• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.682-690
• /
• 1999

The quaternary random copolyesters of poly (butylene glutarate-co-adipate-co-succinate-co-terephthalate)(PBGAST) were synthesized and charaterized by $^1H-NMR$ spectrometry, DSC method, and X-ray diffractometry. Thus the melting point trends and crystallization behaviors of PBGAST copolyesters were obviously depended on terephthalate content in copolymers as well as reaction condition.

• Computational Structural Engineering
• /
• v.9 no.1
• /
• pp.47-54
• /
• 1996

The Control Element Assembly(CEA) shroud is one of the most important components in the reactor vessel internals for the nuclear power plant. Because of the severe modification from its original design the structural integrity of this component has been questioned. In an attempt to resolve this question, the response of the CEA shroud to a random loading in the actual operating condition is calculated analytically and experimentally and compared to the code allowables to show that it is structurally adequate and acceptable for the long term operation.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.79-84
• /
• 1995

핵연료집합체 연소도 계산용 전산코드인 CASMO-3를 도입하여 한국고유핵설계체계를 개발하기 위해서는 CE형 핵연료집합체의 핵적특성을 파악하는 것은 필수적이다. 따라서, CASMO-3와 몬테칼로 전산코드인 MCNP-4A를 이용하여 CE형 16$\times$16 핵연료집합체에 대한 $K_{inf}$ 및 봉출력 분포를 비교 분석하였다. $K_{inf}$ 의 경우는 CASMO-3에 의한 계산 결과가 0.5% 이내에서 MCNP-4A의 계산 결과와 일치하였으며, 봉출력분포의 경우도 제어봉 주변이나 Gd$_2$O$_3$ 독봉을 제외하고는 CASMO-3에 의한 계산 결과가 MCNP-4A의 계산 결과와 거의 일치하는 것으로 나타났다.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.854-859
• /
• 2000

The synthesis of poly(N,N-dimethylamino ethyl methacrylate (DMAEMA)-block-poly(ethylene glycol) (PEG)) copolymer has been carried out and the block copolymer was characterized by FT-IR, DSC, and $^1$H-NMR. The formation of polymeric nanoaggregation was observed in the solution mixture of poly(DMAEMA) -block-PEG copolymer and poly (ethyl acrylamide) (EAAm) due to the intermolecular interaction via hydrogen bond between DMAEMA and poly(EAAm). The formation of polymeric nanoaggregation was observed above critical micelle concentration (CMC).

• Journal of the Korean Chemical Society
• /
• v.17 no.5
• /
• pp.371-377
• /
• 1973

The low temperature anionic copolymerization of p-tolylisocyanate ($M_1$) with n-hexylisocyanate ($M_2$) in DMF was carried out with NaCN. Copolymers were characterized by osmometry and I. R. spectrophotometry. Also copolymer composition was analyzed by spectral measurements. The behavior of this copolymerization system was the type of less ideal, that is the $M_2$ prefers to react exclusively with the same kind of species. The stress-strain behavior of the copolymer obtained from equimolar comonomer feed exhibited somewhat brittle or rigid character.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.2
• /
• pp.175-182
• /
• 1995

Styrene-Maleic anhydride copolymer (SMA) was prepared by the radical copolmerization of styrene and maleic anhydride using ${\alpha}-{\alpha}'$ azobis(isobutyronitrile) as an initiatrr. SMA was further reacted with m-amino phenol to obtain aminophenol-substituted SMR (mSMA). Sulfonated SMA and mSMA were also prepared by the reaction of copolymers with sulfuric acid The copolyniers were characterized by infrared spectroscopy. It was found from the results of elemental analysis that the substitution degree of aminophenol in the mSMR is 44% and the degree is lowered to 35% after sulfonation. The percentage of copolymers adsorbed on the surface of cement particles was increased with a decrease of added copolymers. While, the arnourit of sulfonated SMA absorbed on the surface of cement particles was larger than that of the sulfonated mSMA The copolymers synthesized in this study are probably expected as a high range water reducer for coiicxte.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.242-248
• /
• 2003

