Random Vibration and Harmonic Response Analyses of Upper Guide Structure Assembly to Flow Induced Loads

유체유발하중을 받는 상부안내구조물의 랜덤진동 및 조화응답해석

  • 지용관 (정회원·한국전력기술(주)) ;
  • 이영신 (정회원·충남대학교 기계설계공학과)
  • Published : 2002.03.01

Abstract

The cylindrical Upper Guide Structure assembly of the reactor intervals wish the Core Support Barrel and the Inner Barrel Assembly is subjected to flow induced loads horizontally which include random pressure fluctuation due to turbulent flow and pump pulsation pressures. The purpose of this papers is to perform random vibration and harmonic response analyses fort flow induced loads. The dynamic response characteristics due to random turbulence and pump pulsation loads were evaluated using the lumped mass beam model. Especially the model considered the annulus effects due to water gaps existing between cylindrical structures such as the Upper Guide Structure Barrel, the Core Support Barrel, and the Inner Barrel Assembly. The effect of the Inner Barrel Assembly inside the Upper Guide Structure assembly was studied. The peak dynamic responses lot each loading condition due to the addition of IBA were affected by the natural frequencies of the structures. Therefore the peak dynamic responses of the structures should be conservatively obtained from evaluation of dynamic analysis for various loading conditions.

원자로 내부구조물의 상부안내구조물집합체는 노심지지배럴과 내부배럴집합체와 함께 원통형의 실린더 구조이며, 유체의 난류하중과 펌프의 맥동하중으로 인한 유체유발하중을 수평방향으로 받는다. 본 논문에서는 이 유체유발하중에 대한 랜덤진동해석과 조화응답해석을 수행한 내용을 기술하였다. 이 해석을 위해 집중질량 보 요소 모델을 사용하였고, 랜덤하중과 펌프맥동하중으로 발생되는 동적응답특성을 평가하였다. 특히 원통형태의 상부안내구조물, 노심지지배럴, 내부배럴집합체 사이에서 형성되는 환형공간의 동수력 연성 효과를 고려하여 모델링 하였고, 상부안내구조물 안쪽에 설치되는 내부배럴집합체의 추가 영향을 검토하였다. 내부배럴집합체의 추가로 인한 하중조건별 최대동적응답은 구조물의 고유진동수에 영향을 받으며, 따라서 구조물의 최대동적응답은 여러 하중 조건별 동적해석 평가를 통해 보수적으로 구하여져야 한다.

Keywords

References

  1. Rhee, H. N. and Shin, T. M., 'Finite Element Modelling of a Submerged Cylindrical Structure considering Fluid-Structure Interaction Effect and Dynamic Response Spectrum Analysis', Computational Structural Engineering, Vol. 14, No. 1, 2001, pp.1-9
  2. Jhung M. J., et al., 'Modal Analysis of Cylindrical Shell using a Scale Model of the Core Support Barrel', Computational Structural Engineering, Vol. 12, No. 1, 1999, pp.15-27
  3. Chen S. S., and Rosenberg G. S., 'Dynamics of a Coupled Shell-Fluid System', Nuclear En- gineering and Design, Vol. 32, 1975, pp.302-310 https://doi.org/10.1016/0029-5493(75)90101-6
  4. Fritz R. J., 'The Effect of Liquids on the Dynamic Motions of Immersed Solids', Journal of Engineering for Industry, Vol. 94, 1972, pp.167-172
  5. Jhung M. J., et al., 'The Effect of Fluid-Structure Interaction on the Dynamic Response of Reactor Internals', Computational Structural Engineering, Vol. 6, No. 4, 1993, pp.73-82
  6. Stokey W. F. and Scavuzzo R. J., 'Normal Mode Solution of Fluid-Coupled Concentric Cylindrical Vessels', Journal of Pressure Vessel Technology, Vol. 100, 1978, pp.350-353
  7. ANSYS, Inc., ANSYS Structural Analysis Guide, ANSYS, Inc., Houston, 1998
  8. Harris C. M. and Crede C. E., Shock and Vibration Handbook, McGraw-Hill Book Company, New York, 1976, pp.11-12