• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.417-423
• /
• 2019

A new wastewater treatment system was developed to remove nitrate nitrogen and phosphorus in synthetic wastewater through electrochemical treatment. Higher removal efficiencies of nitrate nitrogen were obtained as the current density increased. Higher nitrate removal efficiencies were obtained when the switching interval was 1 min. The total phosphorus removal rate according to the current density was found to be over 90% without being greatly affected by the change in current density and interval, and the total removal rate increased with increasing switching time (1 min interval). On the other hand, COD was not treated by electrochemical treatment, but rather increased as the electrode eluted. Also, the consumption rate of the electrode was smaller as the switching interval was shorter. Finally, removal efficiencies of 98.1% of nitrate and 90% of phosphorus were obtained through electrochemical treatment (current density $50mA/cm^2$, switching interval 1 min, flow rate 540 mL/min).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.1
• /
• pp.19-31
• /
• 1982

The purpose of the research is to investigate the applicability of the filter activated sludge process for the treatment of toxic phenolic wastewaters. The experiment for the research was carried out by continuously feeding synthetic phenol wastewater for four periods, and the results show that a synthetic fiber filter is an adequate material for filter activated sludge process when taking consideration of durability, SS removal efficiency and wastewater permeability. The permeability of the filter sharply decreases when the temperature of the reactor is below $10{\sim}15^{\circ}C$ for a long period. In filter activated sludge process, even under high volumetric loading conditions, high phenol removal efficiencies can be attained due to the high microbial sludge concentration in the reactor and consequently low F/M ratio. In this research, the effluent phenol concentration were checked to be below $0.1mg/{\ell}$ at the influent phenol concentrations of $63{\sim}468mg/{\ell}$. During the research very low microbial yield coefficients, 0.035~0.160 kg SS/kg COD removed, were observed and the temperature coefficient for aerobic sludge digestion was measured to be 1.021.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.3
• /
• pp.21-29
• /
• 2006

The treatment performance of ozonation and three types of advanced oxidation processes (AOPs) such as $O_3/H_2O_2$, $O_3/UV$, $O_3/H_2O_2/UV$ was experimentally investigated for the treatment of refractory synthetic dye wastewater. The removal efficiency of $COD_{cr}$, color and biodegradability ($BOD_5/COD_{cr}$) were relatively evaluated in each treatment unit with simulated dye wastewater. Optimal operational conditions of pH, temperature, dosage and circulation flow rate were also investigated. All suggested processes revealed an effectiveness for the removal of color within a short operational time, moreover, $O_3/H_2O_2/UV$ process showed the highest $COD_{cr}$ removal and biodegradability enhancement among proposed oxidation process.

• Membrane Journal
• /
• v.31 no.6
• /
• pp.384-392
• /
• 2021

Growing pollution due to industrialization leads to difficulties in survival of mankind. Generation of clean water from wastewater by membrane separation process is emerging cost efficient technology. Membrane prepared from renewable resources are in lots of demand to reduce burden on synthetic polymers which is one of the source of environmental pollution. Bacterial cellulose (BC) is very pure and distinct form of cellulose nanofibrils (CNF). Nanopapers prepared from CNF are used ad ultrafiltration (UF) and nanofiltration (NF) membrane for different applications. High crystallinity of BC gives rise to excellent mechanical property, an essential criterion for wastewater treatment membrane. In this review, BC based membrane for application in dye, oil, heavy metal and chemical removal from wastewater is discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.493-498
• /
• 2013

The production of synthetic polymer compounds and ethanolamine (ETA, a pH control agent used in nuclear power plants) generates effluent that pollutes water. This study focused on the development of chemicals for the treatment of effluent and processes to reduce the COD level due to the presence of organic materials via physicochemical treatment. It was found that a mixed coagulant of $FeCl_2$ and $MgCl_2$ (1:1) was the most effective in treating effluent and reducing the COD level. When the mixed coagulant was injected into effluent including organic materials, the COD level was reduced by more than 80%.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.141-141
• /
• 2003

Dichlorobenzen과 같은 휘발성 유기물질(Volatile Organic Compound)은 산업폐수 및 폐가스, 폐기물등이 다양한 형태로 대기 중에 존재하면서 심각한 환경문제를 유발시키고 있다 따라서, 본 연구에서는 TiO$_2$에 SiO$_2$를 첨가하여 열처리시 anatase상에서 rutile상으로 전이되는 것을 제어하며 비표면적을 크게 하여 휘발성유기 물질에 대한 광촉매 활성을 증진시키고자 두가지 합성방법, 즉 졸겔 공정과 수열합성 공정을 사용하여, 공정조건을 변화시키면서, 광촉매활성이 가장 우수한 실험조건을 결정하였다.

