• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1125-1128
• /
• 2008

본 연구에서는 Bayesian MCMC 방법과 2차 근사식을 이용한 최우추정(Maximum Likelihood Estimation, MLE)방법 방법을 이용하여 낙동강 유역의 본류지점인 낙동, 왜관, 고령교, 진동지점에 대한 점 빈도분석을 수행하고 그 결과로써 불확실성을 포함한 빈도곡선을 작성하였다. 통계적 실험을 통한 두 가지 추정방법의 분석을 위하여 먼저 자료의 길이가 100인 8개의 합성 유량자료 셋을 생성하여 비교 연구를 수행하였으며, 이를 자료길이 36인 실측 유량자료의 추정결과와 비교하였다. Bayesian MCMC 방법에 의한 평균값과 2차 근사식을 이용한 취우추정방법에 의한 모드에서의 2모수 Weibull 분포의 모수 추정값은 비슷한 결과를 보였으나, 불확실성을 나타내는 하한값과 상한값의 차이는 Bayesian MCMC 방법이 2차 근사식을 이용한 취우추정방법보다 불확실성을 감소시켜 나타내는 것을 알 수 있었다. 또한 실측 유량자료를 이용한 결과, 2차 근사식을 이용한 최우추정방법의 경우 자료의 길이가 감소됨에 따라 불확실성의 범위가 합성 유량자료를 사용한 경우에 비해 상대적으로 증가되지만, Bayesian MCMC 방법의 경우에는 자료의 길이에 대한 영향이 거의 없다는 결론을 얻을 수 있었다. 그러므로 저수량 빈도분석을 수행하기 위해 충분한 자료를 확보할 수 없는 국내의 상황을 감안할 때, 위와 같은 결론으로부터 Bayesian MCMC 방법이 불확실성을 표현하는데 있어서 2차 근사식을 이용한 최우추정방법에 비해 합리적일 수 있다는 결론을 얻을 수 있었다.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.81-86
• /
• 2009

The luminescence and fluorescence were investigated by photoluminescence spectroscopy for six gemstones which exhibit color change effect. The shape of luminescence peaks appears different when observed by a photoluminescence spectroscopewith a 514 nm Ar laser source. However, it was not possible to observe the difference in the spectra between the natural and synthetic origins for the same type of gemstones. It was found that the photoluminescence spectrum was related to the crystal structure of the stones. Photoluminescence spectra using a 325 nm He-Cd source reveal that fluorescence is relatively strong for synthetic alexandrite, synthetic color change sapphire and natural alexandrite comparing to the rest of gemstones examined.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.536-542
• /
• 1988

A nickel(Ⅱ) complex, Ni(IAA-NBz) (IAA-NBz') with ligand, N-benzylisonitrosoacetyl acetone imine (H-IAA-NBz) has been synthesized. This complex is very stable at room temperature and has cis-form and trans-form isomers. The ratio of nickel (Ⅱ) ion and ligand combined is 1 : 2. The elemental analysis, ir, nmr. electronic spectra and mass spectra have been studied. It is suggested from these studies that the isonitroso group of one ligand, H-IAA-NBz coordinates to nickel(Ⅱ)ion through the nitrogen atom to form five-membered ring, while that of the other ligand, H-IAA-NBz coordinates to nickel (Ⅱ) ion through the oxygen atom to form six-membered ring in square-planar complex.

• Journal of the Korean Geosynthetics Society
• /
• v.3 no.4
• /
• pp.21-27
• /
• 2004

Stress relaxation behaviors of nonwoven geotextile and geomembrane which have protection, filtration and drainage, water barrier functions, respectively were analyzed. 'Theory of transition phenomena' was applied to interpretate the stress relaxation behaviors of two geosynthetics. The initial and later relaxation times for stress relaxation behaviors of geosynthetics were derived from the constitutive equations. The initial relaxation behaviors of these geosynthetics were dependent on the additional strains and were especially faster with temperature. Finally, both relaxation times of geosynthetics were shorter with additional strain and temperature.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.60-68
• /
• 2012

