• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.792-795
• /
• 2007

본 연구 목적은 석탄 가스화를 통해 얻어진 합성가스를 이용하여 국내에서 개발된 DME 합성 촉매를 사용하여 DME 전환 공정에 대한 특성을 파악하는 것이다. 특히, DME 합성 반응에 가장 큰 영향을 미치는 합성 반응로의 온도 제어를 위하여 thermosyphon 시스템을 개발하여 DME 합성 반응에 최적온도로 알려진 $230{\sim}260^{\cdot}C$ 범위에서 제어가 가능함을 확인 하였다. 석탄 40 kg/h를 공급하였을 때 합성가스 유량은 $80{\sim}100$ $Nm^3/h$ 정도를 얻었다. DME 합성 반응에 사용한 촉매는 합성가스로부터 메탄올을 얻기 위한 촉매와 메탄올의 탈수 촉매(Cu/Zn/Al+r-$Al_2O_3$)를 혼합한 촉매를 사용하였다. DME 합성 반응로의 GHSV(1/kg$^{\cdot}C$cat h)는 $2500{\sim}3000$ 정도이며, 운전 압력 60기압에서 $H_2$ 전환율 $65{\sim}75%$, DME 선택도는 $69{\sim}79%$ 정도를 얻었다.

• Clean Technology
• /
• v.22 no.3
• /
• pp.196-202
• /
• 2016

In this study, ceria- based catalysts were prepared for dimethyl carbonate (DMC) synthesis and reaction conditions were evaluated for finding the optimal reaction route. In order to find optimal catalysts for DMC synthesis, calcination temperature and Cu(II) impregnation amount were evaluated. The oxidative carbonylation using methanol, carbon monoxide and oxygen and the direct synthesis using methanol and carbon dioxide were introduced for producing DMC. Following the law of Le Chatelier, the dehydration reaction was applied for enhancing the reactivity (methanol conversion) as removing water during the reaction. 2-cyanopyridine, as a chemical dehydration agent, was used. In the case of the oxidative carbonylation, methanol conversion rate increased from 15.1% to 38.7% and the DMC selectivity increased from 0% to 98.8%. In the case of the direct synthesis, methanol conversion rate increased from 1.0% to 77.8% and the DMC selectivity increased from 41.2% to 100.0%.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.255-258
• /
• 1998

Sine파를 이용한 오디오 분석과 합성은 고음질 저비트율 오디오 부호화에 매우 효율적인 방법의 하나로 알려져 있다. 본 논문은 sine파를 이용한 오디오 분석과 합성에 중요한 sine파 검출에 심리음향모델을 활용하는 방안을 제안하였다. 모의실험 결과, 심리음향모델을 사용한 경우 사용하지 않은 경우에 비해 합성에 사용되는 sine파의 개수를 약 50% 정도 줄일 수 있었음을 알 수 있었다. 한편 오디로 신호의 attack이나 nonstationarity를 처리할 수 있는 방법이 sine파를 이용한 오디오 부호화에 필수적이라는 사실을 확인하였고 그에 대한 대처 방안을 제시하였다.

• Electrical & Electronic Materials
• /
• v.1 no.2
• /
• pp.149-151
• /
• 1988

전도성 유기물질은 저차원성에 유래한 전자적 거동, 전도기구 및 공학적 응용의 관점으로부터 흥미를 갖게 되어 이 분야의 연구가 현저하게 발전하고 있다. 따라서 본 연구에서는 Langmuir-Blodgett법을 위한 전도성 유기물질 합성의 일환으로 성막물질 합성의 중간체로 이용되는 LiTCNQ를 diethyl succinate를 출발물질로 사용하여 합성한 결과 총수율이 47.5%였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.1-1
• /
• 2008

본 연구에서는 비대칭 마그네트론 스퍼터링법을 이용하여 Cr-Zr-N 박막을 합성하였다. Cr-Zr-N 박막의 합성을 위해 사용된 타겟은 Cr 과 Zr의 segments(Cr:Zr= 50:50 vol.%)로 구성된 단일 타겟을 사용하였고, 공정조건 중 질소분압을 변화시켜 Cr-Zr-N 박막을 합성하였다. 또한 질소분압 변화에 따른 박막의 물리적, 기계적, 화학적 특성들의 변화를 분석하였으며, 기 발표된 Cr 타겟과 Zr 타겟을 이용하여 합성된 Cr-Zr-N 박막의 특성들과 비교하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.127-127
• /
• 2012

