• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.81-85
• /
• 2009

Purpose: The examination of nuclear medicine observes the change in accordance with the time elapsed in the same region purposed and there are many examinations to acquire the image during the same term. At this time, the same parameter should be applied. The hepatobiliary scan, lung scan etc, are the acquired examination in the divided time with a regular term. Pre-set time that is applied in continued next image is set in order to acquire the fixed counts. The same scan time should be applied for each image. This study will look for the rational plan and analyze the change of scan time in accordance with the time of the decision of scan time at examination that pre-set time is applied. Methods: The hapatobiliary scan that use the radio pharmaceutical $^{99m}Tc$-mebrofenin is choosed as compensation from Jan. 2009 to Mar. 2009 in the department of nuclear medicine in ASAN MEDICAL CENTER. Scan is started after 5 minutes from when 222 MBq (6 mCi) is injected to patient. We let patient stand up between both detectors, and possibly close to the front of detector. When scan time reach 10%, 25%, 50%, 75% of total scan time, we measured the expected total scan time. After finishing all of scan, we compared the total scan time and the expected total scan time, while image is acquiring. and we observed the change of scan time in accordance with radio activity by using phantom. Results: After starting scan, a difference of when scan time reach 10%, 25%, 50%, 75% of total scan time is that the biggest difference is 5 seconds on 10%. There statistically is difference between 25% (t:2.88, p<0.01) and 50% (t:2.05, p<0.01). Conclusions: When the same the scan time is applied in the examination that acquire the many frame, concluding the same scan time has a important effect on a quantitative analysis. Although method that decide the scan time after finish all of the examinations, there is a few problem to apply practical affairs. This may cause an inaccurate result on the examination that need a quantitative analysis. We think that operator should try to improve it. At least, after reach 50% of total scan time, deciding the total scan time mean that you can minimize error of a quantitative analysis caused by unmatched scan time from a gap of image.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.70-78
• /
• 2018

Recently, the conservation of mountainous landscape and compensation for diverse demands for mountain areas such as leisure, recreation and welfare are under discussion. The purpose of this study is to investigation the perception of mountainous landscapes by those who view and recognize the landscapes and to estimate economic value by estimating the willingness to pay for the management of mountainous landscapes. This study will provide data for the management of mountainous landscapes. As a result of comparing the perception between the territorial landscape and the mountain landscape, the mountain scenery was 3.96, the management level satisfaction was 3.28, and the management necessity was 4.38, which was higher than the national landscape, while the national landscape was satisfactory but the management level was insufficient. Jeju Island (39.0%) and Gangwon (38.6%) were chosen as the most scenic areas with beautiful forest and mountainous landscape resources. The aesthetic characteristics of the vast skyline of mountain scenery, the background of the area, and the mountainous landscape that forms the landmark were evaluated highly. And, it is considered that consciousness of mountainous landscape management is heightened by 86.8% of respondents, who positively answered the Mountainous Landscape Visual Impact Assessment before the development project. The per capita payment amount for mountainous landscape management was calculated to be 3,742 won and, based on the number of visitors to the mountain National Parks in 2016, it is estimated to have an economic value of about 169.5 billion won. Policymakers have limitations in the mountainous landscape management policies of the administrative subject. Establishing a consensus on the importance and necessity of landscape management by diagnosing the status of public perception is expected to help create more effective policy direction and implement strategies for the management of these areas.

