• Title/Summary/Keyword: 항주파고

Search Result 43, Processing Time 0.024 seconds

Transistor Wide-Band Feedback Amplifiers (트랜지스터 광대역궤환증폭기)

  • 이병선;이상배
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.5 no.1
    • /
    • pp.13-25
    • /
    • 1968
  • A detailed analysis of the transistor wide-band feedback amplifiers using the hybrid-$\pi$ equivalent circuit has been made. It is considered both for the low freqnency and for the high frequency. The expressions of the gain, bandwidth. input impedance and output impedance have been presented. It is shown that a series feedback amplifier should be driven from the voltage source and should drive into the low resistance load, and a shunt feedback amplifier should be driven from the current source and should drive into the high resistance load. It is also shown that these stages can be coupled without use of the buffer stage or coupling transformer.

  • PDF

Resonant Characteristics in Rectangular Harbor with Narrow Entrance (1.Field Measurements and Data Analyses) (개구부가 좁은 직사각형 항만의 공진특성(1.현장관측과 자료 분석))

  • 정원무;박우선;서경덕;채장원;정신택
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.11 no.4
    • /
    • pp.201-215
    • /
    • 1999
  • Field measurements were made for long- and short-period waves and current velocities at the harbor mouth using pressure-type wave gauges and a current meter, respectively, at the Gamcheon Harbor which has a rectangular shape with a narrow entrance. The measured pressure data were subjected to spectral analyses after removing tidal effects by applying trend removal and high-pass filtering. For the band averaging of the raw spectra, in order to obtain good resolution over the entire frequency, instead of a constant band width, variable band widths were used, which gradually increase as marching from the lowest frequency towards higher frequencies. The Helmholtz resonance mode at the Gamcheon Harbor shows the relative amplification ratio of 9.2 at the wave period of 31.7 minutes, which is quite large compared with those at the harbors located on the east coast of Korea. The second and the third resonance period was 10.3 and 5.4 minute, respectively. On the other hand, the analysis of every 24 hours data shows that during storms the spectral densities are very large compared to those during calm seas and also the second and third resonances are predominant.

  • PDF

Active suspension with preview using a frequency and time-shaped complex type performance index (시간역과 주파수역의 복합형태 성능지수를 이용한 차량현가계의 예견 능동제어)

  • Kim, H.;Yoon, Y. S.
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.16 no.3
    • /
    • pp.19-29
    • /
    • 1994
  • 본 연구에서는 상태방정식과 출력방정식에 외란항을 포함하게 된다. 최적조건을 이용하여 외란항을 포함한 리카티 방정식을 유도하고 그로부터 제어로직을 얻을 수 있다. 본 연구에서의 차량 모델링은 스프링 위 질량 3자유도와 스프링 아래 질량 4자유도 운전석의 연직방향 1자유도를 포함한 총 자유도의 선형모델로 하였다. 또 본 연구에서는 예견제어를 이용하였는데 차량앞에 미리 도로면의 정보를 인식할 수 있는 가상적인 측정장치가 있다고 가정하였다. 결과에서는 기존의 수동형 현가장치와 최적제어를 이용한 능동형 현가장치를 구분하고, 예견시간에 따른 차량의 성능을 비교 분석하였다.

  • PDF

신경회로망을 이용한 PMSM의 속도 및 위치센서리스제어

  • 이영실;이정철;이홍균;정택기;정동화
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 2003.05a
    • /
    • pp.372-377
    • /
    • 2003
  • 센서리스 제어는 고정자 전압과 전류, 역기전력 등과 같은 정보를 이용하여 회전자의 속도 및 위치를 추종하는 방법이다. 센서리스는 수학적 모델, 물리적인 현상 및 제어 이론을 이용하는 방법으로 분류되어 연구되고 있다. 수학적인 모델을 이용하는 방법에는 고정자 전압에서 고정자 저항에 의한 전압 강하분을 제거한 항을 적분하여 자속의 위치를 추정한다.[1] 물리적인 현상을 이용하는 방법에는 INFORM 방법과 고주파 전압을 주입하는 방법 등이 있다. 제어이론을 이용하는 방법은 MRAC, EKF 및 상태관측기[2]등을 이용하는 방법이다.(중략)