• Microbiology and Biotechnology Letters
• /
• v.4 no.3
• /
• pp.117-121
• /
• 1976

A microbial strain capable of degrading ABS (alkyl benzene sulfonate) was isolated and identified as Pseudomonas caryophylli. During the incubation of the isolated bacterium in a synthetic effluent containing 10 ppm of ABS, the extents of removal of ABS, BOD and COD were 40％, 89％ and 71％, respectively. The degradability of ABS by pure culture with the isolated strain was twice higher than that of mixed culture with natural microflora. The biodegradability of some commercial detergents in Korea by the isolated organism was as follows: Hiti 46.2％, Kleenup 37.5％, No.1 29％, and OK 27.9％.

• The Microorganisms and Industry
• /
• v.16 no.3
• /
• pp.56-62
• /
• 1990

일반적으로 산업폐수및 생활하수의 생물학적 처리에 관계하는 미생물의 종류는 약1,000-2,000종에 이르는 것으로 추정된다. 이와 같은 미생물의 범위는 매우 넓어서 세균, 균류는 물론이고, 조류, 원생동물, 후생동물까지 포함한다. 19세기 이전에 미생물을 이용한 폐하수 처리는 생활하수와 같이 쉽게 분해하는 물질로만 구성되어 있기 때문에 간단한 처리 공정으로도 충분히 운영되었으나, 산업혁명 이후 새로운 화학물질이 합성되어 폐하수로 배출되므로 처리효율을 달성하는데 더욱 어렵게 되므로 미생물을 전공한 전문인력의 역할이 가일층 높아지게 되었다. 특히 1970년대 이후에는 생물공학 기법을 이용하여 독성 유해물질을 무해화(Detoxification) 하고, 광물화(Mineralization)할 수 있는 미생물 균류를 연구 개발하여 폐수나 폐기물을 처리하는데 활용코자하는 노력이 활발히 진행되고 있으며 일부는 큰 결실을 맺은 것도 있지만 아직도 연구가 진행 중인 분야가 더 많은 편이다. 그러므로 본 고에서는 지금까지 연구 보고된 결과와 앞으로 미생물을 전공한 우리들이 나아갈 방향을 제시코자 한다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.225-226
• /
• 2003

일시적 수용성 반응성 분산염료는 염료합성시에 분산제를 사용하지 않기 때문에 원가절감 및 밀링공정 생략에 의한 생산성 증대효과가 있다[1-2l. 또한 혼방섬유를 단일염료로 일욕에서 염색할 수 있기 때문에 공정단축의 효과, 염색공정시에도 분산제를 사용하지 않아도 되므로 조제절감 및 염색폐수의 환경문제 개선 둥의 장점이 있다. 3원색(yellow, red, blue)의 일시적 수용성 반응성 분산염료를 이용하여, Acetate/Nylon(A/N), Acetate/polyester(A/P), Polyester/Nylon(P/N) 혼방섬유를 일욕에서 염색하였으며, 염색성, 견뢰도 및 염색폐수의 환경성을 평가하였다. (중략)

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.172.2-172.2
• /
• 2011

다양한 저급연료나 폐기물로부터 가스엔진이나 연료전지의 연료로 사용하기위한 연료가스를 얻기 위한 방법으로 가스화 기술을 적용할 수 있다. 폐기물의 가스화를 통해 발생된 합성가스에는 CO, $H_2$, $CO_2$와 같은 주요성분 이외에 황화합물($H_2S$, COS), 염소화합물(HCl), 고형 물질(분진)등의 오염물질이 포함되어 있으므로, 이용목적에 따라 적절한 정제 기술이 필요하게 된다. 현재 가장 널리 알려진 저온 습식 정제공정은 장치운전이 쉽고 오염물질 제거효율이 높은 장점이 있으나, 합성가스 온도를 상온까지 낮추기 때문에 현열 손실이 발생하는 단점을 가지고 있다. 고온 건식 정제공정에 의해 $300^{\circ}C$ 이상의 고온에서 오염물질의 제거가 가능하다면 에너지 이용효율을 높일 수 있고, 습식공정에 의해 발생되는 폐수처리에 따른 비용 절감효과도 얻을 수 있다. 폐기물 합성가스를 최종 적용처에 이용하기위한 고온 정제 공정의 적용을 위해 흡착제를 이용하여 탈황, 탈염 실험을 실시하였고, 실험결과로부터 장치 설계의 기초인자를 도출하였다.