• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.42-42
• /
• 2015

사행수로에서의 원심력은 비선형적인 압력분포를 야기하여 이차류, 편수위 등과 같은 불규칙하고 복잡한 흐름을 발생시킨다. 일반적으로 이들 흐름은 난류이고 매우 3차원적이며 자유수면과의 상호작용이 중요한 역할을 할 수도 있다. 환경, 유사이동, 지형 변화와 관련된 환경 수리학적 관점에서 사행수로에서의 흐름을 이해하고 설계하기 위해서는 이러한 복잡한 3차원 흐름을 정확하게 계산하는 것이 매우 중요하다. 이 연구에서는 유한차분법에 근거한 3차원 흐름해석 모형을 이용하여 사행수로에서의 난류 흐름을 모의하고자 한다. 지배방정식은 3차원 비정상 RANS(Reynolds averaged Navier-Stokes) 방정식이며, 난류 해석을 위해서 공학적으로 널리 이용되고 있는 난류 모형 중 k-omega 모형을 이용한다. 수치모형은 시간과 공간에 대해서 2차 정확도의 이산화 기법을 적용한다. 자유수면의 변동은 이상(two-phase) VOF (volume of fluid) 기법을 이용하여 계산한다. 수치모형의 적용 대상은 기존 문헌에서 제시되어 있는 키노시타 사인곡선을 이용하여 만든 폭 60cm의 사행수로에서 후르드수 0.23 그리고 레이놀즈수 41,700의 조건에서 발생시킨 난류 흐름이다. 적용한 난류모형들을 이용하여 해석한 결과들을 유속벡터분포와 수위의 항으로 비교분석하여 사행수로에서 발생되는 이차류와 편수위 변화 재현에 대한 수치모형의 적용성을 평가하고 각 난류모형들의 특성을 제시한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.376-376
• /
• 2015

거주지나 공장부지와 같은 이용 가능한 토지를 만들기 위하여 해안 지역을 매립하는 토목공사가 전세계 곳곳에서 이루어지고 있다. 매립공사에서 매립토량의 결정은 경제성 부분에서 매우 중요하나 국내는 어항 항만 설계기준(2014)에 의하여 단순히 입경별로 유실율과 유보율을 산정하여결정하고 있는 실정이다. 따라서 본 연구에서는 원형의 매립호안 주변의 유사 거동을 분석하기 위하여 수리실험을 통한 연구를 진행하였다. 수리실험은 길이 13.0 m, 폭 5.0 m, 수위 0.10 m의 직사각형 단면의 개수로에서 수행되었으며, 실험에 사용된 유사는 주문진사($d_{50}=1.0mm$)와 안트사이트($d_{50}=0.44mm$)를 사용하였다. 원형 호안은 방수처리가 되어있는 목재로 제작하였고 두 가지 유사 모두 매립지역에서 형성되는 모래의 형상은 차이를 보였고 일정량의 유사가 호안 하류측에 쌓이는 것으로 나타났다. 선행 연구와 달리 호안에서 형성되는 모래의 이송된 형상을 관측하였다. 향후 모래 유입 위치를 달리하여 퇴적된 모래의 형성을 정량적으로 관측이 가능하다면 매립공사의 경제성을 높일 수 있을 것이라 기대된다.

• Journal of Korean Society of Archives and Records Management
• /
• v.5 no.1
• /
• pp.79-105
• /
• 2005

This study is that the name from Tagjijunjeol is compared with the actual papers used in historical documents. I have selected the families having had influencing power in Gyungi-Do(京畿道), Gyungsang-Do(慶尙道), Jeonra-Do(全羅道), Chungcheung-Do(忠淸道), and analyzed 1504 articles of historical documents owned by those families. I checked up each papers used in historical documents in it's shape of screens, density, raw material. I cannot find the feature of it's region, but prominent feature according to the types and period of historical documents. At first, I have surveyed the impressions of screen marks in papers. The number of strips can be divided into two cases, around 10 and around 17. The case around 17 is similar to the number seen in the book paper of the early Joseon Dynasty, but the case around 10 is rare. Dard Hunter said in his book, published in 1933, that screens were made of Korean grass(Miscanthus sp.) at that time in Korea. I guess the impressions of screen marks of the case around 10 was made of Korean grass, Miscanthus sp.. The case around 10 and the case around 17 were not different in period, but the contemporary appearance. However, if we look into the change of strips' number, we can learn that it becomes more dense as time goes by. The intervals of hair stitch, contrary to book paper, have appeared irregularly and a short hair stitch was frequently found between long hair stitches. This was the result of fastening extra stitch to increase the firmness of strips, as the part of screens which was frequently touched by hands would wear out easily. Then, have look into the density. Each kinds of historical documents had a wide range of density. But the average have had relationship with the kinds of paper written in Tagjijunjeol. The historical documents having the same item of paper have kept similar densities. From the density variation of Gosingyoji(告身敎旨), the letter of appointment the official rank over 5 by king, based on time periods, we can see a great disparity between before and after Imjin-waeran war. Before Imjin-waeran war paper's quality was high, right after Imjin-waeran war went abruptly down, and went gradually up just from 1650's, but since 1700's quality has not risen more, kept the value. On the contrary, the density of Gyocheop(敎牒), the letter of appointment the official rank under 5 by the Ministry of Personnel and the Ministry of Military, have not had a great disparity according to time periods, but had a lower density than Gosingyoji. Joseon Dynasty has strictly divided Gosingyoji appointing the official rank over 5 from Gyocheop appointing the official rank under 5, it seems to distinguish the appointment by king from the appointment by Ijo(吏曹), the Ministry of Personnel and Byeongjo(兵曹), the Ministry of Military.

