• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.47-57
• /
• 1989

T. verrucosum infection has been reported for the first time in 1986 in Korea and has been increasing progressively. To evaluate the progress of clinical and histopathological change of dermatophytosis caused by T. verrucosum, inoculation study, using T. verrucosum isolated from infected human(human strain) and from infected cattle(cattle strain), was done in 24 male albino Hartley guinea pig. Their clinical and histopathological changes were evaluated. In addition, comparison for the growth rate between human strain and cattle strain on Sabouraud's glucose agar was made. The results were as follows: 1. Growth rate on Sabouraud's glucose agar : Cattle strain showed significantly more rapid growth rate than human strain on Sabouraud's glucose rate at $25^{\circ}C$ and $37^{\circ}C$. And cattle strain showed more rapid growth rate at $37^{\circ}C$ than $25^{\circ}C$. But human strain showed no significant difference of growth rate at both temperature. 2. Clinical findings: Initial erythema, scale and crust were developed about 8th after inoculation. All three findings reached maximum severity about 12th to 16th day and disappeared about 30th to 34th day after inoculation. There was no significant difference in progress of erythema, scale and crust between cattle strain and human strain. 3. Histopathological findings: Although mild acanthosis was noticed on the 3rd day after inoculation, the other findings including parakeratosis, intraepidermal abscess, spongiosis and vascular change, cellular infiltration were found on 9th day after inoculation. They reached maximum severity on the 12th day and lasted to the 25th day after inoculation. After that, all three findings were decreased gradually between 29th day and 33th day. On the PAS stainings, hyphae and spores were found on the 6th day and disappeared on the 21th day after inoculation. 4. In trichophytin skin test, all of the 24 guinea pigs became positive within average $9.83{\pm}1.17$ lays. These findings suggested that dermatophytosis caused by T. verrucosum induced rapid cell mediated immunity and contributed to rapid resolution of the lesion.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.673-680
• /
• 2022

In this study, based on PLA, we analyzed the Hounsfield Unit (HU) of materials containing 20% each of aluminum, wood, copper, carbon, and marble, and tried to analyze how they affect the image. A cylindrical phantom of 5×30×30 ㎣ (thickness×diameter×height) was fabricated using a entry-level 3D printer. The kV was changed to 80, 100 and 120, and the mAs was changed to 100 and 200 mAs, and the phantom in the center of the table was cross-scanned under a total of six conditions. A circular ROI was set using image J program and the quantification value of the material part HU and the quantification value of the peripheral part CNR were obtained. The HU average of the material part increased in the order of [PLA - wood 20%], [PLA - marble 20%], [PLA - carbon 20%], [PLA 100%], [PLA - aluminum 20%], [PLA - copper 20%] (p<0.05) a negative correlation was confirmed with the HU by increasing kV. It was confirmed that the CNR value in the peripheral area increased in the order of [PLA - marble 20%], [PLA - copper 20%], [PLA - carbon 20%], [PLA - wood 20%], [PLA - aluminum 20%], and [PLA - 100%] (p<0.05). Human organs with similar HU values for each material are [PLA - copper 20%] compact bone, [PLA - aluminum 20%] cancellous bone, [PLA 100%] coagulated blood, [PLA - carbon 20%] and [PLA - marble 20%] liver, muscle, spleen and [PLA - wood 20%] had similar values to fat. In addition, we confirmed the blur phenomenon that blurs the image around the filament with all materials, and confirmed that [PLA 100%] especially has the most blur around the filament. Therefore, it is considered desirable to reflect the HU value of the target organ and consider cloudiness around the phantom when selecting materials for medical phantom fabrication, and this research can provide basic data.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.2
• /
• pp.63-75
• /
• 2013

