• Restorative Dentistry and Endodontics
• /
• v.34 no.2
• /
• pp.120-129
• /
• 2009

The purpose of this study was to investigate the pulpal response to direct pulp capping with dentin sialoprotein (DSP) -derived synthetic peptide in teeth of dogs, and to compare its efficacy to capping substances $Ca(OH)_2$ and white mineral trioxide aggregate (WMTA). A total of 72 teeth of 6 healthy male beagle dogs were used. The mechanically exposed pulps were capped with one of the following: (1) DSP-derived synthetic peptide (PEP group): (2) $Ca(OH)_2$ (CH group): (3) a mixture paste of peptide and $Ca(OH)_2$ (PEP+CH group): or (4) white MTA (WMTA group). The access cavity was restored with a reinforced glass ionomer cement. Two dogs were sacrificed at each pre-determined intervals (2 weeks, 1 month, and 3 months). After the specimens were prepared for standard histological processing, sections were stained with hematoxylin and eosin. Under a light microscope, inflammatory response and hard tissue formation were evaluated in a blind manner by 2 observers. In the PEP group, only 3 of 17 specimens showed hard tissue formation, indication that the DSP-derived synthetic peptide did not induce proper healing of the pulp. Compared with the CH group, the PEP group demonstrated an increased inflammatory response and poor hard tissue formation. The CH and WMTA groups showed similar results for direct pulp capping in mechanically exposed teeth of dogs.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.170-170
• /
• 2013

형광체를 조명과 디스플레이 산업에 응용하기 위해서는 충분히 밝은 빛을 제공하는 형광체의 발광 세기가 중요한 변수이다. 이러한 발광 특성은 주로 모체 격자에 도핑 되는 활성제의 농도, 입자의 형상과 크기 분포의 균일성, 결정성에 따라 달라진다. 본 연구에서는 Ca2SiO4 모체 결정에 도핑한 활성제 Eu3+와 Dy3+ 이온의 농도를 변화시키면서 고상 반응법을 사용하여 높은 발광 효율을 갖는 Ca2-1.5xSiO4::Eux3+ 적색 형광체와 Ca2-1.5xSiO4:Dyx3+ 백색 형광체를 합성하였다. 특히, 활성제 Eu3+와 Dy3+ 이온 농도의 변화가 형광체의 결정 구조, 소성 온도, 입자의 표면 형상, 광학 스펙트럼의 발광 효율에 미치는 영향을 조사하여 최적의 합성 조건을 결정하였으며, 회절 신호의 반치폭과 발광 세기의 상호 관계를 조사하였다. Ca2-1.5xSiO4::Eux3+와 Ca2-1.5xSiO4:Dyx3+ 형광체 초기 분말 시료는 CaO (99.9% 순도), SiO2 (99.9%), Dy2O3 (99.9%)와 Eu2O3 (99.9%)인 화학 물질을 구입하여 초정밀 저울로 화학양론적으로 측정하였다. 이때 Eu와 Dy의 함량비는 x=0, 0.01, 0.05, 0.1, 0.15, 0.2 mol로 변화 시키면서 합성하였다. Ca2-1.5xSiO4: Dyx3+ 형광체 분말 시료의 경우에 소결 온도를 각각 $1000^{\circ}C$와 $1100^{\circ}C$로 달리하여 흡광과 발광 스펙트럼의 세기를 비교해 본 결과, 서로 다른 두 소결 온도에서 합성한 두 형광체 분말은 동일하게 Dy3+의 몰 비가 0.05 mol일 때 주 발광 스펙트럼의 세기는 최대값을 나타내었다. 파장 355 nm로 여기시킨 Dy3+ 함량비에 따른 Ca2-1.5xSiO4:Dyx3+ 형광체 분말의 발광 스펙트럼은 Dy3+ 함량비에 관계 없이 581 nm에서 가장 강한 황색 발광을 보였다. 함량비가 증가함에 따라 발광 스펙트럼의 변화가 관측되었는데, Dy3+의 몰 비가 0.01 mol~0.05 mol인 영역에서는 발광 세기가 증가하여 0.05 mol에서 최대를 나타내다가 Dy3+의 몰 비가 더욱 증가함에 따라 발광세기는 현저히 감소하는 경향을 나타내었는데, 이 현상은 농도 소광 현상으로 해석 할 수 있다. 이외에도, Eu3+와 Dy3+ 이온의 함량비와 소결 온도가 결정 입자의 크기와 흡광 스펙트럼에 미치는 결과를 조사하였다.

