• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.438-444
• /
• 2000

The prediction of mechanical properties for WC-Co alloys by evaluation of coercive force and magnetic saturation were studied in relation to their microstructure. The WC-8%Co alloys were prepared using different WC particle size, carbon content and various sintering temperature by PM process. The magnetic properties such as coercive force and magnetic saturation of sintered WC-Co alloys were critically dependent upon their final composition and microstructure. Slight changes of carbon contents and small variation of WC grain size result in marked changes of magnetic properties, hardness and transverse rupture strength of sintered WC-Co alloys. It was found that the coercive force and hardness were increased by fine WC grain size of sinterd alloys, and the coercive force was proportional to hardness. With decreasing total carbon content below the stoichiometric value in WC-8%Co alloys the volume fraction of $\eta$ phase increased steadily, while the magnetic saturation and transverse rupture strength decreased. The magnetic saturation was inversely proportional to the coercive force of WC-Co alloys.

• 전기의세계
• /
• v.42 no.9
• /
• pp.20-27
• /
• 1993

1. 철근출막은 결정자기이방성의 영향이 작기 때문에, 자기특성이 막의 기하학적구조에 의해 거의 결정되고 그것에 의하여 자성막의 설계가 가능하다. 2. 코발트 근출막은 결정자기이방성이 자기특성에 영향은 크기때문에 코발트 결정의 자화용역축(C축)의 배향에 의하여 자기특성은 크게 변한다. 따라서 이 C축의 배향성을 변화시켜 석출입자의 형태를 바꾸지 않고 작은 포아직경에서도 항자력의 제어가 가능하였다. 3. 코발트-철합금신출막은 조성변화에 의하여 자기특성을 제어할 수 있다. 또 ㅈ포화자화, 항자력도 철을 석출한 자성막에 비해서 높은 값을 나타냄을 물론, 우수한 각형화(Mr/Ms)로 얻어지는 큰 자기에너지적으로 수직 자기기록방식의 고정밀의 로타리 엔코다에의 응용이 유망하다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.3
• /
• pp.231-237
• /
• 2000

The commercial cermet cutting tools consist of multi-carbide and a binder metal of iron group, such as cobalt and nickel which are ferromagnetic. In this paper, a new approach to evaluate the mechanical properties of TiCN based cermet by magnetic properties were studied in relation to binder content and sintering conditions. The experimental cermet was prepared using commercial composition with the other binder contents by PM process. It was found that the magnetic properties of the sintered cermets remarkably depended on the microstructure and the total carbon content. The magnetic saturation was proportional to increment of coercive force. At high carbon content in sintered cermet, the magnetic saturation was increased by decreasing the concentration of solutes such as W, Mo, Ti in Co-Ni binder. As the coercive force increases, the hardness usually increases. The strength and toughness of the cermet also increased with increasing the magnetic saturation. The measurement of magnetic properties made it possible to evaluate the mechanical properties in the cermet cutting tools.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1994.03a
• /
• pp.18-19
• /
• 1994

• Journal of the Korean Magnetics Society
• /
• v.9 no.4
• /
• pp.190-195
• /
• 1999

The crystallographic and magnetic properties of the system of $Fe_{1-x}Co_x$(x=0.2 and 0.4) prepared by microwave arc-melting with the maximum power of 3.5 kW and a iron-foil with thickness of 25 ${\mu}{\textrm}{m}$ have been studied by the methods of X-ray diffraction and the measurement of the magnetic hysteresis using the vibrating sample magnetometer at room temperature. The samples were prepared in three different ways: First, pellet form pressed under the pressure of 9,000 N/$\textrm{cm}^2$. Second, the sheet cold rolled. Third, thin sheet treated with the temperature of 90$0^{\circ}C$. The X-ray diffraction pattern of the sample prepared by the first method shows that the crystal structure of the sample is bcc as same as that of Fe with a good uniformity. The iron-foil has the coercivity of 43 Oe and the initial slope of magnetization of 0.328 emu/gOe. The coervicity and magnetization of the sample prepared by the second method increased as the Co content increased. But the initial slop of the magnetization decreased as the Co content increased. This means that the displacement of domain wall is suppressed by the increases of coercivity as the Co content increased. The saturation magnetization of the samples made by the third method increased. On the other hand, the coercivity of these samples decreased. The increase of saturation magnetization of the samples seems to be related to the changes in X-ray intensity after heat treatment. Also some magnetic parameters of the samples were calculated by using a simple model and compared with other values.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.305-307
• /
• 2012

