• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.171-182
• /
• 2018

Papaya (Carica papaya L.) is one of the crops widely planted in tropical and subtropical areas. The papaya fruit has low calories and are plentiful in vitamins A and C and in minerals. A major problem in papaya production is a plant disease caused by the papaya ringspot virus (PRSV). The first PRSV-resistant GM papaya expressing a PRSV coat protein gene was developed by USA scientists in 1992. The first commercial GM papaya cultivars derived from the event was approved by the US government in 1997. Development of transgenic papayas has been focused on vaccine production and limited agricultural traits, including insect and pathogen resistance, long shelf life, and aluminum and herbicide tolerance. Approximately 17 countries, including the USA and China, produced transgenic papayas and/or commercialized them, which provoked studies on biosafety assessment and development of GM-detection technologies. For the biosafety assessment of potential effects on human health, effects of long-term feeding to model animals have been studied in terms of toxicity and allergenicity. Studies on environmental safety assessment include influence on soil-microbial biodiversity and transfer to soil bacteria of GM selection markers. Many countries, such as Korea, the European Union, and Japan, that have strict regulations for GM crops have serious concerns about unintended introduction of GM cultivars and food commodities using unauthorized GM crops. Transgene- and/or GM event-specific molecular markers and technologies for genomics-based detection of unauthorized GM papaya have been developed and have resulted in the robust detection of GM papayas.

• Journal of Life Science
• /
• v.18 no.2
• /
• pp.241-248
• /
• 2008

This study has been carried out to secretion antibodies for the purpose of preventing the infection of Helicobacter pylori and using them as a supplement for treatment. This experiments have been separated antigens from H. pylori and observed into antibody production and the agglutination of H. pylori for the separated antigens. As major antigenic proteins separated from H. pylori, the following could be verified: 12 kinds of band for whole cell (WC), seven kinds of band for outer membrane protein (OMP), three kinds of band for crude urease, and one kind of band for lipopolysaccharide (LPS). The IgG anti-H. pylori antibody of separated antigens showed $77.9{\pm}6.4{\mu}g/ml$ for we (L), $84.9{\pm}6.4{\mu}g/ml$ for OMP, and $123.8{\pm}2.9{\mu}g/ml$ for crude urease, at the same antigen concentration of $20{\mu}g/100ull$, which showed the most at the crude urease. And it turned out that the IgA antibodies were generated with $2.5{\pm}0.32{\mu}g/ml$ for WC (L), $2.0{\pm}0.43{\mu}g/ml$ for OMP, and $1.3{\pm}0.25{\mu}g/ml$ for crude urease, which demonstrated the most for WC (L) antigens. As a result of verifying the immunogenecity of antigenic protein through the Western blotting, major antigenic substances could be confirmed as follows: 10 kinds for WC, six kinds for OMP and three kinds for crude urease. The agglutination values on the H. pylori of the antibody were $2^5,\;2^5,\;2^6\;and\;2^7$ at the antigen serums of anti-WC (H), anti-WC (L), anti-OMP and anti-crude urease, respectively, which indicated the highest for the antigen serum of anti-crude urease. The urease activation-inhibiting absorbance of antigen serum created by each antigen was $0.14{\pm}0.01$ for WC (H), $0.16{\pm}0.01$ for WC (L), $0.18{\pm}0.03$ for OMP, and $0.18{\pm}0.04$ for urease, demonstrating a significant inhibiting effect, compared with $0.26{\pm}0.02$ of the control group.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.1
• /
• pp.19-35
• /
• 2014

A parametric sensitivity to the annual exposure dose rate to the farming exposure group has been probabilistically carried out for three principal elements associated with the nuclide transport behavior in the near-field of the pyroprocessed waste repository system. Credit time for both metal and ceramic containers, annual nuclide release rete, and the degree of loss of bentonite buffer around the container are selected as the elements and investigated for important nuclides. All the elements are shown to be sensitive to the results. Methodology studied through this study and the results are expected to make a good feedback to the repository design. As a follow-up study, separated in Part 2, the A-KRS will be deterministically assessed and then compared among each other with the normal, the worst, and the best case scenarios associated with their extreme values these elements could have.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.367-380
• /
• 2014