• Composites Research
• /
• v.36 no.1
• /
• pp.48-52
• /
• 2023

Fiber-reinforced composites have anisotropic material properties, so the mechanical properties of composite structures can vary depending on the stacking sequence. Therefore, it is essential to design the proper stacking sequence of composite structures according to the functional requirements. However, depending on the manufacturing condition or the shape of the structure, there are many cases where the designed stacking angle is out of range, which can affect structural performance. Accordingly, it is important to analyze the stacking angle in order to confirm that the composite structure is correctly fabricated as designed. In this study, the stacking angle was predicted from real cross-sectional images of fiber-reinforced composites using convolutional neural network (CNN)-based deep learning. Carbon fiber-reinforced composite specimens with several stacking angles were fabricated and their cross-sections were photographed on a micro-scale using an optical microscope. The training was performed for a CNN-based deep learning model using the cross-sectional image data of the composite specimens. As a result, the stacking angle can be predicted from the actual cross-sectional image of the fiber-reinforced composite with high accuracy.

• Korean Journal of Optics and Photonics
• /
• v.32 no.5
• /
• pp.235-243
• /
• 2021

Photobiomodulation (PBM)-based therapy, which uses a phenomenon in which a light source of a specific wavelength band promotes ATP production in mitochondria, has attracted much attention in the fields of biology and medicine because of its effects on wound healing, inflammation reduction, and pain relief. Research on PBM-based therapy has mainly used lasers and light-emitting diodes (LEDs) as light sources and, despite the advantages of organic light-emitting diodes (OLEDs), there have been only a few cases where OLEDs were used in PBM-based therapy. In this research, the skin-care effect of PBM was analyzed using red (λ = 620 nm), green (λ = 525 nm), and blue (λ = 455 nm) OLED lighting modules, and was compared to the PBM effect of LEDs. We demonstrated the PBM-based skin-care effect of the red, green, blue OLED lighting modules by measuring the increase in the amount of collagen type-1 synthesis, the inhibition of melanin synthesis, and the suppression of nitric oxide generation, respectively.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.383-391
• /
• 2003

A new optical security system for the protection of personal identification information is proposed. Personal identification information consisting of a pure face image and an identification number is used for verification and authentication. Image encryption is performed by a fully phase image encryption technique with two random phase masks located in the input and the Fourier plane of 4-f correlator. The personal information, however, can be leaked out in the decryption process. To cope with this possibility, the encrypted image itself is used in the identification process. An encrypted personal identification number is discriminated and recognized by using the proposed MMACE_p (multiplexed MACE_p) filter, and then authenticity of the personal information is verified by correlation of the face image using the optical wavelet matched filter (OWMF). MMACE_p filter is a synthetic filter with four MACE_p (minimum average correlation energy_phase encrypted) filters multiplexed in one filter plane to recognize 10 different encrypted-numbers at a time. OWMF can improve discrimination capability and SNR (signal to noise ratio). Computer simulations confirmed that the proposed security technique can be applied to the protection of personal identification information.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.79-80
• /
• 2014

Most of marine pollution have been occurred by oil spill accidents resulted from ship accidents in South Korea. This year there were two large oil spill accidents: the Yeosu Oil Spill Accident (2014.01.31.(Fri.) 09:35 LT) and the Captain Vangelis L. Oil Spill Accident (2014.02.15.(Sat.) 14:00 LT). In general, Synthetic Aperture Radar (SAR) is used in monitoring and detection of oil dumping and spilled oils by accident at sea. Therefore it is expected that KOMPSAT-5, launched successfully last year, will take part in that mission during a normal operation mode. After the two accidents, high spatial resolution optical satellite data including KOMPSAT-3 were acquired February 2 and 14, 2014. In this presentation, we analyzed optical properties of spilled oils from optical satellite imagery to estimate the spilled area and the volume at each region. Finally, a satellite application planning for ocean surveillance in South Korea will be presented.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.480-484
• /
• 2010