• Tunnel and Underground Space
• /
• v.28 no.5
• /
• pp.400-425
• /
• 2018

This study presents the research results and current status of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to simulate the coupled hydro-mechanical behavior of fault, including slip or reactivation, induced by water injection. The first research step of Task B is a benchmark simulation which is designed for the modelling teams to familiarize themselves with the problem and to set up their own codes to reproduce the hydro-mechanical coupling between the fault hydraulic transmissivity and the mechanically-induced displacement. We reproduced the coupled hydro-mechanical process of fault slip using TOUGH-FLAC simulator. The fluid flow along a fault was modelled with solid elements and governed by Darcy's law with the cubic law in TOUGH2, whereas the mechanical behavior of a single fault was represented by creating interface elements between two separating rock blocks in FLAC3D. A methodology to formulate the hydro-mechanical coupling relations of two different hydraulic aperture models and link the solid element of TOUGH2 and the interface element of FLAC3D was suggested. In addition, we developed a coupling module to update the changes in geometric features (mesh) and hydrological properties of fault caused by water injection at every calculation step for TOUGH-FLAC simulator. Then, the transient responses of the fault, including elastic deformation, reactivation, progressive evolutions of pathway, pressure distribution and water injection rate, to stepwise pressurization were examined during the simulations. The results of the simulations suggest that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing collaboration and interaction with other research teams of DECOLVAEX-2019 Task B and validated using the field data from fault activation experiments in a further study.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.331-343
• /
• 2017

In this study to improve stability, workability and economics of the H-Pile+Earth plate or H-Pile+Earth plate+Cutoff grouting currently in use, we had developed HCS method belonging to the retaining wall which is consisting of a combination H-Pile, Plastic Sheet Pile and Steel Square Pipe for gap maintenance and reinforcement of flexible plastic Sheet Pile, and the behavior of each member composing HCS method is investigated by three-dimensional finite element analysis. To numerically analyze the behavior of the HCS method, we have performed extensive three-dimentional finite element analysis for three kinds of plastic Sheet Pile size, two kinds of H-Pile size and three kinds of H-Pile installation interval, one kinds of Steel Square Pipe and three kinds of Steel Square Pipe installation interval. After analyzing the numerical results, we found that the combinations of $P.S.P-460{\times}131.5{\times}7t$ (PS7) and H-Pile $250{\times}250{\times}9{\times}14$ (H250), $P.S.P473{\times}133.5{\times}9t$ (PS9) and H-Pile $300{\times}200{\times}9{\times}14$ (H300) is the most economical because these combinations are considered to have a stress ratio (=applied stress/allowable stress) close to that as the stiffness of H-Pile, plastic Sheet Pile and Steel Square Pipe composite increased, the horizontal displacement of the retaining wall and the vertical displacement of the upper ground decreased. Especially, due to the arching effects caused by the difference in stiffness between H-Pile and plastic Sheet Pile, a large part of the earth pressure acting on plastic Sheet Pile caused a stress transfer to H-Pile, and the stress and displacement of plastic Sheet Pile were small. Through this study, we can confirm the behavior of each member constituting the HCS method, and based on the confirmed results of this study, it can be used to apply HCS method in reasonable, stable and economical way in the future.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.2
• /
• pp.133-140
• /
• 1999

This pot experiment was conducted to find out the forage productivity and quality in a grass/clover sward as affected by the application of three different fertilizers; double superphosphate(DS), fused Mg-phosphate(FP), and complex fertilizer(CF), on newly reclaimed hilly soil. This 1st part was concerned with the forage yields, yield components and botanical composition. The results obtained are summarized as follows: 1. The significant differences in the yields(relative yields, %) of whole forages and legume were laid in the following increasing order; CF(relative yield: 150.4% in whole forages and 169.7% in ladino clover) > FP(125.4% in whole forages and 121.7% in ladino clover) > DS(100.0%). The yield of orchardgrass was significantly reduced in the DS plot, compared with the yields in the FP and CF plots, whereas these showed no significant differences between the FP and CF plots. 2. In the botanicl composition, it showed that the rates of grass : legume were 48:52% in the DS and FP, and 40:60% in the CF. It was recognized that the application of complex fertilizer contributed to the increasing of the yields of whole forages, and especially legume yield and rate in the mixed sward.