비대칭 마그네트론 스퍼터링을 이용하여 다양한 공정조건에서 조성을 변화시키며 Zn-Mg 합금 박막을 합성하였으며, 합성된 박막의 기초특성 분석을 실시하였다. 기존의 마그네트론 스퍼터링 공정으로 낮은 Mg 조성의 Zn-Mg 박막을 합성 할 경우 porous한 박막이 합성 되었다. 본 연구에서는 모든 조성의 Zn-Mg 박막의 치밀화를 위하여 차별화된 박막 합성 기술을 연구하였다. 본 연구에서 개발된 박막 합성 기술을 적용하여 Zn-Mg 박막을 합성 한 결과 3wt.% Mg 타겟을 이용하여도 치밀한 조직의 박막을 합성할 수 있었다. Zn-Mg 박막의 경도는 박막의 Mg 조성이 높을수록 증가하여 최고 403.1Hv를 나타냈다.

• Clean Technology
• /
• v.12 no.3
• /
• pp.138-144
• /
• 2006

Conversion of methane to synthesis gas in a capacitive rf plasma at low pressure was experimentally studied. In this plasma, electrons which had sufficient energy-level collided with the molecules of methane or oxygen-containing gas, which were than activated and converted to synthesis gas. The effect of input power, various oxygen-containing gas and composition of the gas mixture were investigated. The conversion of methane reached up to 100%. In all cases, hydrogen and carbon oxide were produced as primary products, and other compounds was generated. The conversion of methane and the yield of hydrogen and carbon oxides were increased with increasing the input power. Depending on the oxygen-containing gases, the composition of synthesis gas was varied.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.54-59
• /
• 2011

An investigation on the synthesis of aluminum tartrate, one of the aluminum organic compounds, has been performed using aluminum chloride solution as a raw material. For this aim, the effect of the ratio of ethanol/Al solution and pH on the synthesis of aluminum tartrate has been examined and aluminum tartrate synthesized has also been characterized in terms of the chemical composition, X-ray diffraction pattern, particle size distribution, and SEM analysis. As a result, the synthesis more than 97% could be obtained under the conditions of pH more than 3.0 at the ratio of ethanol/Al solution of 3.0. From the chemical analysis of aluminum tartrate synthesized in this work, the content of $NH_4$, Al and C was found to be 9.10, 4.83 and 25.8%, respectively. In addition, aluminum tartrate synthesized from the aluminum chloride solution was found to be $(NH_4)_3Al(C_4H_4O_6)_3$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.150-158
• /
• 2003

In the beam pattern synthesis problem using line source, the relationship between source distribution function and beam pattern may be represented by Fourier transform pair. In this paper, a general method to synthesize the line source distribution for a desired lobe-like beam pattern is presented by developing the nonlinear inversion method based on an iterative sampling technique. This method can be applied to the synthesis of continuously distributed dielectric constants satisfying the desired inverse scattering coefficient patterns when illuminating by TE-polarized and TM-polarized plane waves to arbitrary dielectric material. Furthermore this method can also be applied to the synthesis of transmission line with arbitrary reflection coefficient patterns. Some bandstop spatial filter and dispersive transmission line filter are illustrated for generality.

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.763-769
• /
• 2000

The multifunctional cation exchangers, sulfonated polypropylene-g-(acrylic acid/styrene) [PP-g-(AAc/Sty)] were synthesized by the irradiational grafting of AAc and Sty onto PP staple fabric with electron beam accelerator and its subsequent sulfonation. The highest degree of grafting obtained was 190% at a monomer mixture of 30 vol% AAc: 70 vol% Sty and a solvent mixture of 30 vol% water : 70 vol% methanol and the degree of grafting decreased with an increase of the AAc content in the monomer mixture at constant solvent content. Maximum ion exchange capacity of the copolymer was 4.6 meq/g. The Li$^{+}$ adsorption ability of the copolymer synthesized in the study was the best among PP-g- AAc, sulfonated PP-g-Sty, and sulfonated PP-g-(AAc/Sty).).