• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.2
• /
• pp.11-19
• /
• 1987

A Series 60, $C_b=0.60$ model was tested in the towing tank of Seoul National University. Total resistance, hull attitude, wake distributions and wave measured at FR condition(free trim and sinkage) and FX condition(fixed trim and sinkage). From the measured data, residual, viscous and wave pattern resistance components were evaluated and compared. It is found that the changes in wetted surface area should be considered in predictions of frictional resistances, and can be easily found from hydrostatic data and measured mean sinkages without additional tests. Applications of the concept to the geosim tests of Series 60, Wigley, Lucy Ashton models show that the conventional extrapolation method can be improved considerably.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.1 s.145
• /
• pp.50-58
• /
• 2006

Free running model tests gives us only maneuvering indices not hydrodynamic derivatives. For this reason, system identification method has been applied to the measured data to identify mathematical model describing hydrodynamic force. However It is difficult to obtain complete set of maneuvering derivatives because of strong correlation of sway velocity and yaw rate. Therefore, in this paper, we assumed that sway velocity related coefficients would be obtained by oblique towing test. and then proposed new procedure to estimate yaw related coefficients. To do this, correlation and regression analyses were carried out to establish modified model and estimate maneuvering derivatives. Also D-optimal rudder input scenario was found based on the modified model and confirmed the validity of its sufficient richness as a input scenario.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.232-233
• /
• 2017

In this research, tunnel stern was applied on the asymmetric high-speed catamaran to evaluate vessel's hydrodynamic performance by numerical method, and the tunnel stern types are distinguished by angle of inclination of tunnel exit region into 3cases ($0^{\circ}$, $3^{\circ}$ and $6^{\circ}$). Consequently, it is confirmed that the total resistances of tunnel stern which have $0^{\circ}$ of inclination are lower about 4.8-17.9% than the bare hull in the wide speed range, but those of $3^{\circ}$ and $6^{\circ}$ of inclination tunnel stern are higher than bare hull about 5-14% and 5-29%, respectively. On the other hand, trim angles of $0^{\circ}$ of inclination tunnel stern show similar trend with those of bare hull in whole ranges of FnV but those of $3^{\circ}$ and $6^{\circ}$ of inclination tunnel stern are stabilized and declined respectively after FnV=1.54. These phenomena indicated that increasing angle of inclination of tunnel exit region had negative influence on resistance performance, however, it could make vessel's operation performance better than bare hull.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.184-193
• /
• 2024

Harbor and Fishery Design Criteria defines that ship routing should be designed to ensure safe ship navigation and easy maneuvering. The design of the channel width is one of the critical conditions in routeing of ships. For the criteria of the channel width, qualitative evaluation criteria are used in South Korea, whereas quantitative evaluation criteria are used in other countries. Environmental factors, such as winds, tidal currents, and waves directly or indirectly affect ship resistance when sailing. Depending on their strength the environmental factors may pose a threat to the safe navigation of ships. Thus, vessel traffic control was regulated in South Korea according to the Beaufort scale. In order to design the channel width to reflect the environmental factors closely related to the safe navigation of ships, quantitative evaluation criteria reflected with environmental factors were presented in other countries, however, these external factors were not considered in South Korea. This study analyzed the relationship between the channel width actually used by ships and environmental factors by using the trajectories of ships entering and leaving Mokpo Port. This study also suggested the required channel width according to tidal currents and compared it with the channel width design criteria of other countries.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.2
• /
• pp.1-7
• /
• 1998

Hull form development of the medium size high speed fishery patrol ship was carried out in the CWC at Chosun university. Same size of 15 knots class fishery patrol ship was selected as a parent form(Model number : CU-015), and modified fore and after body hull form under the slightly lengthened lo be suitable for the operation at 20 knots. To minimize the breaking wave in the vicinity of fore body at high speed zone, high bulb and sharp entrance angle were adapted. Meanwhile, to enlarge the engine room space keeping high resistance and sea-keeping Performance, U-type stern hull form was developed. Although the hull form was highly constrained in being limited to modification of a parent hull form significant wave resistance improvement was made.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.297-301
• /
• 2008

On-site measurement of ship wave has been carried out in the vicinity of Mokpo inner harbour. The wave data were collected and logged 5Hz by the ultrasonic instrument for 12hour on May 17, 2006. The number of data was 216,000 and the maximum wave height was 81.41cm in normal weather condition. It was found that the wave conditions in this water area are predominantly affected by the ship-generated waved under normal condition. By comparing with the wind-generated waves in the open region which were irregular but with dominant directional characteristics, the existing harbor wave field was much more complex.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.3-4
• /
• 2011

In this study, the nonlinear mathematical model of Manta type UUV is derived the hydrodynamic derivatives and the sliding mode controller of Manta type UUV test bed is designed. The sliding mode control scheme is used for robust control on the nonlinear motion. The designed controller is used the depth and heading control. It is based on the 6 DOF mathematical model with effect of the ocean currents. As a result, the performance of the designed controller is confirmed by computer simulation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.3
• /
• pp.135-147
• /
• 2011

The purpose of this study was to analyze clothes-wearing of Chinese female university students in Hangzhou. By random sampling, a total of 183 Chinese female students in Hangzhou aged between 17 and 24 were used into data analysis from November 20, 2010 to January 20, 2011. The questionnaires consisted of 36 questions in total. The results were as follows : According to the result of the purpose of wearing clothes in winter, it was found that many female students wore clothes for a "protection purpose" or "ornamental purpose" in winter. As for the question about whether or not underwear was worn in winter, Chinese students answered that more upper underwear was worn than lower underwear. As for the question about the types of outer garments, Chinese students answered that they wore 3-layered upper garments in winter most. The upper garments worn in winter preferred most was long coat(68.3%). In the survey on the types of accessories, More Chinese students wore mufflers and gloves while less students wore hats and earmuffs.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.29-33
• /
• 2007

On-site measurement of ship wave has been carried out in the vicinity of Mokpo inner harbour. The wave data were collected and logged 5Hz by the ultrasonic instrument during 12hour May 17th 2006. The number of data is 216,000 and the maxinum wave heght is 81.41cm in normal weather condition It is found that the wave conditions in this water area are predominantly affected by the ship-generated waved under normal condition By comparing with the wind-generated waves in the open region which are irregular but with dominant directional characteristics, the existing harbor wave field is much more complex.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.4
• /
• pp.477-486
• /
• 2010

During sailing by wind-driven thrust on the sail, a catamaran sailing yacht generates leeway and heeling. For predicting sail force, a model test was carried out according to running attitude. Through the model test, drag and side force of the real ship was predicted. A purpose of this study is to find sail force to C.E from changed attitude during running direction. By balance of hull and sail, a heeling force of designed sail is predicted. Also through heeling force and driving force, total sail force and direction from C.E are considered with changed mast including leeway and heeling.