PP-g-(AN/Sty) was synthesized by grafting with acrylonitrile (AN) and styrene (Sty) onto PP staple fiber using an electron beam accelerator and followed by amidoximination and phosphorylation. Mole fraction of AN in the graft chain increased with the increase of the AN content in the monomer mixture. The highest AN grafting yield of 45% was obtained at a monomer ratio of 40 vol% AN/60 vol% Sty. Mole fraction of AN in the graft chain decreased with the increase of methanol amount used its solvent. As reaction temperature increased, the grafting yield of copolymer increased and reached equilibrium at 50$^{\circ}C$. Amount of amidoxime group in fibrous ion exchanger was increased as increasing amount of hydroxylamine, and the maximum content of amidoxime group was observed at 5.8 mmol/g with the 9 wt% hydroxylamine concentration. Content of phosphorous group in fibrous ion exchanger increased up to 0.5 N phosphoric acid concentration, and then leveled off. The adsorption ability of the copolymer for uranyl ion by the chelating adsorbents was in the following order : bifunctional PP-g-(AN/sty) > amidoximated PP-g-(AN/Sty) > phosphorylated PP-g-(AN/Sty).

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.649-656
• /
• 2001

Miscibility of poly(4-vinylpyridine) (P4VP) blends with poly(vinyl acetate-co-vinyl alcohol) (VAc-VAL copolymers) was investigated as a function of comonomer composition of VAc-VAL copolymers. Differential scanning calorimetry (DSC) and thermo-optical microscopic (TOM) analysis confirmed that P4VP is miscible with VAc-VAL copolymers containing more than 30 mole% VAL. Fourier transform inflated (FT-IR) spectroscopic analysis revealed that the strong intermolecular hydrongen bonding interaction between the vinylpyridine and VAL hydroxyl group was formed. Theoretical phase diagram was constructed by the calculation using the Association model, a thermodynamic model for hydrogen-bonded polymer blend systems developed by Coleman et al. The calculated theoretical binodal phase diagrams were in good agreement with the experimentally determined cloud point curves.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.59-68
• /
• 2002

The cylindrical Upper Guide Structure assembly of the reactor intervals wish the Core Support Barrel and the Inner Barrel Assembly is subjected to flow induced loads horizontally which include random pressure fluctuation due to turbulent flow and pump pulsation pressures. The purpose of this papers is to perform random vibration and harmonic response analyses fort flow induced loads. The dynamic response characteristics due to random turbulence and pump pulsation loads were evaluated using the lumped mass beam model. Especially the model considered the annulus effects due to water gaps existing between cylindrical structures such as the Upper Guide Structure Barrel, the Core Support Barrel, and the Inner Barrel Assembly. The effect of the Inner Barrel Assembly inside the Upper Guide Structure assembly was studied. The peak dynamic responses lot each loading condition due to the addition of IBA were affected by the natural frequencies of the structures. Therefore the peak dynamic responses of the structures should be conservatively obtained from evaluation of dynamic analysis for various loading conditions.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.269-275
• /
• 2013

In this study, we prepared poly(ethylene-ter-1-hexene-ter-divinylbenzene) using various metallocene catalysts with trityl tetrakis(pentafluorophenyl)borate/triisobutylaluminium cocatalysts system. We tried rac-$Et(Ind)_2ZrCl_2$, rac-$SiMe_2(Ind)_2ZrCl_2$, and rac-$SiMe_2(2-Me-Ind)_2ZrCl_2$ to choose optimum metallocene catalyst, comparing with catalytic activity, molecular weight, molecular weight distribution of the terpolymers. To study the effects of chain length of high ${\alpha}$-olefins on the terpolymerization, we synthesized the terpolymers using 1-hexene, 1-octene, 1-decene or 1-dodecene. We characterized chemical composition, thermal properties, and mechanical properties of the terpolymers.