• Korean Security Journal
• /
• no.12
• /
• pp.89-116
• /
• 2006

As the society changes, the Private Security has developed highly in a short time. However, it has brought about various problems. The best urgent problem of those problems is the wage problem. This study is examining into the difference with the wage satisfaction and devotion to organization, and analyzing influence that wage satisfaction has on devotion to organization. According to this research, the first, women appeared higher numerical value than men in satisfaction with a wage level, wage disparity, wage system and the welfare system and the highest age group is over 26 year-old. While the college graduates appeared high satisfaction with a wage level and wage disparity, the university graduates is high satisfaction with wage system and the welfare. This shows that as the scholarship is high, they think they must be getting wages higher and higher as their work result or produce. The second, in devotion to his(her) organization, the men is higher than the women. The third, the men show the high emotional devotion because the men devote to his work on his own initiative while the women show the high continuos service devotion because they are passively. The fourth, over the 26-year old group appeared high level in devotion to his(her) organization, the university graduate group appeared high level both the emotional devotion and the continuous service devotion. The long-term employed person showed the satisfaction with job position, pay grade, and career and also appeared high in devotion to his(her) organization. The fifth, as the scholarship is low, they were concerned about a wage level and wage disparity but, as the scholarship is high, they were concerned about the wage system and the welfare. The wage satisfaction has influence on the scholarship, job position and career therefore, the long-term employed persons showed high wage satisfaction and devotion to his(her) organization. In conclusion, for the development of Private Security and high devotion to organization, the wage level of private security guards must be systematize and the quality of the welfare must be improved. And the many factors about the wage and welfare must be studied and analyzed to occupy as one of the skill lists through the educational-industrial collaboration.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.47-55
• /
• 2005

Roads deeply affect the life of people and keep doing an important role to support economic growth of a country. According to the budget plan of the ministry of construction and transportation of Korea, 8.1 trillion won have been allotted for road investment in the year of 2002 which occupy 61% of the transportation infrastructure special account (13.3 trillion won) and 4.7% of the total national budget (1,740 trillion won). It is true that services generated from road investment such as mobility enhancement and increased accessibility have shown positive effects through shortened travel time and decreased vehicle operating cost. However, it is also notable that many negative effects are gradually being discussed and those are nowadays getting severer due to enhanced people interests about road construction, increased concerns on environment and active public involvement that were evoked by traffic accidents, air pollution & noise and destruction of environment. Road construction processes in Korea are normally governed by administrative sectors (suppliers) not by users. These processes ate very weak to accomodate user s needs and community concerns thus easy to fail finalizing a road project without hassles. A public hearing process is supposed to be held in the processes of detailed design step and the environmental impact analysis. However, it is not enough to grab user's needs and community concerns. Increased public involvement frequencies, optimized public involvement timing and enhanced depth of public involvement magnitude are suggested to improve the current poor public involvement schemes in road planning and design processes. The application of these recommended methods to the road planning and design processes may guarantee the change from the current supplier-oriented schemes to the new user-oriented one. Also, this study suggests to reset objectivity and clarity of road construction process, to make conciliation guidelines based on many practical cases that produced good results, to introduce public involvement techniques in a stepwise basis, and to foster the professionals via education and training programs.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.5
• /
• pp.13-25
• /
• 2012

Ground anchor method is one of the most popular reinforcing technology for slope in Korea. For the health monitoring of slope which is reinforced by permanent anchor for a long period, monitoring of the tension force of ground anchor is very important. However, since electromechanical sensors such as strain gauge and V/W type load cell are also subject to long-term risk as well as suffering from noise during long distance transmission and immunity to electromagnetic interference (EMI), optical FBG sensors embedded tendon was developed to measure strain of 7-wire strand by embedding FBG sensor into the center king cable of 7-wire strand. This FBG sensors embedded tendon has been successfully applied to measuring the short-term anchor force. But to adopt this tendon to long-term monitoring, temperature compensation of the FBG sensors embedded tendon should be done. In this paper, we described how to compensate the effect in compliance with the change of underground temperature during long-term tension force monitoring of ground anchors by using optical fiber sensors (FBG: Fiber Bragg Grating). The model test was carried out to determine the temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon. The determined temperature sensitivity coefficient ${\beta}^{\prime}=2.0{\times}10^{-5}/^{\circ}C$ was verified by comparing the ground temperatures predicted from the proposed sensor using ${\beta}^{\prime}$ with ground temperatures measured from ground thermometer. Finally, temperature compensations were carried out based on ${\beta}^{\prime}$ value and ground temperature measurement from KMA for the tension force monitoring results of tension type and compression type anchors, which had been installed more than 1 year before at the test site. Temperature compensated tension forces are compared with those measured from conventional load cell during the same measuring time. Test results show that determined temperature sensitivity coefficient (${\beta}^{\prime}$) of FBG sensors embedded tendon is valid and proposed temperature compensation method is also appropriate from the fact that the temperature compensated tension forces are not dependent on the change of ground temperature and are consistent with the tension forces measured from the conventional load cell.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.315-322
• /
• 2013

