• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.49-58
• /
• 2012

Buildings become complex and diverse with time. It is difficult to extract individual buildings using only an optical image, because they have similar spectral characteristics to objects such as vegetation and roads. In this study, we propose a method to extract building area and boundary through integrating airborne Light Detection and Ranging(LiDAR) data and aerial images. Firstly, a binary edge map was generated using Edison edge detector after applying Adaptive dynamic range linear stretching radiometric enhancement algorithm to the aerial image. Secondly, building objects on airborne LiDAR data were extracted from normalized Digital Surface Model and aerial image. Then, a temporary building areas were extracted by overlaying the binary edge map and building objects extracted from LiDAR data. Finally, some building boundaries were additionally refined considering positional accuracy between LiDAR data and aerial image. The proposed method was applied to two experimental sites for validation. Through error matrix, F-measure, Jaccard coefficient, Yule coefficient, and Overall accuracy were calculated, and the values had a higher accuracy than 0.85.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.419-424
• /
• 2009

This paper show about the possibility of practical application after building VR(virtual reality) data based on Airborne LiDAR data which determines complicated topography quickly for the 3D-GIS construction. In this paper, we collected Airborne LiDAR data, digital map, serial photo and a basic design. The results are expected some effective determination by 3D-GIS construction based on LiDAR data. Hereafter, because the research will be able to be given quickly topography information on ubiquitous environment the field of construction and GIS will be able to be helped.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.394-399
• /
• 2003

도시 지역의 대부분을 차지하는 건물에 대한 3차원 정보는 도로, 교통 등의 시설물관리시스템 구축, 도로계획, 택지개발, 도시계획 등 여러 분야에 필요하다. 현재 항공사진, 고해상도 위성영상, LiDAR 자료, 수치사진측량 시스템 등의 보급과 분석 알고리즘의 발전으로 인하여 도시지역 건물 3차원 모델링에 대한 연구가 활발히 진행되고 있는데, 그 중에서 정밀한 DSM 취득이 가능한 LiDAR 자료가 도시지역 건물 3차원 모델링에 가장 유망한 자료이다. 그러나 LiDAR 자료만을 이용할 경우에는 선형화 과정 등의 수작업이 많이 들어가고, 주관적인 재구성과정이 들어가야 하는 문제점이 있다. 따라서 본 연구에서는 수치지도를 LiDAR 자료와 같이 이용하여 건물 3차원 모델링시 작업자의 수동적인 과정을 단축하였다. 항공사진과 해석도화기를 이용한 정확도 평가 결과 1:5,000 수치지도 정확도 규정을 만족하는 도시지역 건물 3차원 모델링이 가능하였고, 비교적 자동화된 공정을 이루었다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.174-187
• /
• 2011

The flowed soil is able to be estimated from topographic data of before and after the debris flow. However, it is often difficult to obtain airborne LiDAR data before the debris flow area. Thus, this study tries to develop a topographic restoration method that can provide spatial distribution of flowed soil and reconstruct the topography before the debris flow using airborne LiDAR data. The topographic restoration method can express a numerical formula induced from a Gaussian mixture model after extracting the cross sections of linear or non-linear in debris flowed area. The topographic restoration method was verified by two ways using airborne LiDAR data of before and after the debris flow. First, each cross section extracted from the debris flow sites to restore the topography was compared with airborne LiDAR data of before the debris flow. Also, the topographic data produced after the topographic restoration method applied to the debris flow sites was verified by airborne LiDAR DEM. Verifying the results of the topographic restoration method, overall fitting accuracy showed high accuracy close to 0.5m.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.1 s.39
• /
• pp.67-73
• /
• 2007

Recently, three-dimensional (3D) GI (Geospatial Information) using LiDAR system has been used various fields such as the production of digital map, the modeling of 3D building and urban area, and analysis of communication network and environmental effect. In this study, the production cost of digital map by aerial LiDAR surveying were compared with the cost by aerial photograph surveying for analysis of economical efficiency. It is expected that the results of this study will be used base data for production, update, revision of digital map and curtail effect of national budget.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.545-553
• /
• 2009