Tsunami take away life, wash houses away and bring devastation to social infrastructures such as breakwaters, bridges and ports. The targeted coastal structure object in this study can be damaged mainly by the tsunami force together with foundation ground failure due to scouring and liquefaction. The increase of excess pore water pressure composed of oscillatory and residual components may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, the solitary wave was generated using 2D-NIT(Two-Dimensional Numerical Irregular wave Tank) model, and the dynamic wave pressure acting on the seabed and the estimated surface boundary of the vertical revetment. Simulation results were used as an input data in a finite element computer program(FLIP) for elasto-plastic seabed response. The time and spatial variations in excess pore water pressure, effective stress, seabed deformation, structure displacement and liquefaction potential in the seabed were estimated. From the results of the analysis, the stability of the vertical revetment was evaluated.

• Journal of fish pathology
• /
• v.10 no.2
• /
• pp.165-176
• /
• 1997

Water samples collected from marine fish culture system in Korea were compared for their capability to reduce the infectivity titers of HRV (rhabdovirus olivaceus), FBV(flounder birnavirus) and RVS(retrovirus of salmonid). In addition, interaction between viruses and microorganisms present in the rearing seawater was examined. The titer of HRV and RVS were reduced at $15^{\circ}C$ to less than detectable limits within 3 to 5 days using untreated samples of seawater. No reduction of infectivity was noted in bacteria-free water treated by filtration or autoclaving. Bacteria (Pseudomonas and Vibrio sp.) isolated from the water collected from a flounder culture system showed the inactivation activity of HRV.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.1
• /
• pp.63-77
• /
• 2015

Tsunami take away life, wash houses away and bring devastation to social infrastructures such as breakwaters, bridges and ports. The coastal structure targeted object in this study can be damaged mainly by the wave pressure together with foundation ground failure due to scouring and liquefaction. The increase of excess pore water pressure composed of oscillatory and residual components may reduce effective stress and, consequently, the seabed may liquefy. If liquefaction occurs in the seabed, the structure may sink, overturn, and eventually increase the failure potential. In this study, the bore was generated using the water level difference, its propagation and interaction with a vertical revetment analyzed by applying 2D-NIT(Two-Dimensional Numerical Irregular wave Tank) model, and the dynamic wave pressure acting on the seabed and the surface boundary of the vertical revetment estimated by this model. Simulation results were used as input data in a finite element computer program(FLIP) for elasto-plastic seabed response. The time and spatial variations in excess pore water pressure ratio, effective stress path, seabed deformation, structure displacement and liquefaction potential in the seabed were estimated. From the results of the analysis, the stability of the vertical revetment was evaluated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.689-696
• /
• 2018

System grounding is applied to the neutral point of a power source to secure the from any abnormal voltage and/or grounding fault. System grounding, which is applied mainly in ships is an ungrounded and resistance grounded system. Vessels using the MV power system with 3.3kV, 6.6kV, and 11kV mainly adopt a high resistance grounding system among the resistance grounding systems. The ground fault accounts for 95% of all faults occurring in the electrical system and when a fault occurs, the line-to-ground voltage of the power system is increased excessively, which adversely affects the onboard insulation system. This study analyzed the variation characteristics of the line-to-ground voltage neutral point according to the degree of ground fault in a resistance ground system applied in vessels. For this purpose, the characteristics of the grounding system were first explained, and the modeling of the neutral point potential of the line-to-ground voltage of the resistance grounding system in the vessels was derived. Finally, this study examined how the line-to-ground voltage, line voltage, and neutral point change according to various variable environments through MATLAB simulations.