This study describes an analytical and experimental investigation of the pedestrian steel-deck truss bridge in the City of Rochester, New York, U.S.A. This investigation was undertaken to provide assurance that this important bridge continues to be functional for this use. An ambient vibration experiment on full-scale structures is a way of assessing the reliability of the various assumptions employed in the mathematical models used in analysis. It is also the most reliable way of determining the structural parameters of major importance in structural dynamics, such as the mode shapes and the associated natural frequencies. Pedestrian-induced vibrations have been measured on the bridge to determine the displacement and the vertical and transverse dynamic characteristics of the steel deck truss. In the analytical modeling, three-dimensional finite element analysis was developed and validated against the ambient tests.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.222-229
• /
• 2016

Active synthetic aperture sonar on the small UUV is generated several trajectory disturbances under the influences of underwater environments, and causing a large error in the synthetic aperture processing. In this paper, we analyzed the effects of azimuth resolution for the phase mismatch of the synthetic aperture focus processing when the periodic or random trajectory disturbances was generated on the side direction. The simulation results show that ghost targets are generated and azimuth resolution is very deteriorated when disturbance amplitude is greater than $0.3{\lambda}$ and disturbance period is greater than $2L_{sa}$ in the periodic trajectory disturbances environments. And detection performance on the seabed small objects by the synthetic aperture processing is shown that there is a significant effects on the azimuth resolution depending on the types and conditions of the platform trajectory disturbance variations.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.291-298
• /
• 2013

Conjugated linoleic acid methylester was synthesized through isomerization of linoleic acid methylester by using heterogeneous catalysts. As for heterogeneous catalysts, Ni supported zeolite type catalysts were used. H zoelite Y (HY) were ion exchanged with KCl aqueous solution to synthesize K zeolite Y (KY), and with impregnation method, Ni supported zeolite catalysts were synthesized. Catalysts were used after pre-treatment by using hydrogen. HY catalysts showed a high conversion at low temperatures; but a low selectivity for conjugation reaction. KY catalysts showed a low conversion at low temperatures; but a similar conversion with HY catalysts at high temperatures while a high selectivity at low temperatures. As a result, 4 wt% Ni/KY720 recorded the high conjugation yield of 63.4% at 220.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.29-36
• /
• 2010

The spectroscopic characteristics of synthetic and natural emeralds were investigated by UV-Vis and FTIR spectroscopy before and after heat treatment. The Mo and Co for synthetic flux and C1 for synthetic hydrothermal emeralds have been detected by X-ray fluorescence analysis. In the region of UV-Visible, the absorption of emerald from Colombia was generally increased after the heat treatment. The peak which related to C1 component in the $3000-2600cm^{-1}$ was shown in the hydrothermal synthetic emeralds by FTIR spectroscopy. The $2358cm^{-1}$ peak which originates from $CO_2$ was decreased after the heat treatment in the natural emerald. This was corresponded with the changes of gas element after heat treatment.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.5 s.48
• /
• pp.475-485
• /
• 2000

In this study, an automated optimum design program for steel box girder bridges has been developed for the optimum design of composite steel box girder bridges. The design constraints required for the optimum design of steel box girder bridges are based on the Korean standard bridge specification. Considering characteristics of steel box girder bridges, several approximation techniques, such as artificial constraint deletion, variable linking and stress reanalysis technique etc. are also introduced to enhance the efficiency of optimization. The developed program is mainly composed of major sub-system modules including structural analysis module using commercial structural analysis program such as RM-SPACEFRAME, optimum design module, pre-process module for friendly user input, and post-processor module for office automation. In addition, in order to demonstrate the efficiency and applicability of the developed optimum design program for steel box girder bridges, a few numerical examples are applied. Based on the results of the application, it may be stated that the automatic optimum design program developed in this study can be a prototype model for the developement of optimum design program for other type of bridge.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.277-286
• /
• 2010

Derrick or caterpillar crane is generally used for the long-span/cable-stayed bridge construction by pre-cast segment lifting from over-land or water transportation. The heavy weight of them, however, could make defects on unstable under-construction structure and, furthermore a method of conventional segment transportation is also able to occur additional time and cost. In this study, in order to improve conventional construction method, the newly developed derrick crane is mainly considered. It could be not only eccentrically loadable on constructing girder but having rotatable boom for segment transportation from back-side. A series of construction stage using developed derrick crane is defined and also its numerical analysis is conducted. To reflect load characteristics of developed derrick crane on construction stage analysis, on/out of service load is separately calculated by considering vertical/lateral rotation range of boom and it is loaded on 4 fixed positions of crane. The derrick crane on this study could be time and cost saving solution for cable-stayed bridge construction and also make contributions to construction load reduction in its process.