• 제목/요약/키워드: 할로이사이트

검색결과 49건 처리시간 0.02초

에폭시 기지 입자 강화 GFRP를 사용한 계단형 패치 보수법이 고온 고습 환경하에서 재료의 물성 회복에 미치는 영향 (Effect to Material Strength Recovery of Stepped Patch Repair with Epoxy based Particle Reinforced GFRP Composites under Hygrothermal Environment)

  • 정경석;박수정;김윤해
    • Composites Research
    • /
    • 제31권3호
    • /
    • pp.88-93
    • /
    • 2018
  • 본 연구에서는 입자크기가 서로 다른 할로이사이트 나노튜브(Halloysite nanotube, HNT)와 밀드 카본(Milled carbon, MC) 강화 복합재료를 사용하여 손상된 복합재료 적층판을 계단형 패치 보수법에 따라 수리하고, 손상된 면과 수리면 사이의 접합 계면에 입자가 미치는 기계적, 구조적 영향을 분석하였다. 이 때, 고온고습의 가혹한 수분 환경에 장시간 노출시켜 손상된 판을 형성하는 기존 재료와의 상대적인 재료 물성 회복률을 비교하였으며 기계적 물성 시험을 통해 성능평가를 실시하였다. 그 결과 $70^{\circ}C$ 고온 증류수에서 HNT는 입자 첨가량에 따라 흡습률이 MC에 비해 뚜렷한 차이를 보였으며 인장강도와 굽힘강도의 경우, 대체적으로 HNT로 강화된 복합재를 사용하여 보수한 시험편이 흡습 전과 후 모두 높은 수치를 나타냈다. 특히, 0.5, 1 wt. %의 HNT가 첨가되었을 때 흡습률이 가장 적었고 이는 기계적 강도 증가에 관여하는 하나의 요인으로 작용하였다. 반면 MC는 소량만으로도 높은 흡습 저항성을 나타냈으며 하중의 방향에 따라 강도의 차이가 발생했다.

가야 지역 보성 고령토의 광화작용 및 광물 특성 (Mineralization and Characterization of Boseung Kaolin in Gaya Area)

  • 노진환
    • 한국광물학회지
    • /
    • 제21권4호
    • /
    • pp.397-413
    • /
    • 2008
  • 가야 지역 보성 고령토 광상은 전반적인 회장암질 모암의 풍화양상과 더불어 국지적으로 하향 심화되는 고령토 광화양상, 특징적인 열수변질물(일라이트 및 스틸바이트)의 수반, 고령토 광물들의 광물상 관계 등으로 보아 열수변질-풍화잔류 혼성형 기원에 의해서 형성된 것으로 해석된다. 고령토 광석들은 그 산출상태와 광물조성 및 광물특성의 차이에 의해서 5가지 유형들로 구분될 수 있다. 이들 중에서 2종은 고령토 광물들 함유도가 대개 80% 이상인 고품위 광석형이고, 그 이하의 품위를 갖는 저품위 광석들은 사장석 잔류물을 다량 수반하거나 일라이트-질석-스틸바이트와 같은 독특한 불순물 광물상을 이룬다. 보성 고령토는 고령석과 할로이사이트가 공존하는 고령토 광물상을 보일 뿐만 아니라 그 결정도 및 결정형에 있어서도 다양한 양태를 이룬다. 보성 고령토의 광물상 및 결정상에 있어서의 다양성은 기본적으로 그 생성기원상의 복잡성에 기인한 것으로 여겨진다. 이 같은 다양한 광물상 및 결정도와 더불어 화학적 품질 요건, 열적 특성, 백색도 및 점성도 등과 같은 제반 응용광물학적 특성도 보성 고령토의 품질 기준상 불리한 여건을 가중시키는 것으로 평가된다.

콩즙을 이용한 면직물의 황토염색 -면직물에 부착된 황토의 성분분석을 중심으로- (Dyeing of Cotton Fabrics with Loess Using Soybean Milk - The Compositions of Loess Deposited on the Cotton Fabrics -)

  • Kim, Soo-Jung;Ryu, Hyo-Seon
    • 한국의류학회지
    • /
    • 제25권10호
    • /
    • pp.1770-1778
    • /
    • 2001
  • 황토는 대표적인 천연 무기염재의 일종으로서 바람에 의해 운반되어 퇴적된 담황색 내지는 황회색을 띠는 실트질의 퇴적물을 일컫는다. 황토의 구성물질은 주로 석영, 장석, 산화철광물, 깁사이트 등의 여러 가지 점토광물을 포함하는데, 주로 적색을 띠는 것은 소량의 산화철 광물에 기인되는 경우가 많으며 황토를 구성하는 점토광물로는 버미큘라이트, 카오린 광물인 캐올리나이트와 할로이사이트, 일라이트 등이 있다. 본 연구에서는 면직물에 천연 무기염재인 황토를 사용한 염색시에 황토 단독염색과 콩즙 전처리 후 황토염색으로 나누어 염색을 실시하고, 원료 황토와 황토염색 후 면직물에 부착된 성분 간에 차이가 있는지를 확인하기 위해 X선 형광분석(X-ray fluorescence analysis, XRF)을 이용하여 염색 전.후 황토의 성분을 분석하였고, X선 회절분석(X-ray diffraction analysis, XRD)을 이용하여 황토 및 염색 전 후 면직물에 부착된 광물질의 주성분을 분석하였으며, energy dispersive spectrometer (EDS)가 장착된 주사전자현미경을 이용하여 면직물에 부착된 광물의 성분을 조사하였다. 그 결과, 황토로 면직물을 염색하는 경우 면직물에 부착되는 황토의 양과 K/S 값은 거 의 비례하여 증가하는 것으로 나타났다. 황토 염색 후 면직물에 부탁되는 주성분은 주로 SiO$_2$, A1$_2$O$_3$, Fe$_2$O$_3$등인 것으로 나타났으며, X선 회절분석과 EDS분석에 의해 캐올리나이트, 일라이트 등의 점토광물의 형태로 존재하는 것이 확인되었다.

