• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.87-93
• /
• 2011

FSSA(Fine Sun Sensor Assembly) is the important sensor for satellite attitude control. FSSA measures the direction of the sun's rays and determines whether the satellite is in the eclipse or not. FSSA for GEO Satellite is also used to acquire the attitude error information in the attitude control reference frame and acquire the Sun direction during transfer orbit or mission Process. This paper shows the configuration of Fine Sun Sensor for LEO and GEO Satellite and their principle of operation that angle measurement is obtained by using the transfer function which is the ratio of the difference between output currents of Solar Cell to the sum of all output currents.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.6
• /
• pp.81-90
• /
• 1990

유체 동역학에서, 난류에 의해 수중 구조물에 가해지는 압력과 전단력의 측정은 중요한 문제이 다. 이러한 유체의 흐름에 의한 압력과 전단력, 나아가 유체의 흐름방향까지 시간과 거리의 함수로 측정 할 수 있는 새로운 탄성표면파 센서가 개발되었다. 센서는 압축 인장형 전단력을 받는 두 개의 표면파 와 흐르는 유체 속의 표면파의 속도차는 또한 유체흐름에 의해 가해지는 압력에 비례한다. 정지류 속의 표면파와 흐르는 유체 속의 표면파의 속도차는 또한 유체흐름에 의해 가해지는 압력에 비례한다. 이 센 서를 응력 로젯과 같이 배열하면 유체의 진행방향도 함께 측정할 수 있다. 표면파 센서는 넓은 주파수 대역에 걸쳐 사용이 가능하므로, 적절히 설계하면 유체의 흐름에 의한 표면력과 유체의 진행방향을 동 시에 거리와 시간의 함수로서 국부적으로, 광역적으로 측정할 수 있다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.8
• /
• pp.842-852
• /
• 2010

RFID applications use tags to identify objects, but recent applications tend to include diverse sensor devices such as light, temperature, and humidity sensors as well. RFID tag information is usually processed via the event driven model. However sensor devices are usually accessed via the functional call model. Therefore application developers have to deal with mixed data access models and device dependent interface functions. In this paper, we propose a sensor reader emulator that provides a consistent access interface to sensor devices regardless of the types of devices. SRE provides a more efficient way of developing RFID applications by providing a single application programmer's view to RFID tags and sensor devices. In applications where tags are fixed to a place, SRE can replace expensive sensor tags and sensor readers with inexpensive sensor devices reducing the total cost while providing the same functionality.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.189-190
• /
• 2006

본 논문에서는 유비쿼터스 사회로의 출발점인 '홈네트워크'를 구축하는데 있어서 가장 기본이 되는 홈서버와 센서간의 인증을 구현하는데 목적을 두었다. 홈 서버와 센서간에 통신을 할 때 해쉬함수 중 MD5를 통해 그룹키를 생성하고 그룹키를 조도센서에 적용하여 서버와 센서간의 인증이 이뤄지는 것을 확인하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.181-190
• /
• 2014

The underwater acoustic lens system is one of the systems getting high-resolution images on the seafloor by the beam forming method using acoustic lens. The beam forming using acoustic lenses reduces complexity and driving power. When receiving an incoming beam with the acoustic lens array, beam pattern analysis and arrangement problem of the array sensor must be addressed. Introducing SIR (Signal to Interference Ratio), the relationship among sensor interval, beam pattern and image quality would be analyzed. Generally if the sensor interval getting wider, the less effect of the side lobes makes SIR high. If the amplitude of a side lobe is high, SIR is generally getting low. The type of the apodization function changes the width, shape and amplitude of both main lobe and side lobes. Thus an appropriate apodization function can improve SIR. In this paper, SIR is stable at the sensor interval of 13mm with 0-10dB, which is not high relatively. By applying the Chebyshev function, the SIR becomes 80dB over the sensor interval of 37 mm or higher. The Hann and triangular functions demonstrate better SIR when the sensor interval becomes narrower.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.273-286
• /
• 2008

Underwater acoustic sensor array can detect acoustic signal in underwater and the sensor array can be mounted in each left, right or front side of the UUV(Unmanned Underwater Vehicle). The sensor array could be conformal array and effected turbulent boundary layer flow noise. Therefore, in this paper numerical simulations were performed to know the how the outer flow noise affect the hydrophone which embedded in the elastomer. Corcos wall pressure model was used as turbulent boundary layer flow noise and this model was applied to the frequency density function. Characteristics of transfer function according the kx wave number were simulated and design parameters were thickness of elastomer, density, and modulus of elasticity. Based on the simulation results when increasing the thickness of elastomer noise reduction was increased. This results can be applied to the design of conformal array of UUV.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.311-319
• /
• 2008

Evaluation of an amplitude domain reflectometry (ADR) type soil moisture sensor as ThetaProbe ML2x using the response of frequency impedance was performed in a variety of soil porous media such as Jumunjin standard sand, weathered granite soil at Sangju area, and weathered gneiss soil at Jangsu area. The tested soils were classified with a dried condition and a wetted condition for comparing with soil volumetric water content under different installed depths of the measurement sensor. In the results the part of measurement rod including one signal rod and three shield rod 6cm in length was found to decrease the variation of measurement output voltage with insert 5cm over into the soil porous media. The measurement output voltage was verified to more stable output voltage under weathered granite soils and weathered gneiss soils contained the fine grain materials such as clay and silt minerals than the gradual grain material like as the standard sands. Therefore, measurement values by soil moisture sensor can be offered the more stable values when an contact volume between soil porous media and measurement sensor increase.

