referred to the olibanum tree (Boswellia sacra) native to the islands of Java and Sumatra in Southeast Asia. It is presumed that at some point after the death of Jang Bogo, the maritime forces that controlled the southwestern coast of Korea may have acquired a large amount of Southeast Asian olibanum wood and offered it to Seongjusa Temple. During the reign of King Munseong, Kim Yang (808-857) patronized Seongjusa Temple and its head monk Muyeom, who enjoyed a lofty reputation in the region. He sought to strengthen his own position as a member of the royal lineage of King Muyeol and create a bridge between the royal family and Seongjusan Buddhist sect. The court of King Wonseong designated Seongjusa Temple as a regional base for the support of royal authority in an area where anti-royal sentiment remained strong. Monk Muyeom is believed to have created an iron Buddha to protect the temple, enlighten the people, and promote regional stability. Given that the Seongjusa community had expanded to include more than 2,000 followers, the iron Buddha at Seongjusa Temple would have been perceived as an image that rallied the local residents. It is assumed that there were two iron Buddhas at Seongjusa Temple. The surviving parts of these Buddhas and the size of their pedestals suggest that they were respectively enshrined in the Geumdang Main Hall and the Samcheonbuljeon Hall of Three Thousand Buddhas. It is presumed that the first iron Buddha in Geumdang was a large statue over two meters in height and the second one was medium-sized with the height over one meter. The Historical Record of Seongjusa Temple on Sungamsan Mountain contains the phrase "改創選法堂五層重閣" which indicates that a multistoried Geumdang was newly built to enshrine a large Buddha sculpture like the first iron Buddha when Seongjusa Temple was founded. Also, according to the Stele of Seongjusa Temple and the surviving finger fragments, the first Buddha was making the fear-not and wish-granting (abhayavarada) mudras. The main Buddha of Seongjusa Temple is possibly Nosana Buddha, just like the main Buddhas at the contemporaneous temples Silsangsa, Borimsa, and Samhwasa. Given that Monk Muyeom studied Hwaeom teachings in his early years and received royal patronage upon his return, it is believed that the retro tendencies of the Hwaeom school, centered on the royal family of the Silla Dynasty, were reflected in Seongjusa temple.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.1
• /
• pp.30-41
• /
• 2007

Purpose: Bone metastasis in breast cancer patients are usually assessed by conventional Tc-99m methylene diphosphonate whole-body bone scan, which has a high sensitivity but a poor specificity. However, positron emission tomography with $^{18}F-2-deoxyglucose$ (FDG-PET) can offer superior spatial resolution and improved specificity. FDG-PET/CT can offer more information to assess bone metastasis than PET alone, by giving a anatomical information of non-enhanced CT image. We attempted to evaluate the usefulness of FDG-PET/CT for detecting bone metastasis in breast cancer and to compare FDG-PET/CT results with bone scan findings. Materials and Methods: The study group comprised 157 women patients (range: $28{\sim}78$ years old, $mean{\pm}SD=49.5{\pm}8.5$) with biopsy-proven breast cancer who underwent bone scan and FDG-PET/CT within 1 week interval. The final diagnosis of bone metastasis was established by histopathological findings, radiological correlation, or clinical follow-up. Bone scan was acquired over 4 hours after administration of 740 MBq Tc-99m MDP. Bone scan image was interpreted as normal, low, intermediate or high probability for osseous metastasis. FDG PET/CT was performed after 6 hours fasting. 370 MBq F-18 FDG was administered intravenously 1 hour before imaging. PET data was obtained by 3D mode and CT data, used as transmission correction database, was acquired during shallow respiration. PET images were evaluated by visual interpretation, and quantification of FDG accumulation in bone lesion was performed by maximal SUV(SUVmax) and relative SUV(SUVrel). Results: Six patients(4.4%) showed metastatic bone lesions. Four(66.6%) of 6 patients with osseous metastasis was detected by bone scan and all 6 patients(100%) were detected by PET/CT. A total of 135 bone lesions found on either FDG-PET or bone scan were consist of 108 osseous metastatic lesion and 27 benign bone lesions. Osseous metastatic lesion had higher SUVmax and SUVrel compared to benign bone lesion($4.79{\pm}3.32$ vs $1.45{\pm}0.44$, p=0.000, $3.08{\pm}2.85$ vs $0.30{\pm}0.43$, p=0.000). Among 108 osseous metastatic lesions, 76 lesions showed as abnormal uptake on bone scan, and 76 lesions also showed as increased FDG uptake on