• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.52-60
• /
• 2019

The control circuit of the CPP applied to FFX Batch-I and LST-II may be capable of generating a backward pitch even when the grounding phenomenon occurs in the other system. The purpose of this study was to improve the CPP control circuit to maintain the pitch even in the event of grounding. Since the CPP control circuit changes the propeller angle with the voltage difference input, it has a design structure that can be vulnerable if the input voltage fluctuates instantaneously. In order to solve the above problem, a terminating resistor is applied to the end of the control wire and a signal converter is applied between the control wires, as a way to improve the CPP control circuit design. In order to verify that there is no problem in improving the CPP control circuit design, the CPP pitch change control was tested in the actual sailing commissioning with LST-II. Since the command pitch value and the feedback pitch value are very similar to each other, it is confirmed that the CPP control circuit is suitable for the control signal transmission because there is no problem in transmitting the control signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.134-145
• /
• 2021

It is common to optimize the propulsion control system through a so-called tuning process that modifies the parameter values of the propulsion control software during a ship commissioning. However, during this process, if the error of the initial setting value is large, the tuning time may take too long, or the propulsion equipment can be seriously damaged. Therefore, we conducted research on the design of a propulsion controller that applied a Processor lever controller even for inexperienced people with relatively little experience in tuning propulsion control software to be able to reduce the tuning time while protecting the propulsion system. Through simulation, by comparing the execution result of propulsion control lever commands through the PI controller without applying the Processor lever controller. We analyzed the improvement of the Overshoot and propulsion performance. The simulation results showed that the safety of the propulsion system increased because Overshoot of approximately 9.74%, which occurred when the Processor lever function was not applied.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.91-98
• /
• 2010

The Korean navy has been using the ICS(Integrated Communication System) to transfer a command, control and information on the naval ship. The major equipment for the ICS has been imported from abroad, so that there were some problems such as lack of logistics support, leaking military secrets. This paper describes considerations for the development and the key technology of the domestic ICS which is developed to solve the problems mentioned above and to integrate various future communication elements on the naval ship.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.443-446
• /
• 2004

추진기에 의한 소음은 선형 특성에 의한 반류 분포, 추진기 재질 및 유체 연동 등 다양한 주변 인자들에 의해 발생하여, 민수용 선박의 경우는 과도한 추진기 수중 방사 소음으로 해양 생태계 교란 및 선박 거주구역 내 과대 소음 형성의 주 요인이 된다. 더구나, 군사용 함정의 경우에는 추진기 유기 소음은 수중 방사소음의 형태로 전파되어 함정/무기 자체에 탑재된 음향센서의 기능을 저하시키는 영향을 줄 뿐 아니라, 원거리까지 전파되는 수중소음으로 인해 치명적인 자기 노출이 되어 적 함정에 의한 피탐 거리 증대라는 전술적 취약점을 초래하는 중요한 요소이다. 본 발표는 삼성 공동수조(SCAT)에서 이루어지는 추진기 유기 소음 측정에 대한 기술적 사항과 모형선-추진기 수조 시험을 통해 구해진 추진기 유기음향과 이론 및 경험식을 토대로 계산된 추진기 소음의 정량/정성적 비교를 통해, 추진기 설계 단계에서 소음수준 예측 도구로의 활용 가능성을 제시하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.6
• /
• pp.383-389
• /
• 2013

Analysis and review of survivability is one of the most important aspects when naval vessels are designed. Because aiming points of threat towards the naval vessels in the battle field could not be estimated exactly, probabilistic and statistic approach is frequently introduced to evaluate and enhance the vessel survivability. Some commercial survivability analysis programs are used to perform the analysis for enhancement of susceptibility, vulnerability and recoverability but, they are usually classified and impossible to be exported to other countries because of their national security. In this paper, a simplified vulnerability analysis program is developed to evaluate the vulnerability of the warship in aspects of structure, redundancy and its mission capability at the conceptual design stage. To verify the developed program, the analysis results were compared with those of the commercial program MOTISS(Measure of Total Integrated System Survivability).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.60-69
• /
• 2001

전달정렬은 MINS와 SINS의 비정렬 요소를 칼만필터로 추정하는 기법으로서 본 논문에서는 속도 및 자세정합 칼만필터 설계 결과를 제시하였다. 그리고 설계된 칼만필터는 항법컴퓨터에 실현되어 성능평가가 실행되었는데 성능평가 방법은 실제 함정에서 시험의 어려운 점을 고려하여 실험실에 설치된 3축 각운동 시뮬레이터를 이용하는 방법을 제시하였다. 이러한 성능평가 결과는 전달정렬 설계과정에서 예측되었던 성능 및 특성과 일치하였다.

