• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.8
• /
• pp.649-656
• /
• 2013

High-lift devices have a major influence on takeoff, landing and stall performance of an aircraft. Therefore, a slotted flap design optimization process is proposed in this paper to obtain the most effective flap configuration from supported 2D flap configuration. Flap deflection, Gap and Overlap are considered as main contributors to flap lift increment. ANSYS Fluent 13.0.0$^{(R)}$ is used as aerodynamic analysis software that provides accurate solution at given flight conditions. Optimum configuration is obtained by Sequential Quadratic Programing (SQP) algorithm. Performance of the aircraft with optimized flap is estimated using Aircraft Design Synthesis Program (ADSP), the in-house performance analysis code. Obtained parameters such as takeoff, landing distance and stall speed met KAS-VLA airworthiness requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.25-32
• /
• 2006

An advanced method of Relaxed Static Stability (RSS) is utilized for improving the aerodynamic performance of modern version supersonic jet fighter aircraft. The flight control system utilize RSS criteria in both longitudinal and lateral-directional axes to achieve performance enhancements and improve stability. The T-50 advanced trainer employs the RSS concept in order to improve the aerodynamic performance and the flight control law in order to guarantee aircraft stability. The longitudinal two modes are the short period with high frequency and the phugoid mode with low frequency. The design goals of longitudinal control laws is concerned with the short period damping and frequency optimization using lower order equivalent system and utilizing the requirement of MIL-F-8785C. Analysis of short period mode has been and continues to be performed This paper addresses the analysis of aircraft phugoid node characteristics such as damping, natural frequency, and analysis of aircraft pitch motion that impacted by angle of attack limiter and auto pitch attitude control law.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.8
• /
• pp.806-812
• /
• 2010

Fuel tanks for rotorcraft have a great influence on the survivability of crews. The philosophy of crashworthy rotorcraft design evolved from the long term effort of the US Army. US army established MIL-DTL-27422D for specifying detail requirements related to crash resistant fuel tank especially for military rotorcraft to prevent post crash fire which is the greatest threat to life in rotorcraft crash. Crashworthiness of the rotorcraft fuel tank could be guaranteed through the crash impact tests which are specified in the MIL-DTL-27422D. Fuel tanks for Korea Helicopter Program have been developed and tested according to MIL-DTL-27422D with minor modifications of flexible fittings. The present study shows some results of the mandatory crash impact tests of the fuel tanks to verify their performances.

• Defense and Technology
• /
• no.8 s.174
• /
• pp.44-51
• /
• 1993

F-5 성능개량의 근본적인 배경은 경제성입니다. F-16 한대 도입할 가격이면 대략 10대의 F-5 성능개량이 가능하므로 비용 대 효과 측면에서 많은 국가들이 매력을 느끼고 있습니다 또한 선도 훈련기로서의 필요성이 전투기.성능이 급격히 높아짐에 따라, 성능개량되는 F-5 수준의 항공기로 예비훈련을 함으로써, 고성능 전투기의 비전력화 훈련소요를 상당부분 대체할수 있습니다

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.490-498
• /
• 2010

This paper presents an autonomous target tracking approach and technique for transmitting ground control station image periodically for an unmanned aerial vehicle using onboard gimbaled(pan-tilt) camera system. The miniature rotary UAV which was used in this study has a small, high-performance camera, improved target acquisition technique, and autonomous target tracking algorithm. Also in order to stabilize real-time image sequences, image stabilization algorithm was adopted. Finally the target tracking performance was verified through a real flight test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.289-295
• /
• 2015

This paper describes a ground monocular vision-based measurement algorithm measuring relative range and position of aircraft using the information of wingspan and optical parameters for the camera. A technique obtaining an aircraft image is also described in this paper. This technique can be used as external measurement for autonomous landing instead of ILS. To verify the performance of these algorithms, flight experiment is performed using light sport aircraft with GPS and monocular camera. Finally we obtained the reasonable RMSE of 1.85m is obtained.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.371-377
• /
• 2009

The propulsion system of turboprop has been rarely used in the large aircraft due to the limitation of the maximum velocity of the propeller, the power limitation by the reduction gear, etc. Recently, the demand on turboprop aircraft continues to increase because of economical efficiency and environmental factors. In this paper, turboprop propulsion system which is composed of a Pratt & Whitney 127F turboprop engine and a Hamilton Standard 568F propeller was modeled by using the Gasturb11 software. The result of the performance analysis on this propulsion system model showed that the propulsion system model was evaluated to have been successfully builded.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.18-23
• /
• 2022

This paper examines the electromagnetic shielding structure of ultra-high frequency (UHF) RF modules used in aircraft. Advances in electrical and electronic technologies have increased the need for electronic equipment in aircraft. High-frequency wireless devices have become integrated circuits in the form of UHF integrated circuits to support a wide range of frequencies and miniaturisation. To ensure the functionality and performance of these integrated devices in aviation, shielding is necessary to prevent unexpected electromagnetic interference, which could be detrimental to aircraft safety. A shield structure was designed to protect the RF chipset from malfunctioning, and the shielding effectiveness was improved through the application of various geometric shapes.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.1
• /
• pp.37-42
• /
• 2023

In an effort to reduce aircraft noise, noise abatement areas are designated and notified, and noise abatement procedures are implemented. However, residents in noise abatement areas are increasingly complaining about the increase in noise, and airlines are exceeding the criteria for noise. In this study, A330-300 airplane set flight conditions that are predicted to generate the most noise when taking off 32 runway at Gimpo International Airport, and predicted the noise as the NPD curve of the INM and AEDT programs. As a result of the analysis, it was considered that the noise at a specific point would generate higher noise than the noise criteria. Therefore, to avoid exceeding aircraft noise criteria at a particular point, supplementing the departure procedures by reflecting aircraft performance under flight conditions would reduce complaints from both airlines and local residents.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.33-39
• /
• 2006

In this paper, the collision avoidance of Unmanned Aerial Vehicles(UAVs) by applying the Traffic alert and Collision Avoidance System II(TCAS-II) is introduced. The performances of two UAVs whose maximum vertical rates are different each other are compared and analysed by not only converting many TCAS-II commands into an autopilot input but also implementing a computer program based on the Minimum Operational Performance Standards for TCAS-II. As the alternative to a possible Near Mid-Air Collision for UAVs whose maximum vertical rates are low, we have proposed a modified algorithm considering the maximum vertical rate and altitude. The modified algorithm is available on the assumption that a wider surveillance range is provided by a ADS-B system.