• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.4
• /
• pp.357-362
• /
• 2011

It has been often reported that a water-jet propelled high speed vessel lost the course keeping ability in seaway. In this study, model tests of a high speed vessel were performed to measure the running attitude and to check the course keeping ability. The model ship may lose the course keeping ability due to bad running attitudes such as bow drop. So model tests were carried out to improve the running attitude by changing the position of longitudinal center of gravity and using appendages at the bow and the stern of a model. The position of lateral center of pressure moved toward stern and the course keeping ability was improved by modifying the transom wedge angle.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.3
• /
• pp.267-274
• /
• 2011

This paper presents the results of prediction of maneuverability of KCS about 4 degree of freedom(DOF) including roll motion. The prediction is carried out by CPMC captive model test. The CPMC(Computerized Planar Motion Carriage) with captive model test equipment including roll moment gage is installed at Ocean Engineering Tank of MOERI. KCS is the container ship open to the world by MOERI. To predict the 4 DOF maneuverability of a ship some tests with roll angle are conducted. And the prediction results of maneuverability by simulation are compared with the results of free running model test. The simulation results agree well with those of free running model tests.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.631-636
• /
• 2006

In this paper, the wave pattern around the hull with the transom stern advancing on the free surface with a constant speed was taken into consideration. To solve the problem the numerical analysis program was developed using Rankine source panel method based on potential flow analysis technique. The non-linearity of the free surface boundary conditions was fully satisfied. To verify the validity of the developed program the numerical calculations for Athena hull and KCS(KRISO container ship) hull was performed. The results of the numerical computation was compared with the ones of the model test experiment.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.87-90
• /
• 2006

MPEG 표준화 그룹에서는 응용 서비스 중심의 목적 지향형 표준 규격 제정을 목표로 멀티미디어 응용 표준화 (MPEG-Applications: ISO/IEC 23000, MPEG-A) 활동을 활발하게 진행하고 있다. 멀티미디어 응용 표준화는 기존의 규격들 중 특정 서비스를 위해 이미 존재하는 필요한 표준 규격만을 조합하여 하나의 표준으로 규격화하므로 산업계의 요구에 유연하게 대처하고 다양한 응용 서비스를 제공하는데 효율적이다. 본 논문에서는 2006년 10월 중국 항주에서 개최된 제 78차 MPEG 회의에서 제안된 디지털 멀티미디어 방송 (Digital Multimedia Broadcasting) 멀티미디어 응용 포맷 (Multimedia Application Format, MAF) 기술을 소개한다. 디지털 멀티미디어 방송 마프 기술은 기존의 DMB AV 콘텐츠 및 그것의 부가 데이터 그리고 소비자가 원하는 형태의 소비를 돕도록 하는 방송 콘텐츠 정보 메타데이터 및 콘텐츠 보호 메타데이터를 하나의 파일 형태로 구성 하는 파일 포맷 구조를 제공한다. 이러한 기술을 이용하여 일방적인 DMB 방송 서비스 형태에서 벗어나 사용자가 원하는 다양한 소비 형태를 지원할 수 있도록 하는 맞춤형 DMB 방송 서비스 등 일회성 사용에서 벗어나 콘텐츠의 활용도를 높일 수 있다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.157-162
• /
• 2008

The ship's maneuverability is the important factor to avoid ship's collisions. The ship's maneuverability is usually measured in a deep water, and the turning ability is decreased and the course stability is improved in a shallow water. The variation of the turning ability could cause the risk of collision. In this paper, we proposes application technique of Variable Safe-Guard Ring to consider the shallow water effect and to be simple to estimate the grade of collision risk simultaneously. Through the mathematical simulation, the availability of new method was varified. Therefore this method is expected enough to support a maneuver for collision avoidance.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.72-76
• /
• 1999

To predict the maneuverabiliy of a ship, it is most reliable to carry out the model tests for the ship. But, at the initial design stage of ships, scene other methods of predicting the overall maneuverabiliy of ships with confined data, like principal dimensions and propeller and rudder characteristics, are required. In this paper, the authors suggested new formulas for the linear derivatives of the sway force and yaw moment, based on the captive model test carried out by the Japanese researchers. These formulas can account the effects of stern frame line shape and stern profile, when assessing the maneuverability of ships. The usefulness of the formulas are discussed by comparing the simulations with the model tests.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.77-94
• /
• 1991

A finite difference method based on MAC method is used to simulate free-surface waves around a ship. Euler equations and continuity equation are differentiated using the forward time and central space, and solved by time marching scheme. By the employment of variable mesh system in horizontal and vertical direction, the numerical accuracy of wave simulation results is grossly improved. To verify the improvement of numerical accuracy, some numerical simulations are accomplished for Wigley, Series 60($C_{b}$=0.6) and a bulk carrier model. The computational results are compared to the various experimental data and show good agreements.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.3
• /
• pp.395-403
• /
• 2016

A cylinder-type underwater vehicle for military use that is running near the free surface at the final homing stage to hit a surface ship target is affected by wave force and moment. Since wave can affect an underwater vehicle running at the depth less than half of the modal wave length, it is important to confirm that the underwater vehicle can work well in such a situation. In this paper, wave force and moment per unit wave amplitude depending on wave frequency, wave direction, and vehicle's running depth were calculated by 3-Dimensional panel method, and the numerical results were modeled in external force terms of six degrees of freedom equations of motion. Motion simulation of the underwater vehicle running in various speed, depth, and sea state were performed.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.32-42
• /
• 2006

This study aims at establishing a technique for sailing yachts model tests with sailing condition. It is very important to estimate a ship's potential speed performance before building a real ship. Several methods are used to estimate a ship's potential speed performance such as using parent ship data, standard vessel chart and model test. Model test is the most precise among these options. In korea. model testing is widely used with general vessels but not with sailing yachts. Because sailing yachts are propelled with heeling and leeway. using the wind. another method is needed to estimate their speed. The new model test. which is different from tests for upright general vessels, is in a great demand. In this paper. we describe a test method for the sailing yacht model test. based on Masuyama's equation of motion. And we describe choosing scale ratio. production process and materials of the model. Also. various ways of measuring instruments. attaching jigs and adjusting calibration are described so that they can be utilized as useful data for model testing.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.301-307
• /
• 2017

The planing hull is characterized by a large change in the posture according to the speed, and the shape of the propeller varies, so that the hull resistance varies greatly depending on the propeller used. Especially, the Savitsky system, which is widely used for estimating the resistance of planing hull, does not consider the characteristics of these propeller and ship bottom spray rails. In this paper, in order to investigate the difference in resistance characteristics between the propeller and the bottom of the propeller of 6m and 12m class propeller using propeller such as outboard or stern drive, A comparative test was conducted on resistance and attitude posture changes in the Circulating Water Channel of Institute of Medium & Small Shipbuilding. As a result of comparison test, it was confirmed that there is a clear difference in the attitude change due to the presence of the bottom floor spray rail and the change in resistance characteristics due to the installation of the propeller. However, attitude change with the propeller was found to be insignificant.