Digital Elevation Models (DEM) is widely used in establishing the topographic profile in nation spatial information. Aerial Light Detection And Ranging (LiDAR) system is one of the well-known means to produce DEM. The system has fast data acquisition procedures and less weather-dependent restrictions compared to photogrammetric approaches. In this regards, LiDAR has been widely utilized and accepted in the process of nation spatial information generation due to its sufficient positional accuracy. However, the investigation of the accuracy of aerial LiDAR data over the area of forestation with various kinds of vegetations has been barely implemented in Korea. Hence, this research focuses on the investigation of the accuracy of aerial LiDAR data over the area of forestation and the evaluation of the acquired accuracy according to the characteristics of the vegetations. The study areas include land with shrubs and its adjacent forest area with mixed tree species. The spots for the investigation have been selected to be well-distributed over the whole study areas and their coordinates are surveyed by Global Positioning Systems (GPS). Then, the surveyed information and aerial LiDAR data have been compared with each other and the result accuracy has been evaluated. Conclusively, it is recommended that LiDAR data collection to be conducted after defoliation period, especially over the areas with broadleaf trees due to the possibility of significant outliers.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.119-124
• /
• 2004

LiDAR 자료를 이용한 지형 및 공간 정보 자료를 구축하기 위해서는 LiDAR 자료의 오차 보정, 건물영역 및 지면 분리, 건물 및 지형의 재구성 등의 과정이 필요하다. 그 중에서 건물영역 분리 과정은 막대한 양의 LiDAR 자료에 대한 직, 간접적인 처리를 필요로 하며 결과물의 품질에도 큰 영향을 미친다. 본 연구에서는 LiDAR 자료로부터 건물 영역을 분리해 내기 위하여 LiDAR 원 자료를 그대로 활용하는 방식을 제안하였다. 항공레이저측량은 스캔라인을 따라 취득되는 포인트정보를 순서대로 저장하여 제공하므로 LiDAR 자료로부터 연속적으로 입력되는 포인트들은 서로 인접할 가능성이 높다. 이와 같은 특성을 이용하여 유사한 고도 값을 갖는 인접 포인트들로 클래스를 형성하고 새로운 포인트가 속할 클래스를 검색하여 편입시킴으로써 건물영역을 분리해 낸다. 아울러 각 건물 클래스에 대한 레이블링도 자동적으로 수행하며 새로운 포인트가 편입될 클래스를 검색하는 방법에 있어서도, 클래스의 검색 순서와 클래스의 자료 구조를 효율적으로 운용함으로써 성능 향상을 도모하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.13-15
• /
• 2008

LiDAR(Light Detection and Ranging)는 3차원공간정보를 신속하게 구축할 수 있는 최신 측량 기술로써 최근 그 활용도와 중요성이 높아지고 있다. 그러나 LiDAR 관측성과는 시스템 특성상 높은 수직 정확도를 제공하고 있으나 항공사진과 같이 정확한 평면위치를 측정하여 조정할 수 없으므로 상대적으로 낮은 수평 정확도를 가지고 있다. 본 연구에서는 LiDAR 관측에 의한 건물의 벽면 반사파를 이용하여 건물모서리의 평면 좌표(x, y)를 추출하고, 이를 항공삼각측량에 의한 평면좌표와 비교분석하였다. 그 결과 LiDAR의 평면좌표가 항공삼각측량에 의한 평면좌표에 비해 상대적으로 이동되어 있음을 확인할 수 있었다. 따라서, 2차원 좌표변환을 수행하여 LiDAR의 평면좌표를 보정하여 정확도를 향상시킬 수 있었고, 이를 이용하여 향후 LiDAR 관측성과 품질 향상에 도움이 될 것이라 기대한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.281-292
• /
• 2014

This study examined the accuracy that produced using various types and combinations of landslide-related factors from landslide susceptibility index maps. A database of landslide-related factors was adopted by the landslide locations that obtained from aerial photographs, and the topographic factors that derived from airborne LiDAR observations and digital maps, and various soil, forest, and land cover. Landslide susceptibility index maps were calculated by logistic regression and frequency ratio from the landslide susceptibility index. The correlation between airborne LiDAR data and digital map was shown strong similarities with one another. Landslide susceptibility index maps indicated the existence of a strong correlation and high prediction accuracy, especially when the frequency ratio and airborne LiDAR were used. Therefore, we concluded that the Airborne LiDAR will contribute to the development of effective landslide prediction methods and damage reduction measures.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.547-554
• /
• 2010

This study intends to analyze how long the landfill site will be available by estimating maximum volume of landfill. Preestimated volume was calculated using digital maps and scheme drawings. The latest reclamation volume was measured using the state-of-the-art airborne LiDAR technology. Based on these data. landfill volume of now, carries in volume of past a few years and subsidence rate were calculated. As a result of study, the remaining capacity of this landfill site was estimated that it would be available till 2045.