• Title/Summary/Keyword: 합성율

Search Result 1,827, Processing Time 0.032 seconds

An Experimental Evaluation on Flexural Performance of Light-Weight Void Composite Floor using GFRP (GFRP를 이용한 경량합성바닥의 휨성능에 대한 실험적 평가)

  • Ryu, Jae-Ho;Park, Se-Ho;Ju, Young-Kyu;Kim, Sang-Dae
    • Journal of Korean Society of Steel Construction
    • /
    • v.23 no.1
    • /
    • pp.125-135
    • /
    • 2011
  • To obtain a lower story height with a long span and better fire resistance, a new composite floor system using GFRP (glass-fiber-reinforced plastics) was proposed. This floor system consists of asymmetric steel with a web opening, a hollow core ball, concrete, and GFRP. To evaluate the flexural performance of the new composite floor system, an experiment was conducted. The test parameters were the presence of GFRP, the void ratio in relation to the hollow core balls, and the web opening. The test results showed that the resistance and stiffness of the specimen with GFRP were 10% higher than those of the reference specimen, and that fully composite action was accomplished up to the yielding point. After the attainment of the yield strength, the ductility of the specimen was reduced due to the stress concentration around the web openings. The slip between the concrete and steel beam, however, was small. Thus, in the design of the proposed new floor systems, it is desirable that the calculated resistance be reduced by 15%, for safety.

Bench Scale Performance Test of WGS and $CO_2$ PSA for $H_2$ Recovery from Syn Gas (합성가스로부터 수소회수를 위한 WGS 및 $CO_2$ PSA 성능평가)

  • Jeong, Seong-Jae;Cha, Jae-Jun;Kim, Young-Suk
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2010.06a
    • /
    • pp.206.1-206.1
    • /
    • 2010
  • 폐기물 등을 열분해 가스화한 합성가스로부터 효과적으로 고순도의 수소를 회수하기 위하여 WGS(수성가스전환반응) 및 $CO_2$ 회수 PSA 공정을 적용하였다. 벤치스케일 열교환형 WGS반응기를 개발하여 기존 단열방식에 비하여 단순화한 반응시스템을 구축하였으며 출구 CO농도 4%대를 달성하였다. 또한 3베드로 구성된 벤치스케일의 $CO_2$ PSA운전을 수행한 결과, 2.5barg 흡착 및 진공재생단계를 적용하여 회수되는 $CO_2$의 농도가 95%이상, 회수율 80%이상을 기록하는 효율적인 $CO_2$ 회수공정을 개발하였다. 한편, 흡탈착 모사프로그램인 ADSIM을 통해서도 실험과 비교적 일치한 결과를 얻을 수 있었는데 향후 스케일업 설계자료 확보시 유용할 것으로 판단되었다.

  • PDF

Microbial Degradation of Anionic Synthetic Detergents (음이온계 합성세제의 미생물분해)

  • 김영배;이수래
    • Microbiology and Biotechnology Letters
    • /
    • v.4 no.3
    • /
    • pp.117-121
    • /
    • 1976
  • A microbial strain capable of degrading ABS (alkyl benzene sulfonate) was isolated and identified as Pseudomonas caryophylli. During the incubation of the isolated bacterium in a synthetic effluent containing 10 ppm of ABS, the extents of removal of ABS, BOD and COD were 40%, 89% and 71%, respectively. The degradability of ABS by pure culture with the isolated strain was twice higher than that of mixed culture with natural microflora. The biodegradability of some commercial detergents in Korea by the isolated organism was as follows: Hiti 46.2%, Kleenup 37.5%, No.1 29%, and OK 27.9%.

  • PDF

Enhancement of Anaerobic Degradation by Organic Stimulants Addition (반응촉진 유기물 첨가에 의한 혐기성 분해율의 향상에 관한 연구)