제주 강정항 대상선박인 15만톤급 초대형 크루즈선(Queen Mary 2)의 안전 입출항 여부를 판별하기 위하여 항로 중심선 교각을 30도로 변경 풍속을 최대 27노트까지 적용하여 선박조종시뮬레이션을 수행하였다. 시뮬레이션 분석 결과 남방파제 부두는 별다른 문제없이 초대형 크루즈선의 안전한 입출항이 가능하였다. 서방파제 부두는 풍속 20knots까지는 안전성이 확보 되었으나, 풍속 27노트 조건에서는 서측 돌제부두를 축소 조정하거나 가변식으로 변경할 경우 안전성이 더욱 향상되는 것으로 판별되었다. 또한 현행 1.5L 미만에서도 충분하게 180도 선회가 가능함이 검증되었고, 자력으로 안전하게 운항할 수 있는 풍속 범위는 20노트로 판별되었으나 비상사태에 신속하게 대응하고 안전성 향상 차원에서 상시 대마력 예선 2척을 운용할 필요가 있다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.113-122
• /
• 2016

In this study, the dispersion process of pollutant substances in a port under wave and current environments was evaluated by a hydraulic experiment. Once the contaminants washed ashore into the port of Wolseong nuclear power plant, transport processes of pollutants were investigated by tracking the tracer according to the variations of experimental condition through a hydraulic experiment. Several hydraulic experiments were performed to analyze the pollutant discharge rate of the surface coming from the different coastal environments. From the hydraulic experiment results, the tracer concentration decreased exponentially. These results suggested that, after the tracer was transported to the open sea, a different gradient was shown under different conditions. For the case of a diluted condition, the half-life of flow rate was 2.70, 10.40, and 26.39 days for 30, 20 and 10 rpm in the left-side, respectively. The decrease of the tracer concentration under conditions of 30 rpm was much faster than that under conditions of 10 rpm. For the wave condition, the half-life of flow rate was 4.59 and 15.35 days for the right and left side of the port in a hydraulic scale prototype, respectively.

• Korean Security Journal
• /
• no.26
• /
• pp.59-87
• /
• 2011

Security Business Act of Korea is leaning toward the aspect of regulation, while it provides few provisions about vesting the authority, which causes problems such as legal loopholes to be raised in regard to the rules about authorizing the private security personnel to perform security affairs properly and defining the limit of power. So, it should be done to interpret the law in order to draw the legal basis of empowering as well as to set limits of the authority of security main agent, and Article 7, Section 1, of Security Business Act is the very provision that involves the legal basis. In the scope of 'Management Power', the statutory authority in the first clause of Article 7 of Security Business Act, the security personnel can use force for self-defense, defense of others and property, and prevention of crimes. In addition, the powers of interrogation, access control, and eviction notice are involved in its scope. The private security personnel as the occupation assistant can take precautions and if the infringement on the benefit and protection of the law is imminent or done, he or she can use force within the limits of the passive resistance and the means of defiance on the basis of 'Management Power'. The private security personnel, however, can exercise the force only if the necessary conditions of legal defense, emergency evacuation, and legitimate act of criminal law are fulfilled.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.1
• /
• pp.29-42
• /
• 2003

The KSR-3 magnetometers consist of the fluxgate magnetometer (MAG/AIM) for acquiring the rocket flight attitude information, and the search-coil magnetometer (MAG/SIM) for the observation of the Earth's magnetic fluctuations. The position (latitude, longitude, and height) and flight condition (the transformation angle) of the rocket is measured after the data based on these two magnetometers are compared with IGRF The gap in the vector of magnetic field between the position of the launching point and an impact point is taken into account in data reduction. Angular variation of pitch, yaw, and roll can be researched when the data is applied to the coordinate system of the rocket.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.104-111
• /
• 2005

Dmitri Donskoi, the Russian cruiser launched in 1883, is known to have sunk near Ulleung Island (East Sea, Korea) on May 29, 1905, while it was participating in the Russo-Japanese War. In order to find this ship, information about its possible location was obtained from Russian and Japanese maritime historical records. The supposed location of the ship was identified, and we conducted a five-year geophysical survey from 1999 to 2003. A reconnaissance three-dimensional topographic survey of the sea floor was carried out using multi-beam echo sounder, marine magnetometer, and side-scan sonar. An anomalous body identified through the initial reconnaissance survey was identified by a detailed survey using a remotely operated vehicle, deep-sea camera, and the mini-submarine Pathfinder. Interpretation of the acquired data showed that the ship is hanging on the side of a channel, at the bottom of the sea 400 m below sea level. The location is about 2 km from Port Jeodong, Uleung Island. We discovered 152 mm naval guns and other war materiel still attached to the hull of the ship. In addition, the remnants of the steering gear and other machinery that were burnt during the final action were found near the hull. Strong magnetic fields, resulting from the presence of volcanic rocks in the survey area, affected the resolution of the magnetic data gathered; as a result, we could not locate the ship reliably using the magnetic method. Severe sea floor topography in the gully around the hull gave rise to diffuse reflections in the side-scan sonar data, and this prevented us from identifying the anomalous body with the side-scan sonar technique. However, the sea-floor image obtained from the multi-bean echo sounder was very useful in verifying the location of the ship.