The Inner Port Phase 2 area of the Pyeongtaek-Dangjin Port is enclosed by a total of three permeable sea-walls, and the disposal site to the east of the Inner Port Phase 2 is also enclosed by two permeable sea-walls. The maximum tidal range measured in the Inner Port Phase 2 and in the disposal site in May 2010 is 4.70 and 2.32 m, respectively. It reaches up to 54 and 27%, respectively of 8.74 m measured simultaneously in the exterior. Regression formulas between the difference of hydraulic head and the rate of interior water volume change, are induced. A three-dimensional numerical hydrodynamic model for the Asan Bay is constructed incorporating a module to compute water discharge through the permeable sea-walls at each computation time step by employing the formulas. Hydrodynamics for the period from 13th to 27th May, 2010 is simulated by driving forces of real-time reconstructed tide with major five constituents($M_2$, $S_2$, $K_1$, $O_1$ and $N_2$) and freshwater discharges from Asan, Sapkyo, Namyang and Seokmoon Sea dikes. The skill scores of modeled mean high waters, mean sea levels and mean low waters are excellent to be 96 to 100% in the interior of permeable sea-walls. Compared with the results of simulation to obstruct the flow through the permeable sea-walls, the maximum current speed increases by 0.05 to 0.10 m/s along the main channel and by 0.1 to 0.2 m/s locally in the exterior of the Outer Sea-wall of Inner Port. The maximum bottom shear stress is also intensified by 0.1 to 0.4 $N/m^2$ in the main channel and by more than 0.4 $N/m^2$ locally around the arched Outer Sea-wall. The module developed to compute the flow through impermeable seawalls can be practically applied to simulate and predict the advection and dispersion of materials, the erosion or deposion of sediments, and the local scouring around coastal structures where large-scale permeable sea-walls are maintained.

• Journal of Korean Society of Forest Science
• /
• v.49 no.1
• /
• pp.11-31
• /
• 1980

The morphological, anatomical and physiological traits were eximined for Populus alba ${\times}$ glandulosa which is an important planting species in Korea. The results obtained are as follows: 1. External characters in the leaf shape and chaff shape in the catkin were inherited as incomplete dominance but nectar gland was inherited as dominance. 2. Among the 15 selected clones, 9 clones were male, 2 clones female and 2 clones monoecious. 3. There were well-developed cork layers and bast fiber bundles in the bark. 4. Primordial leaves composed of 3 layers of cells and those undifferentiated into palisade and spongy parenchymas differed in its origin. 5. Leaf scare consisted of two kinds of tissues; one is connected to vascular bundle and the other not to vascular bundle. Tissues which had been connected to vascular bundle were isolated with only 2 or 3 layers of cork cells from the outside. 6. There was complicated arrangement in the vascular bundle of petioles. 7. Growth of the hybrid was sensitively influenced by external temperature, day-length and amount of light. In particular, it was apparent in height growth. 8. Flatness, loam soils and a $60{\times}60cm$ spacing might be best factors for the growth of P. alba ${\times}$ glandulosa. 9. The rooting of 15 clones was dependant upon external factors. 10. The growth of P. alba ${\times}$ glandulosa was best at around 80% of soil moisture content on the basis of plot water capacity. 11. Temperature difference between inside and outside stems below 100cm during the winter was the greatest at the south among seasons and among directions. 12. The sap movement was markedly influenced by air temperature, relative humidity in forest stand and moisture content in stem. 13. Total sugars in the cortex changed with season but did not differ in the dircetion of the stem. 14. Isoperoxidase variations in the leaf were different among 15 clones. Thus, it may be useful as a criterium for clonal identification. 15. The rate of soil moisture content decreased at a rapid slope was faster than that at a slow slope. Poor growth of P. alba ${\times}$ glandulosa at the slope was probably due to depletion of soil moisture.

• Clinical and Experimental Pediatrics
• /
• v.46 no.11
• /
• pp.1067-1072
• /
• 2003