• Journal of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.195-204
• /
• 1982

Semi-empirical MO calculations, EHT, CNDO/2, MINDO/3, and MNDO met hods, were performed on various geometries of n-butane, n-alkyl radical and tetramethylene diracal (triplet) in order to compare eigenvalue and eigenvector properties with those obtained by STO-3G method. All methods predicted the same relative order of stabilities of various geometries for n-butane; geometrical preferences were found to be dominated by one-electron factor, ${\pi}$-orbital energy changes being more impotant in the semi-empirical methods. The hyperconjugative energy changes accompanying structural changes from $(n-{\sigma}{\ast})_{trans}$ to (n-{\sigma}{\ast})cis were underestimated in the EHT, CNDO/2 and MINDO/3, whereas those were overestimated in the MNDO. The net destabilizing effect of $(n-{\sigma}{\ast})_{trans}$ structure was mainly due to the large internuclear energy involved in the structure. Through-space interaction between $n_1$ and $n_2$ orbitals of diradical caused energy gap narrowing of ${\Delta}E_{sp}$ and ${\Delta}{\varepsilon}={\varepsilon}_0$-${\varepsilon}_{av}$; through-space interaction had opposing effect to that of through-bond interaction. Due to the less severe neglect of differential overlaps in the MNDO, this energy gap narrowing effect appeared amplified in the MNDO. In general orbital properties were found to be reproduced satisfactorily, but eigenvalue properties were not, in all the semi-empirical methods especially when ${\sigma}-{\sigma}{\ast}$ and n-$n-{\sigma}{\ast}$interactions were involved.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.671-675
• /
• 2002

The present study was conducted to elucidate functional properties of sulfated polysaccharides from ascidian tunics, In physical properties of the crude polysaccharides, emulsion ability and foaminess were more excellent compared with chitin and chitosan, particular dye binding capacity was prominent. Anti-blood coagulation of partially purified sulfnted polysaccharides showed with respect to APTT (Activated partial thromboplastin time). Especially, active fraction $(F_4)$ obtained by DEAE-cellulose ion exchange chromatography showed highest activity, which was approximately $20\%$ of the activity of heparin. ACE inhibitory activity also similar to anticoagulant activity. Active fraction $(F_4)$ obtained by DEAE-cellulose ion exchange chromatography showed about $34\%$, in ACE inhibitory activity.

• Journal of Plant Biotechnology
• /
• v.40 no.3
• /
• pp.169-177
• /
• 2013

Recently, the number of people with diabetes is rapidly increasing, coupled with the fact that the insulin market is remarkably increasing. Therefore, molecular farming for plant-derived pharmaceutical protein production is reported as becoming more attractive than ever. In this study, we carried out experiments step by step for development of recombinant insulin constructs, which were transformed into E. coli system, in vitro transcription and translation system, and tobacco cells. At first, recombinant proinsulin protein was successfully produced in in vitro transcription and translation system with wheat germ extract. After which, recombinant construct of prominiinsulin encoded a fusion protein of 7.8 kDa with trypsin cleavage sites at N terminus and C terminus of minimized C-peptide was tried to in vitro expression using E.coli culture. After purification with His-tag column, the resulting recombinant prominiinsulin protein was processed with trypsin, and then checked insulin biosynthesis by SDS-PAGE and western blot analysis with anti-insulin monoclonal antibody. The immunoreactive product of trypsin-treated miniinsulin was identical to the predicted insulin hexamer. The construct of 35S promoter-driven preprominiinsulin recombinant gene with signal peptide region for ER-targeting and red fluorescence protein gene [N terminus ${\rightarrow}$ tobacco E2 signal peptide ${\rightarrow}$ B-peptide (1-29 AA) ${\rightarrow}$ AAK ${\rightarrow}$ A-peptide (1-21 AA) ${\rightarrow}$ RR ${\rightarrow}$ His6 ${\rightarrow}$ KDEL ${\rightarrow}$ C terminus] was transformed into BY-2 tobacco cells. A polypeptide corresponding to the 38-kDa molecular mass predicted for fusion protein was detected in total protein profiles from transgenic BY-2 cells by western analysis. Therefore, this recombinant preprominiinsulin construct can be used for generation of transgenic tobacco plants producing therapeutic recombinant insulin.