A series of poly(amic acid)s(PAAs) was prepared by reacting 4,4'-(4,4'-isopropylidenediphenoxy) bis(phthalic anhydride)(BPADA) as the anhydride monomer and 2,2'-bis(trifluoromethyl) benzidine (TFB), bis(3-aminophenyl)sulfone (APS), 4,4'-methylenebis-(2-methylcyclohexylamine) (MMCA), or bis[4-(3-aminophenoxy) phenyl] sulfone (BAPS) as the amine monomer with 5 mol% melamine in N,N-dimethylacetamide (DMAc). Colorless and transparent polyimide (PI) films were obtained by casting the PAAs at various heat treatment temperatures. The thermo-mechanical properties and optical transparency of the PI films were investigated. The thermal properties of the PI films were examined using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and thermomechanical analysis (TMA), and their optical transparency were measured by spectrophotometry. The coefficient of thermal expansion (CTE) and yellow index (YI) values of all samples were in the range of $48.53-64.24ppm/^{\circ}C$ and < 3.0, respectively.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.35-44
• /
• 2006

Poly[1-(cholesteryloxycarbonyloxy)ethylene](PCOE) and poly[1-(cholesteryloxycarbonylheptanoyloxy)ethylene] (PCOSE) were prepared by reacting poly(vinyl alcohol) with cholesteryl chloroformate or 8-cholesteryloxycarbonylheptanoly] chloride (CH8C), and their thermal and optical properties were investigated. CH8C formed a monotropic cholesteric phase whereas PCOE and PCOSE exihibited enantiotropic cholesteric phases. Like in the case of CH8C, the optical pitch $(\lambda_m)$ of PCOSE decreased with increasing temperature. PCOE, contrast with PCOSE, did not display reflection colors, suggesting that the helical twisting power or the cholesteryl group highly depends on the length or the spacer joining the cholesteryl group to the main chain. The mesophase properties of PCOE and PCOSE were entirely different from those of poly $(cholesteryl-\omega-acryloyloxyalkanoates)$. The results indicate that the mode of chemical linkage of the side chain group with the main chain plays an important role in the formation, stabilization, and temperature dependence of $\lambda_m$ of the cholesteric mesophase.

• Journal of the Korean Chemical Society
• /
• v.51 no.6
• /
• pp.513-519
• /
• 2007

A vesicle forming polymer, poly(sodium acrylamidoundecanoate) (PSAU) and a water-soluble distyrylbenzene- based fluorophore, TPADSB-C were synthesized and characterized by using UV-vis and photoluminescence (PL) spectroscopy. An inter-chain vesicle formation of PSAU was observed at ~0.01 g/L from N-phenyl naphthylamine fluorescence measurement with changing PSAU concentration in water. Above critical aggregation concentration of PSAU, optical properties of TPADSB-C were investigated to study the microenvironment modulation through dye incorporation in the polymeric vesicle. The emission of TPADSB-C in the presence of PSAU vesicles was blue-shifted and the PL quantum efficiency was increased to 90% due to the microenvironment (e.g. polarity) change in aqueous solution. This study shows that the polymeric vesicle containing molecular fluorophores has a great potential as an efficient, stable and biocompatible labeling tag in biological cell imaging.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.245-250
• /
• 2010

The procedure for estimating the gas (rotational) temperature of an air discharge in supersonic flows is presented in detail. Since direct measurement of the temperature in a supersonic flow is difficult, a nonintrusive measurement was performed by optical emission spectroscopy based on the emission spectra of nitrogen molecular ions. A detailed explanation, including the equations for emission line intensity, is presented in order to understand the structure of the emission spectra of nitrogen molecular ions. Using the obtained representation for emission spectrum, a synthetic spectrum of the first negative system of $N_2^+$ is obtained, and it is compared with the experimentally measured spectrum. Within a relative error of approximately 6.8% for the overall band spectra, the synthetic and measured spectra agree well. In the case of a 25-mA DC air discharge in a supersonic (Mach 3) flow, the gas temperature profile shows an approximately linear variation and a peak temperature of approximately 350 K.