  • 손부순;허준무;배형석;서성철;박종안
    • Journal of environmental and Sanitary engineering
    • /
    • v.13 no.1
    • /
    • pp.32-43
    • /
    • 1998
  • 혐기성대상과정중 메탄생성균(methanogenic bacteria)에 의한 메탄생성시 주요 기질인 아세트산 (acetic acid)을 분해할 경우에 여러 가지 복합기질 중 아미노산 첨가에 의한 분해속도증가에 미치는 영향과 투입한 아미노산이 미생물에 의하여 생체량으로 합성되는 정도를 고찰하였다. 실험결과 메탄생성균은 glycine, serine, threonine, aspartic acid, trytophan 등의 혐기성미생물의 생체량합성에 필요한 물질을 투입할 경우에 아세트산의 분해속도가 증가하였으며, 여러 가지 아미노산을 혼합하여 주입한 결과 분해속도가 17% 향상되었다. 한편, 메탄생성균의 lysing에 의하여 생성된 유기물은 메탄이나 이산화탄소의 최종산물로 전환되기보다는 새로운 메탄생성균의 생체량을 형성하는데 직접 이용되었으며, 아세트산의 분해속도를 52% 증가시켰다. 단순기질(sole substrate)과 복합기질(complex substrate)의 분해는 미생물의 생체량합성에 필요한 여러 가지 중간대사산물간의 상호자극효과에 의하여 복합기질이 용이한 것으로 나타났으며, 유입기질내 활성이 강한 슬러지의 농도는 혐기성처리에 매우 중요한 부분을 차지하였다.

  • PDF

Effect of Chemical Composition and Temperature on Characteristic of Zn-Mg thin films (Zn-Mg 박막의 특성에 대한 조성 및 합성 온도의 영향 평가)

  • Ra, Jeong-Hyeon;Kim, Gyu-Seong;Kim, Dong-Jun;Kim, Seong-Min;Lee, Sang-Yul
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2013.05a
    • /
    • pp.86-86
    • /
    • 2013
  • 우수한 내식성을 나타내는 Zn-Mg 합금을 강판의 표면처리에 적용하기 위하여 비대칭 마그네트론 스퍼터링을 이용하여 Zn-Mg 박막을 합성하였다. Zn-Mg 박막의 미세조직은 박막 내에 Mg 함량이 증가 할수록 치밀해지며, 합성 중의 온도가 높아지면 박막은 치밀도가 낮아진다. 이렇게 변화하는 Zn-Mg 박막의 미세조직은 박막의 밀착성 및 내식성에 큰 영향을 미치며 미세조직이 치밀할수록 Zn-Mg 박막의 내식성은 증가하나 밀착성은 감소하는 경향성을 나타냈다.

  • PDF

Characterization and Electrocatalytic Activities of Pt Nanoparticles Synthesized by Solution Plasma Process (유체 플라즈마 공정으로 합성한 백금 나노입자의 전기화학적 특성 평가)

  • Lee, Yu-Jin;Jin, Sang-Hun;Kim, Seong-Cheol;Kim, Seong-Min;Lee, Sang-Yul
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2013.05a
    • /
    • pp.161-161
    • /
    • 2013
  • 본 연구에서는 백금 나노입자의 크기, 형상, 분포도에 따른 전기 화학적 효율을 평가하기 위해 계면활성제 농도를 달리하여 백금 나노입자를 합성하였다. 계면활성제로는 CTAB(cetyltrimethylammonium bromide)이 사용되었으며, 0.5 mM의 $H_2PtCl_6$의 백금 염을 환원시키기 위하여 유체 플라즈마 공정을 이용하였다. 공정 시간은 UV-vis 스펙트럼 결과를 토대로, 262 nm의 파장대에서 관찰된 LMCT(ligand-to-metal charge transfer) peak이 사라지는 시간을 기준으로 하여 공정을 진행하였다. 합성된 나노입자는 순환 전류-전압곡선(CV), TEM이미지와 XRD 분석을 이용하여 전기화학적 특성, 입자의 평균 크기 및 형상 변화를 비교 분석 하였다. 그 결과 CTAB을 넣지 않은 백금나노입자의 경우, CTAB을 넣고 제조한 백금 나노입자와는 달리 구의 형태로 뭉쳐있음을 관찰하였고, 이러한 백금 나노입자의 구조는 보다 높은 전기화학적 활성 특성을 가짐을 보였다.