• Journal of the Korean Magnetics Society
• /
• v.24 no.4
• /
• pp.123-127
• /
• 2014

We developed a digital 3-axis flux-gate magnetometer for magnetic field signal measurement from warship during demagnetizing and degaussing processes. For the magnetometer design, we considered following points; the distance between magnetic field measurement station and magnetometer located under sea is about several 100 m, the magnetometer is exposed to magnetic field of ${\pm}1mT$ during demagnetizing process, and magnetometer is located under the sea about 30 m depth. To overcome long distance problem, magnetometer could be operated on wide input supply voltage range of 16~36 V using DC/DC converter, and for the data communication between the magnetometer and measurement station a RS422 serial interface was employed. To improve perming effect due to the ${\pm}1mT$ during demagnetizing process, magnetometer could be compensated external magnetic field up to ${\pm}1mT$ but magnetic field measuring rang is only ${\pm}100{\mu}T$. The perming effect was about ${\pm}2nT$ under ${\pm}1mT$ external magnetic field. The magnetometer was tested water vessel with air pressure up to 6 bar for the sea water pressure problems. Linearity of the magnetometer was better than 0.01 % in the measuring range of ${\pm}0.1mT$ and noise level was $30pT/\sqrt{Hz}$ at 1 Hz.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.1
• /
• pp.31-38
• /
• 2005

This paper is focused on the research of environmental and human factors for a design of PMVbased air conditioning system in the ship. In the results from environmental factor research, it is possible to dissatisfy thermally in the wheel house and communication room of 25 ton and engine room of 100 ton. The clothing and activity in the ship is modified using inland indoor characteristics. Thermal resistance of clothing may be more sensitive to PMV(predicted mean vote) than metabolic rate because of large deviation among maritime polices. The distribution of human factor is right long-tailed than standard normal distribution.

• Convergence Security Journal
• /
• v.20 no.2
• /
• pp.123-135
• /
• 2020

Since AlphaGo's Match in 2016, there has been a growing calls for artificial intelligence applications in various industries, and research related to it has been actively conducted. The same is true in the military field, and since there has been no weapon system with artificial intelligence so far, effort to implement it are posing a challenge. Meanwhile, AlphaGo Zero, which beat AlphaGo, showed that artificial intelligence's self-training data-based approach can lead to better results than the knowledge-based approach by humans. Taking this point into consideration, this paper proposes to apply Reinforcement Learning, which is the basis of AlphaGo Zero, to the Shipboard Combat System or Combat Management System. This is how an artificial intelligence application to the Shipboard Combat System or Combat Management System that allows the optimal tactical assist with a constant win rate to be recommended to the user, that is, the commanding officer and operation personnel. To this end, the definition of the combat performance of the system, the design plan for the Shipboard Combat System, the mapping with the real system, and the training system are presented to smoothly apply the current operations.

• Journal of the military operations research society of Korea
• /
• v.33 no.2
• /
• pp.17-29
• /
• 2007

This work describes a basic process of OMS/MP in guided weapons on board ship. The OMS/MP which provided basic data of ROC & RAM analysis must be prepared by user But data acquisition Quantified by specific operational environment of ship and related preparing instructions which are not established are now insufficient of reliable weapon systems acquisition. The OMS/MP is an important area that become measures of Acceptance Test and doctrine considering future battlespace environment From a development of the OMS/MP template that describe systematically and as quantitative of shipped guided weapons, combat developer oriented product development & reliable weapon system acquisition are ta be accomplished. This research developed OMS/MP preparation templete that presented quantified OMS/MP derivation and RAM target value calculation process which provide optimum weapon systems design concept to research developers