PET/CT scan. There was good agreement between FDG uptake and abnormal bone scan finding (Kendall tau-b : 0.689, p=0.000). Lesion showed increased bone tracer uptake had higher SUVmax and SUVrel compared to lesion showed no abnormal bone scan finding ($6.03{\pm}3.12$ vs $1.09{\pm}1.49$, p=0.000, $4.76{\pm}3.31$ vs $1.29{\pm}0.92$, p=0.000). The order of frequency of osseous metastatic site was vertebra, pelvis, rib, skull, sternum, scapula, femur, clavicle, and humerus. Metastatic lesion on skull had highest SUVmax and metastatic lesion on rib had highest SUVrel. Osteosclerotic metastatic lesion had lowest SUVmax and SUVrel. Conclusion: These results suggest that FDG-PET/CT is more sensitive to detect breast cancer patients with osseous metastasis. CT scan must be reviewed cautiously skeleton with bone window, because osteosclerotic metastatic lesion did not showed abnormal FDG accumulation frequently.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.9 no.1
• /
• pp.1-18
• /
• 1973

For regulating the depth of midwater trawl nets towed at the optimum constant speed, the changes in the shape of warps caused by adding a weight on an arbitrary point of the warp of catenary shape is studied. The shape of a warp may be approximated by a catenary. The resultant inferences under this assumption were experimented. Accordingly feasibilities for the application of the result of this study to the midwater trawl nets were also discussed. A series of experiments for basic midwater trawl gear models in water tank and a couple of experiments of a commercial scale gears at sea which involve the properly designed depth control devices having a variable attitude horizontal wing were carried out. The results are summarized as follows: 1. According to the dimension analysis the depth y of a midwater trawl net is introduced by $$y=kLf(\frac{W_r}{R_r},\;\frac{W_o}{R_o},\;\frac{W_n}{R_n})$$) where k is a constant, L the warp length, f the function, and $W_r,\;W_o$ and $W_n$ the apparent weights of warp, otter board and the net, respectively, 2. When a boat is towing a body of apparent weight $W_n$ and its drag $D_n$ by means of a warp whose length L and apparent weight $W_r$ per unit length, the depth y of the body is given by the following equation, provided that the shape of a warp is a catenary and drag of the warp is neglected in comparison with the drag of the body: $$y=\frac{1}{W_r}\{\sqrt{{D_n^2}+{(W_n+W_rL)^2}}-\sqrt{{D_n^2+W_n}^2\}$$ 3. The changes ${\Delta}y$ of the depth of the midwater trawl net caused by changing the warp length or adding a weight ${\Delta}W_n$_n to the net, are given by the following equations: $${\Delta}y{\approx}\frac{W_n+W_{r}L}{\sqrt{D_n^2+(W_n+W_{r}L)^2}}{\Delta}L$$ $${\Delta}y{\approx}\frac{1}{W_r}\{\frac{W_n+W_rL}{\sqrt{D_n^2+(W_n+W_{r}L)^2}}-{\frac{W_n}{\sqrt{D_n^2+W_n^2}}\}{\Delta}W_n$$ 4. A change ${\Delta}y$ of the depth of the midwater trawl net by adding a weight $W_s$ to an arbitrary point of the warp takes an equation of the form $${\Delta}y=\frac{1}{W_r}\{(T_{ur}'-T_{ur})-T_u'-T_u)\}$$ Where $$T_{ur}^l=\sqrt{T_u^2+(W_s+W_{r}L)^2+2T_u(W_s+W_{r}L)sin{\theta}_u$$ $$T_{ur}=\sqrt{T_u^2+(W_{r}L)^2+2T_uW_{r}L\;sin{\theta}_u$$ $$T_{u}^l=\sqrt{T_u^2+W_s^2+2T_uW_{s}\;sin{\theta}_u$$ and $T_u$ represents the tension at the point on the warp, ${\theta}_u$ the angle between the direction of $T_u$ and horizontal axis, $T_u^2$ the tension at that point when a weights $W_s$ adds to the point where $T_u$ is acted on. 5. If otter boards were constructed lighter and adequate weights were added at their bottom to stabilize them, even they were the same shapes as those of bottom trawls, they were definitely applicable to the midwater trawl gears as the result of the experiments. 6. As the results of water tank tests the relationship between net height of H cm velocity of v m/sec, and that between hydrodynamic resistance of R kg and the velocity of a model net as shown in figure 6 are respectively given by $$H=8+\frac{10}{0.4+v}$$ $$R=3+9v^2$$ 7. It was found that the cross-wing type depth control devices were more stable in operation than that of the H-wing type as the results of the experiments at sea. 8. The hydrodynamic resistance of the net gear in midwater trawling is so large, and regarded as nearly the drag, that sweeping depth of the gear was very stable in spite of types of the depth control devices. 9. An area of the horizontal wing of the H-wing type depth control device was $1.2{\times}2.4m^2$. A midwater trawl net of 2 ton hydrodynamic resistance was connected to the devices and towed with the velocity of 2.3 kts. Under these conditions the depth change of about 20m of the trawl net was obtained by controlling an angle or attack of $30^{\circ}$.