Purpose : Non-accidental intracranial hemorrhage in children is not low in incidence and results in high mortality and serious sequelae. So, the authors have researched the distribution of sex and age, causes, symptoms and signs, hemorrhagic types, mortality rate and sequelae of the patients hospitalized with non-accidental intracranial hemorrhage at Hallym University Sacred Heart Hospital. Methods : The medical records of twenty patients, aged 15 or younger, and excluding neonatal patients, were analyzed retrospectively. The patients in this study were admitted with non-accidental intracranial hemorrhage from January 1999 to June 2002. Results : Of the twenty cases, the ratio of male to female was 1 : 0.8. The patients aged one or less and between 11 and 15 were discovered to be the most frequent cases. Shaken baby syndrome and arteriovenous malformation were found to be the most frequent causes. Seizure was most frequently found to be a symptom and a sign. Hemorrhagic type was classified into subdural hemorrhage eight, intracerebral hemorrhage five. There were three mortal cases. Twelve surviving patients, excluding five not-followed ones, were reclassified into six cases of complete recovery and six of sequalae. Conclusion : Non-accidental intracranial hemorrhage in children is not low in incidence, with a high mortality rate and a high incidence of serious sequelae after survival. Consequently, early diagnosis and appropriate treatment are required. In addition, appropriate rehabilitation after treatment is needed because the high survival rate due to advanced medical treatment results in an increasing number of neurologic sequelae.

• The Korean Journal of Malacology
• /
• v.24 no.3
• /
• pp.215-228
• /
• 2008

This study was performed to find out the community structure of macrobenthos and the environmental factors around Munseom coastal water in Jeju Island from June to December, 2007. Mean temperature and mean salinity were $19.6^{\circ}C$ and 34.03 psu, indicating stable water masses. Concentrations of DO, COD and SS were as low as those in the standard sea-water-quality classes I. Chlorophyll a concentrations ranged from 0.40 to 1.09 mg/L (mean, 0.69 mg/L), and higher concentration was observed in December rather than in June due to a blooming in winter. The mean concentration (their ranges are in parentheses) of nitrate, phosphate, and silicate were 0.15 mg/L (0.073-0.264 mg/L), 0.01 mg/L (0.004-0.011 mg/L) and 0.23 mg/L (0.039-0.464 mg/L), respectively. The values were higher near the Munseom due to influxes from the land. Of the 112 species that were identified, 40 species (36.0%) were Mollusca; 33 (28.8%) were Cnidaria; 13 (11.7%) were Porifera; 8 (7.2%) were Arthropoda and 17 species (15.3%) were others including Echinodermata. Density and biomass were estimated to be 4,340 individual/$m^2$ and $53,107.8\;gwwt/m^2$ respectively. Anthozoa was the most dominant group in abundance ($2,132\;ind./m^2$) as well as in the number of species, whereas Cnidaria was predominant in biomass ($37,630.9\;gwwt/m^2$). The dominant species were Dendronephthya gigantea, Scleronephthya gracillimum, Anthoplexaura dimorpha, Dendronephthya castanea, Thecocarpus niger, Dendronephthya spinulosa, Dendronephthya putteri, and Acabaria bicolor in the depth of 10-30 m. The seasonal variations of the number of individual and biomass of Cnidaria and Mollusca were observed. There was a slow increment in June, a decrement in October, and a drastic increasing in December. The biodiversity, evenness and richness index in surveyed stations were 2.715-3.413 (H'), 0.758-0.851(E'), and 5.202-8.720 (R) respectively. The dominance index was the highest in station M2 and the lowest in station M1.

• Journal of Life Science
• /
• v.17 no.10
• /
• pp.1447-1451
• /
• 2007

Through the screening of marine natural compounds that inhibit cancer cell proliferation, we previously reported that pectenotoxin-2 (PTX-2) isolated from marine sponges exhibits selective cytotoxicity against several cell lines in p53-deficient tumor cells compared to those with functional p53. However, the molecular mechanisms of its anti-proliferative action on malignant cell growth are not completely known. To further explore the mechanisms of its anti-cancer activity and to test whether the status of p53 in liver cancer cells correlates with their chemo-sensitivities to PTX-2, we used two well-known hepatocarcinoma cell lines, p53-deficient Hep3B and p53-wild type HepG2. We have demonstrated that PTX-2 markedly inhibits Hep3B cell growth and induces apoptosis whereas HepG2 cells are much more resistant to PTX-2 suggesting that PTX-2 seems to act by p53-independent cytotoxic mechanism. The apoptosis induced by PTX-2 in Hep3B cells was associated with the modulation of DNA fragmentation factor (DFF) family proteins, up-regulation of pro-apoptotic Bcl-2 family members such as Bax and Bcl-xS and activation of caspases (caspase-3, -8 and -9). Blockade of the caspase-3 activity by caspase-3 inhibitor, z-DEVD-fmk, prevented the PTX-2-induced growth inhibition in Hep3B cells. Moreover, treatment with PTX-2 also induced phosphorylation of AKT and extracellular-signal regulating kinase (ERK), but not c-Jun N-terminal kinase (JNK) and p38 mitogen-activated protein kinase (MARK). Specific inhibitors of PI3K inhibitor (LY294002) and ERK1/2 inhibitor (PD98059) significantly blocks PTX-2-induced-anti-proliferative effects, whereas a JNK inhibitor (SP600125) and a p38 MAPK inhibitor (SB203580) have no significant effects demonstrating that the pro-apoptotic effect of PTX-2 mediated through activation of AKT and ERK signal pathway in Hep3B cells.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.324-332
• /
• 2009