  • PDF

Box-Level Post Processing for Accurate Pig Detection (정확한 돼지 탐지를 위한 박스 레벨 후처리)

  • Yu, SeungHyun;Kim, Daewon;Kim, Heegon;Chung, Yongwha;Park, Daihee
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2020.11a
    • /
    • pp.705-708
    • /
    • 2020
  • 합성곱 신경망(Convolutional Neural Network) 기반 객체 탐지기의 발전으로 돈사에서 돼지 모니터링이 가능하지만, 실제 농가에서 적용하기 위해서는 탐지기의 정확도를 개선해야 하는 문제가 여전히 남아있다. 본 연구에서는 합성곱 신경망 기반 돼지 탐지기의 출력인 박스들의 신뢰도 값을 평가하고 잘못된 박스들의 신뢰도 값을 보정하는 박스 레벨 후처리 방법을 제안한다. 즉, 신뢰도 값이 가짜 돼지인지 진짜 돼지인지 애매한 경우, 박스내 전경 픽셀 정보와 인접 박스의 정보를 이용하여 신뢰도 값을 낮추거나 높이는 보정 작업을 수행한다. 그리고 실제 돈사에서 취득한 11,308장의 영상 데이터로 실험한 결과, 제안 방법은 합성곱 신경망 기반 돼지 탐지기의 에러율을 4.4%에서 1.2%로 개선하는 효과가 있음을 확인하였다.

Flowering Periods, Genetic Characteristics, and Cross-Pollination Rate of Zoysia spp. in Natural Open-Pollination (자연 방임수분 상태에서 한국잔디류의 개화기간, 유전특성 및 타가수분율)

  • Choi, Dong-Keun;Yang, Geun-Mo;Choi, Joon-Soo
    • Asian Journal of Turfgrass Science
    • /
    • v.22 no.1
    • /
    • pp.13-24
    • /
    • 2008
  • This study was carried out to provide basic information for the breeding of zoysiagrass synthetic varieties. For estimation of flowering periods, genetic characteristics, and cross-pollination rate, 5 combinations of zoysiagrass breeding lines were compared. Days to stigma emergence and anther exertion were observed in the field to calculate overlapping dates for cross-fertilization. Harvested seed from cross breeding combinations were planted to compare genetic characteristics using morphological traits of progenies. These data were used for determination of 7 phenotypic inheritance types with 8 morphological traits. Cross-pollination rates in 3 combinations of zoysiagrasses were estimated by using lower part color of grass shoots. Cross-pollination rates of zoysiagrass ranged from 11.3$\sim$48.9%, which indicated that zoysiagrass is an allogamous plant. When zoysiagrass breeding lines are properly combined, they may result in valuable synthetic cultivars.

Detection of a Magnetic Dipole by Means of Magnetic Gradient Tensor (자력 변화율 텐서를 이용한 자기 쌍극자 위치 결정)

  • Rim, Hyoung-Rea
    • Journal of the Korean earth science society
    • /
    • v.32 no.6
    • /
    • pp.595-601
    • /
    • 2011
  • In this paper, I propose the algorithm that the location of a magnetic dipole can be detected from the magnetic gradient tensor. I induce the location vector of a vertically magnetizated dipole from the magnetic gradient tensor. Deficit of magnetic moment of magnetic dipole makes the induced location information incomplete. However, if the observation of magnetic gradient tensor would be collected on more points, the algorithm is able to catch the location of the magnetic dipole by clustering the solution of the proposed algorithm. For example, I show that the synthetic case of borehole observation of magnetic gradient tensor can find the source location successively by picking common solution area.

Synthesis of High Functionalized Anion Exchange Fibers Using Hybrid Polyolefine by $\gamma-Ray$ Mutual Radiation (방사선 동시조사법을 이용한 고관능성 Hybrid Polyolefine 음이온교환섬유의 합성)

  • Cho In-Hee;Kwak Noh-Seok;Kang Phil-Hyun;Nho Young-Chang;Hwang Taek-Sung
    • Polymer(Korea)
    • /
    • v.30 no.3
    • /
    • pp.217-223
    • /
    • 2006
  • Ion exchange fibers, high functionalized onto hybrid polyolefine fiber's surface, were synthesized by $\gamma-ray$ mutual radiation. Degree of grafting (DG) of copolymer increased with increasing GMA monomer concentration and the maximum rate of DG was 355% at 50 GMA. The graft reaction occurred in polar solvent and DG was 190% maximum value in $1.0\times10^{-3}$ Mohr's salt and 0.1 M sulfuric acid, respectively. The amination for graft copolymers varied depending on amine reagents, and the reactivity for copolymers was highest for methylamine, and that of triethylamine lowest. It was shown that water uptake and ion exchange capacities increased with increase in the rate of amination while surface area decreased rapidly as proceeding for graft reaction and amination.