• Journal of the Korean Society of Radiology
• /
• v.16 no.2
• /
• pp.151-156
• /
• 2022

A detector using a small number of photosensors was designed, and the position of a scintillation pixel that interacted with gamma rays through a maximum likelihood position estimation(MLPE) was measured as a digital position. For this purpose, simulation was performed using DETECT2000, which can simulate the movement of light within the scintillator, and the accuracy of position measurement was evaluated. A detector was configured using a 6 × 6 scintillation pixel array and 4 photosensors, and a gamma ray event was generated at the center of each scintillation pixel to create a look-up table through the ratio of acquired light. The gamma-ray event generated at the new position was applied as the input value of the MLPE, and the positiion of the scintillation pixel was converted into a digital positiion after comparison with the look-up table. All scintillation pixels were evaluated, and as a result, a high accuracy of 99.1% was obtained. When this method is applied to the currently usesd system, it is concidered that the process of determining the position of the scintillation pixel will be simplified.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.11
• /
• pp.572-580
• /
• 2007

Wireless sensor networks are sensing, computing and communication infrastructures that allow us to monitor, instrument, observe, and respond to phenomena in the harsh environment. Generally, the wireless sensor networks are composed of many deployed sensor nodes that were designed to be very cost-efficient in terms of production cost. For example, UC Berkeley's MICA motes have only 8-bit CPU, 4KB RAM, and 128KB FLASH memory space. Therefore, sensor operating systems that run on the sensor nodes should be able to operate efficiently in terms of the resource management. In this paper, we present a dynamic threads stack management scheme for space-constrained and multi-threaded sensor operating systems. In this scheme, the necessary stack space of each function is measured on compile-time. Then, the information is used to dynamically allocate and release each function's stack space on run-time. It was implemented in Nano-Qplus sensor operating system. Our experimental results show that the proposed scheme outperforms the existing fixed-size stack allocation mechanism.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.19-19
• /
• 2019

토양수분은 지표수가 증발, 유출, 침투되는 과정에 중요한 역할을 하는 수문 인자로, 수문학적인 관점에서 물 순환을 이해하는 데 필수적인 요소이다. 그럼에도 불구하고 토양 내 수분을 측정하는 데 어려움이 많아 국내에서는 토양수분의 지속적인 관측을 위한 관측소 운영이 원활하게 이루어지지 않고 있으며, 주로 유전율식 계측 방식을 통해 지점 기반의 토양수분 자료를 생산하는데 그치고 있다. 최근 발사된 토양수분 위성인 SMAP (Soil Moisture Active Passive)을 비롯한 위성기반의 토양수분 자료와 융합하여 사용하기 위해서는 지점에서의 토양수분 네트워크가 우선적으로 구축되어야 하나, 관측소의 수도 부족할 뿐 아니라, 지형이 복잡하고 산지가 많은 한반도에서는 점 단위의 토양수분 자료의 공간적 대표성이 부족하여 활용에 어려움이 많다. 따라서 본 연구에서는 운영중인 지점 기반의 토양수분 관측소의 FDR (Frequency Domain Reflectometry), TDR (Time Domain Reflectometry) 센서를 함께 활용하여 산악지형에서의 Cosmic-ray 기반 토양수분자료를 생산하고자 한다. 산악지형에서의 Cosmic-ray 센서는 토양 유기물과 식생 차단 등에 의한 영향이 많으므로 평지에서 토양수분을 산정하기 위한 교정 함수들의 비교 및 평가를 실시하였다. 일반적으로 평지에서 활용되는 교정 함수들은 강우에 따른 토양수분의 거동을 잘 나타내고 있는 것으로 확인되었으나, 갑작스러운 강우로 인한 식생 차단과 토양 유기물의 영향이 커지는 경우 토양수분의 급격한 변동성을 표현하기에는 한계가 있는 것으로 나타났다. 이러한 연구를 기반으로 산악지형에서 Cosmic-ray 센서에 영향을 미치는 인자들을 분석할 수 있으며, 추후 산악지형에서 지역 규모의 토양수분을 관측할 수 있는 관측소를 구축하는데 활용될 것으로 기대된다.