This study was carried out to establish a management program and soil restoration plan through analysis of soil properties and visitor questionnaires in Songrim in Hadong, Korea. Soil bulk density in Songrim was slightly higher in the closed-woodlands ($1.31g/cm^3$) than in the open-woodlands ($1.39g/cm^3$). Soil bulk density in the closed-woodlands was higher in walking trails ($1.74g/cm^3$) than in forest areas ($1.39g/cm^3$), while the rates of pore space were lower in walking trails (42.6%) than in forest areas (50.5%). The soil porosity were lower in the closed-woodlands (34.6%) than in the open-woodlands (42.6%). Soil strength in surface soil was slightly lower in the open-woodlands ($8.5kgf/cm^2$) than in the closed-woodlands ($10.5kgf/cm^2$). The content of organic matter, total nitrogen and exchangeable cations of the woodlands was low compared with the optimum nutrient content for tree growth in Korea forest soil. According to the survey, the objective of visiting in Songrim was to enjoy recreation and landscape views. To conserve pine forest ecosystems in Songrim, the respondents said that it needs to the implement of closed-woodland periods, the establishment of smoking free zone, and the prohibition of garbage throwing and alcohol including disciplinary rules and education. Also the respondents said that pine forest ecosystem in Songrim is relatively sound, but the woodlands require the intensive management to the ecosystem and the introduction of native understory vegetation, such as grasses under pine forest ecosystem. It is recommended to designate the rest-year forest for a proper period in all woodlands to restore the Songrim soil rather than the alternation application between the rest-year for three years or non-rest-year trails, and to open partially the walking trails across the woodlands after the period. In addition, the forest within the woodland is need to designate a long-term rest-year.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.36-50
• /
• 2012

This study was carried out to find contradiction factors on laws for children's activity spaces and facilities and to suggest the rational options to control and manage those spaces and facilities by environmental and landscape planning methods. The results of this study are as follows: 1. The major laws related to the environmental safety for children's activity spaces are "Environmental Health Act (ERA)" for managing the environmental safety of children's activity spaces; "Safety Supervision Law of Children's Play Facilities(SSLCPF)" for the inspection and management for safety of children's play facilities; "Quality Management and Industrial Products Safety Management Law(QMIPSML)" for managing safety certification on children's play equipments. 2. The interior space such as "living room" by the Children's Welfare Law(CWL), "Children Park" by the Act on Urban Parks and Green Spaces(AUPGS), "classroom" on private educational institutes by the Act on Establishment and Operation Private Lesson and Training(AEOPLT) and "nursing room" of child care center smaller than $430m^2$ are needed to be managed as an activity space. 3. In order to reduce industrial burden in the production, establishment, construction, and operation and to minimize unwilling extra burden in the administration effort due to legally double regulate, it is necessary to mitigate the inspections on the equipment certificate from QMIPSML and overlapped or different factors and standards must be unified. With this study, the landscape domain could he enlarged from producing, import of play equipment and establishment, construction and operation of play facilities for a comprehensive range of activity spaces, and the landscape industry such as engineering industry, academic research, management, etc.