• The Korean Journal of Air & Space Law and Policy
• /
• v.12
• /
• pp.144-177
• /
• 2000

Our nation have several procedures and law for national airspace management, however those procedures and law not enough to manage airspace. Therefore, I have studied this paper for improving flight safety and for providing economics flight of civcil aircraft and military aircraft, also, for increasing efficiency of airspace through systematic airspace management, additionally, for improving nation defense ability and for preventation our nation damage when occuring airspace problem. Nowaday. in using airspace. two theory which freely use theory and use theory under jurisdiction is opposed by every nation in worldwide. Consequently. we can realize every nation endeavour to increase their jurisdiction airspace. However. our nation is not still prepared to cope with other nation when occuring airspace trouble. because airspace definition is not prescribed on our aviation law. Therefore. several problems which are improved in our airspace management are presented on this paper. The presented matters are as follows. First, The airspace definition is not prescribed on aviation law and responsibility limit of airspace management is ambugious. Second. problem on structure of approach control area and special airspace, Third. problem on airway system. Fourth. civil agency and military agency apply respectively different regulation in establishment of aircraft flight route, To grasp these problems, considered the airspace conception, airspace classfication. legal character of airspace. our nation airspace state and management together with other nation airspace state and management. also compared our nation airspace management with other nation airspace management. And. improvement methods to solve problems which was appeared by comparing and analysis are presented on this paper.

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.130-134
• /
• 1993

The magnetic properties of the amorphous $Fe_{73.5-X}Co_{X}Cu_{1}Nb_{3}Si_{13.5}B_{9}(x=2,\;4)$ alloys, fabricated by a single roll rapid quenching technique and annealed at $400~650^{\circ}C$, have been investigated. The optimum annealing temperature is $550^{\circ}C$ for the amorphous $Fe_{71.5}Co_{2}Cu_{1}Nb_{3}Si_{13.5}B_{9}$ alloy. The properties of the nanocrystalline $Fe_{71.5}Co_{2}Cu_{1}Nb_{3}Si_{13.5}B_{9}$ alloy show the relative permeability of $1.1{\times}10^{4}$ and the coercive force of 0.22 Oe at 1 kHz. When annealed at $600^{\circ}C$, the nanocrystalline $Fe_{69.5}Co_{4}Cu_{1}Nb_{3}Si_{13.5)B_{9}$ alloy shows the relative permeability of $1.0{\times}10^{4}$ and the coercive force of 0.19 Oe at 1 kHz. From the X-ray measurement, it is found that the remarkably improved soft magnetic properties are the effect of the formation of $\alpha$-Fe(Si) grain. By the results of FMR exper-imeIlt, the optimum annealing condition is just below temperature which the peak-to-peak line width of FMR spectrum increase rapidly.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.160-165
• /
• 2009

Contact dermatitis is induced by allergy response from a lot of chemical substances brought on by environmental contamination. In this study, we investigated allergy prevention effect of baicalein which is Scutellaria radix extract. Scutellaria radix is the dried roots of Scutellaria baicalensis Georgi (Labiatae). It has been used in oriental traditional medicine for treatment of fever, diarrhea and inflammation. We have induced allergy by PCL after oral administration of 0 mg/kg, 50 mg/kg or 100 mg/kg baicalein dose for 8 times during 8 days in BALB/c mice and measured ear thickness, IgE level, histamine level, mast cell number and histopathological changes. The ear thickness of the 100 mg/kg baicalein group was thinner than that of the 0 mg/kg baicalein group. IgE level and histamine level of the 100 mg/kg baicalein group were lower than those of 0 mg/kg baicalein group. The number of mast cells of 0 mg/kg baicalein group more than that of 100 mg/kg baicalein group in the ear tissue. In addition, intradermal edema with prominent inflammatory cell infiltration was observed at 0 mg/kg baicalein group more than 100 mg/kg baicalein group in the ear tissue. These results suggest that baicalein has allergy prevention effect in BALB/c mice.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.3
• /
• pp.115-125
• /
• 2001