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

• Journal of Chest Surgery
• /
• v.41 no.3
• /
• pp.295-304
• /
• 2008

Background: Various experimental trials for the development of bioprosthetic devices are actively underway, secondary to the limited supply of autologous and homograft tissue to treat cardiac diseases. In this study, porcine bioprostheses that were treated with glutaraldehyde (GA), ethanol, or sodium dodecylsulfate (SDS) were examined with light microscopy and transmission electron microscopy for mechanical and physical imperfections before implantation, Material and Method: 1) Porcine pericardium, aortic valve, and pulmonary valve were examined using light microscopy and JEM-100CX II transmission electron microscopy, then compared with human pericardium and commercially produced heterografts. 2) Sections from six treated groups (GA-Ethanol, Ethanol-GA, SDS only, SDS-GA, Ethanol-SDS-GA and SDS-Ethanol-GA) were observed using the same methods. Result: 1) Porcine pericardium was composed of a serosal layer, fibrosa, and epicardial connective tissue. Treatment with GA, ethanol, or SDS had little influence on the collagen skeleton of porcine pericardium, except in the case of SDS pre-treatment. There was no alteration in the collagen skeleton of the porcine pericardium compared to commercially produced heterografts. 2) Porcine aortic valve was composed of lamina fibrosa, lamina spongiosa, and lamina ventricularis. Treatment with GA, ethanol, or SDS had little influence on these three layers and the collagen skeleton of porcine aortic valve, except in the case of SDS pre-treatment. There were no alterations in the three layers or the collagen. skeleton of porcine aortic valve compared to commercially produced heterografts. Conclusion: There was little physical and mechanical damage incurred in porcine bioprosthesis structures during various glutaraldehyde fixation processes combined with anti-calcification or decellularization treatments. However, SDS treatment preceding GA fixation changed the collagen fibers into a slightly condensed form, which degraded during transmission electron micrograph. The optimal methods and conditions for sodium dodecylsulfate (SDS) treatment need to be modified.

• Korean Journal of Weed Science
• /
• v.17 no.3
• /
• pp.288-294
• /
• 1997

Field and pot expeiments were carried out to evaluate the interaction between quinclorac and bensulfuron-methyl on growth of the rice plants(Oryza sativa L. cv. Choocheongbyeo) at 20, 45, 65 days-old stages. Quinclorac and bensulfuron-methyl showed antagonistic interaction at both stages, which were detected by the Chisaka's method at isobles of 10% growth inhibition. The antagonism indices were -0.63 and -1.67 at 20 and 65 days-old seedling stages, respectively. Leaf-rolling of rice occurred when quinclorac was applied at 600g ai/ha or more at 20 days-old seedling stage, while it occured at the dose of 900g ai/ha at 65 days-old stage. Bensulfuron-methyl reduced plant height and dry weight as well as tiller production at both stages. Leaf-rolling of rice was reduced when mixture of quinclorac and bensulfuron-methyl was applied due to antagonism of the two herbicides. High temperatures increased the phytotoxicity of bensulfuron-methyl, while the phytotoxicity caused by quinclorac alone was not responsive to temperature. The antagonistic effect between quinclorac and bensulfuron-methyl increased at low temperature as tested by the Colby's method.