  • PDF

Highly Reliable Digital Image Watermarking Based on HVS and DWT (HVS 및 DWT 기반의 고신뢰 디지털 영상 워터마킹)

  • 권성근;권기구;하인성;권기룡;이건일
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.12A
    • /
    • pp.2100-2108
    • /
    • 2001
  • A digital image watermarking algorithm is proposed that uses human visual system (HVS) and discrete wavelet transform (DWT). In this algorithm, an image is decomposed into four-level by DWT which reveals the characteristics of the human eyes and watermark is embedded into DWT coefficients using HVS. For robustness, the lowest level subbands which represent the highest frequency component are excluded in watermark embedding step and watermark is embedded into the perceptually significant coefficients (PSCs) of the rest subbands. PSCs of the baseband are selected according to the amplitude of the coefficients and PSCs of the high frequency subbands are selected by successive subband quantization (SSQ). Watermark is embedded into the PSCs of the baseband and high frequency subbands by Weber\`s law and spatial masking effect, respectively, for the invisibility and robustness. We tested the performance of the proposed algorithm compared with the conventional watermarking algorithm by computer simulation. Experimental results show that the proposed watermarking algorithm produces a better invisibility and robustness than the conventional algorithm.

  • PDF

NBI 가열 플라즈마에서 고속이온 분포의 수치적 계산 및 측정결과 비교

  • Wang, Seon-Jeong;Kim, Seon-Ho;Kim, Seong-Gyu
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.263-263
    • /
    • 2012
  • 핵융합 플라즈마에서의 고속이온은 NBI 및 ICRF에 의한 이온 가열과 핵융합 반응에 의하여 발생하며, 핵융합 반응률을 크게 하고 일차적으로 그 에너지를 전자에게 전달하는 특성을 갖는다. 따라서 핵융합을 지향하는 플라즈마에서는 그 성능을 나타내는 지표이기도 하면서, 맥스웰 분포를 갖는 열화 플라즈마의 수송특성을 크게 변화 시킨다. 또한 알펜파 등의 파동 또는 불안정성을 유발시키며 이로 인한 플라즈마 손실은 국지적인 일차벽의 가열을 유발할 수 있는 것으로 여겨진다. 본 연구에서는 일반적인 기하학적 구조를 갖는 토카막에서의 NBI 가열에 의한 고속이온 발생과 위상공간에서의 수송 및 손실을 시간 의존적인 Fokker-Planck 방정식을 수치적으로 풀어서, 위치에 따른 고속이온 분포의 변화를 계산한다. NBI 입사의 기하학적 모델에서는 각 계산 위치에서의 피치각 변화와 stagnation point의 변화에 의한 영향을 고려하며, 일반적인 고속이온의 각종 모멘트 뿐 아니라 즉발 이온 손실률을 계산에 포함한다. 해석된 고속이온 분포는 중성입자 검출기에서 측정한 KSTAR 플라즈마의 고속이온 에너지 분포와 비교한다. 차후에는 본 연구에서 사용한 Fokker-Planck 출동연산자에 고주파 가열에 의한 고속이온발생 항을 추가하여 ICRF 가열에 의한 효과를 예측할 수 있도록 할 것이다.

  • PDF

A Study on the Distortion Reducing of Output Voltage for UPS by Estimated Load Current (부하전류 예측에 의한 UPS의 출력전압 왜형률 개선에 관한 연구)

  • 변영복;박성준;추영배;권순재;김철우
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.12 no.1
    • /
    • pp.69-77
    • /
    • 1998
  • The uninterruptible power supply (UPS) has become an integral part of modern computer and communication system to assure a continued and stable operation by providing an uninterruptible power to vital equipments. Various control methods have come to the fore in recent times with the advent of high frequency switching technologies. This paper describes the DSP control method for three phase UPS inverter which guarantees the sinusoidal output voltage under nonlinear load conditions. The proposed control scheme is verified by simulation and experiment.riment.