To examine the movement of the freshwater discharged artificially into the estuary during ebbing period in the Keum River dike we observed surface salinity variations in three stations along the estuary channel in May 1998 and July 1997 and surface temperature and salinity along the ferry-route between Kunsan and Changhang during eighteen days in July 1999. Based upon the typical features of observed salinity variation, we analyzed the excursion and decay processes of the discharged water. When freshwater is discharged, the low-salinity water forms strong salinity front over the entire estuary width, which basically moves forth and back by tidal modulation along the channel, producing the sudden change of surface salinity with the front passage. Salinity distribution along the channel, which is deduced from time variation of mean salinity over the estuary width, after one tidal period from gate operation suggests that diluted low-salinity water is trapped to the front and surface salinity increases gradually toward the upstream region. This frontal distribution of salinity is interpreted to be produced by the sudden gate operation supplying and stopping of freshwater within about two hours. Daily repeat of freshwater discharge produces separation (double front) or merge between decaying and new-generated fronts depending on dike-gate opening time, and the front decays with salinity increasing if the freshwater supply is stopped more than two days. In addition, the observed fluctuations and deviations in surface salinity variation is explained in terms of the differences of fronts intensity, their transition time and temporal salinity front running along the channel, which can be generated due to artificial gate-operation for the discharging time and water volume in the estuary dike.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.331-339
• /
• 2020

In this study, ways to reduce the edge pressure at the bottom plate of the caisson breakwater were considered. The water depth, freeboard, design wave height and period, and the location of the center of gravity on the super-structure of the breakwater were selected as key design variables that influence the edge pressure, and analyzed how the edge pressure changes according to the change of this key variables. The pressure distribution formulae suggested in the design standard was applied for the calculation of design wave forces. Based on the wave forces, the required effective self-weight of the super-structure and the minimum width of the caisson were determined to have a safety factor of 1.2 against sliding and overturning. From the results, it was found that the edge pressure rapidly increased as the water depth increased, and could exceed the allowable bearing capacity when it reached a certain water depth which is 20 m within the analysis conditions. It was also confirmed that the edge pressure gradually increased linearly as the freeboard increased, but decreased with the increase of the wave height and period. This edge pressure could be significantly reduced up to more than 20% by moving the center of gravity of the super-structure to the seaside, which is 5% of the caisson width. Based on the analysis results and the recently conducted research results, a method was proposed to reduce the edge pressure that can be used in the design.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.2
• /
• pp.92-99
• /
• 1991

A moored body in the sea is subjected to second-order wave forces as well as to linear oscillatory ones. The second-order farces contain slowly-varying components, of which the characteristic frequency can be as low as the natural frequency of horizontal motions of the moored body. As a consequence, the slowly-varying force can excite unexpectedly large horizontal excursion of the body, which may cause a serious damage on the mooring system. In design analysis of Turret-type mooring system which is one of the interesting mooring systems for a floating body. the slowly-varying drift forces and the transient motion of the system during weathervaning are very important. In this paper the slowly-varying drift forces were calculated by using the Quadratic Transfer Function with considering the second order free-wave contributions. Additionaly the transient surge motion of the moored body was simulated with including the roll of the time-memory effect. In this simulation the spring constant of the spread Turret mooring system is updated at every time step for considering the nonlinear effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.3
• /
• pp.221-230
• /
• 1996

The Suh and Park's analytical model. originally developed to calculate wave reflection from a conventional fully perforated caisson breakwater, is applied to a partially perforated caisson breakwater by approximating the vertical wall of the lower part of the front face of the caisson as a very steep sloping wall. Also, in the model, the inertial resistance term at the perforated wall is modified by using the blockage coefficient proposed by Kakuno and Liu. The model is compared against the hydraulic experimental data reported by Park et al. in 1993. Both the experimental data and the analytical model results show that the influence of inertial resistance is important so that wave reflection becomes minimum when B/L. is approximately 0.2 (in which R : wave chamber width, and 1, : wave length inside the wave chamber), which is somewhat smaller than the theoretical value B/L, : 0.25 obtained by assuming that the influence of inertial resistance is negligible. It is also shown that the analytical model based on a linear wave theory tends to overpredict the reflection coefficient as the wave nonlinearity increases, thus the model is preferably to be used for ordinary waves of small steepness.