  • PDF

Relation of Grain Size with Magnetic Domain Wall for Tertiary Recrystallized 3% Si-Fe Strip (3차 재결정에 의한 극박 방향성 규소강판의 결정립 크기와 자벽수와의 관계)

  • ;K. I. Arai
    • Journal of the Korean Magnetics Society
    • /
    • v.6 no.3
    • /
    • pp.165-169
    • /
    • 1996
  • The relationship between grain size and number of magnetic domain walls for tertiary recrystallized ultra thin 3 % Si-Fe strips was investigated. It was found that the strips with different grain size can be produced by controlling the inserting speed of sample in annealing furnace. Though grain size of the stirip became smaller than 1mm, $B_{8}$ of high value above 1.95T was obtained. But $H_{c}$ increased with decaying the grain size. The magnetic domains and losses of the ultra thin grain oriented silicon steel with smaller grian size were observed. The eddy current losses of the strips were decreased with decreasing the grain size in high frequency range because strips with smaller grain have narrower magnetic domain wall spacings. But Hysteresis losses of the strips with smaller grain have high value in low frequency range. Therefore the iron loss of ultra thin grain oriented silicon steel could be controlled by the grain size. It was clarified that the minumum tatal loses depended on the exciting frequency and grain size.

  • PDF

The Crystallographic and Magnetic Properties of $Fe_{1-x}Co_x$System ($Fe_{1-x}Co_x$계의 결정구조와 자기적인 성질)

  • 김정기;한경훈;서정철
    • Journal of the Korean Magnetics Society
    • /
    • v.9 no.4
    • /
    • pp.190-195
    • /
    • 1999
  • The crystallographic and magnetic properties of the system of $Fe_{1-x}Co_x$(x=0.2 and 0.4) prepared by microwave arc-melting with the maximum power of 3.5 kW and a iron-foil with thickness of 25 ${\mu}{\textrm}{m}$ have been studied by the methods of X-ray diffraction and the measurement of the magnetic hysteresis using the vibrating sample magnetometer at room temperature. The samples were prepared in three different ways: First, pellet form pressed under the pressure of 9,000 N/$\textrm{cm}^2$. Second, the sheet cold rolled. Third, thin sheet treated with the temperature of 90$0^{\circ}C$. The X-ray diffraction pattern of the sample prepared by the first method shows that the crystal structure of the sample is bcc as same as that of Fe with a good uniformity. The iron-foil has the coercivity of 43 Oe and the initial slope of magnetization of 0.328 emu/gOe. The coervicity and magnetization of the sample prepared by the second method increased as the Co content increased. But the initial slop of the magnetization decreased as the Co content increased. This means that the displacement of domain wall is suppressed by the increases of coercivity as the Co content increased. The saturation magnetization of the samples made by the third method increased. On the other hand, the coercivity of these samples decreased. The increase of saturation magnetization of the samples seems to be related to the changes in X-ray intensity after heat treatment. Also some magnetic parameters of the samples were calculated by using a simple model and compared with other values.

  • PDF

Estimation of the thickness of floating silty clay sediment using dual frequency single beam echo sound system (이중 주파수 에코 사운드 시스템을 이용한 부니층 두께 조사)

  • Ha, Hee-Sang
    • Journal of the Korean Geophysical Society
    • /
    • v.5 no.3
    • /
    • pp.219-231
    • /
    • 2002
  • Single beam echo sounding was used to delineate bathymetry sea bottom in the area of hydrography and marine navigation. This research was aimed at measuring the thickness of floating silty clay sediment with dual frequencies echo sounding system. There occur discrepancies in penetrating depth through sea beds between high frequency(200 KHz) and low(33 KHz) frequency. RI density logging was employed to characterize the floating silty clay sediment of Guangyang bay, which was chosen to investigate the proposed site for reclamation field. The volume of floating silty clay sediment was used to design by estimating size of reclamation site. The estimation strategies developed in this study will be readily applicable to measure the Pattern of sedimentation via regular hydrographic survey in the future.

  • PDF