  • PDF

지르코니아를 담지한 할로이사이트 나노튜브를 충진재로 이용한 에폭시 복합체의 기계적 열적 특성 분석 (Analysis of Mechanical and Thermal Properties of Epoxy Complex using Zirconia Supported Halloysite Nanotubes as Filler)

  • 김문일
    • 한국산업융합학회 논문집
    • /
    • 제25권3호
    • /
    • pp.461-466
    • /
    • 2022
  • Epoxy resins are widely used in various industrial fields. However, they suffer from brittleness, an issue that must be addressed for further applications. To solve this problem, additional fillers are needed to improve the mechanical and thermal properties of the resins; zirconia is one such filler. However, it has been reported that aggregation may occur in the epoxy composites as the amount of zirconia increases, preventing enhancement of the mechanical strength of the epoxy composites. Herein, to reduce the aggregation, zirconia was well dispersed on halloysite nanotubes (HNTs), which have high thermal and mechanical strength, by a conventional wet impregnation method using zirconyl chloride octahydrate as a precursor. The mechanical and thermal strengths of the epoxy composites with The zirconia impregnated HNTs (Zr/HNT) were investigated. Zr/HNT were characterized by Scanning electron microscope (SEM), transmittance electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy. The thermal strength of the epoxy composites was studied by thermomechanical analysis (TMA) and the mechanical strength of the epoxy composites (flexural strength) was studied by using a universal testing machine (UTM). The mechanical and thermal strengths of the epoxy complex with Zr/HNT were improved compared to those of the epoxy complex with HNT, and also increased as the content of Zr/HNT increased.

우리 나라 황토(풍화토)의 구성광물 및 화학성분 (Mineralogy and Chemical Composition of the Residual Soils (Hwangto) from South Korea)

  • 황진연;장명익;김준식;조원모;안병석;강수원
    • 한국광물학회지
    • /
    • 제13권3호
    • /
    • pp.147-163
    • /
    • 2000
  • The mineralogy and chemical composition of reddish to brownish yellow residual soils, so called "Hwangto" have been examined according to representative host rocks. The result of the study indicates that Hwangto consists of 40-80% clay minerals and various minerals such as quartz, feldspar, hornblende, goethite, and gibbsite. Clay minerals include kaolinite, halloysite, illite, hydroxy interlayered vermiculite (HIV), mica/vermiculite interstratifield mineral and chlorite. The mineralogical constituents and contents of Hwangto were different depending on the types of host rocks. Moreover, the Jurassic granitic rocks contain relatively more kaolin minerals, whereas the Cretaceous granitic rocks contain more HIV and illite. In addition, reddish Hwangto contains relatively more kaolinite and HIV, and yellowish Hwangto contains more illite and halloysite. It is suggested that feldspars and micas of host rocks were chemically weathered into illite, halloysite, illite/vermiculite interstratified minerals, and HIV, and finally into kaolinite. Compared with their host rocks, the major chemical compositions of Hwangto tend to contain more $Al_2O_3,\;Fe_2O_3,\;H_2O$ in amount and less Ca, Mg, and Na. Hwangto contains relatively high amount of trace elements, P, S, Zr, Sr, Ba, Rb, and Ce including considerable amount of Li, V, Cr, Zn, Co, Ni, Cu, Y, Nb, La, Nd, Pb, Th in excess of 10 ppm. Relatively high amount of most trace elements were detected in the Hwangto. The major and minor chemical compositions of the Hwangto were different depending on the types of host rocks. However, their difference was in the similar range compared with the compositions of host rocks.

  • PDF

명반 및 수산화 알루미늄을 이용한 명반 및 수산화 알루미늄을 이용한 ${\alpha}-Al_2O_3$의 합성 (II) 열분해법에 의한 초미분 ${\alpha}-Al_2O_3$ (Alum and Hydroxide Routes to ${\alpha}-Al_2O_3$ (II) Ultra-Fine Alumina by Thermal Decomposition)

  • 최진호;유종석;김진태;이창교;이낭호
    • 대한화학회지
    • /
    • 제35권4호
    • /
    • pp.422-426
    • /
    • 1991
  • 천연 규산 알루미늄 광인 할로이사이트 광물로부터 고순도 ${\alpha}-Al_2O_3$을 합성하기 위해 ${\alpha}-Al_2O_3$의 전구물질인 수산화 알루미늄과 암모니움 명반을 합성하였다. 이들에 대한 열분해 반응기구는 열분석, XRD 및 IR 측정으로부터 규명되었고, 열분해로부터 얻어진 ${\alpha}-Al_2O_3$의 미세구조 및 비표면적은 SEM 및 BET 측정에 의해 수행되었다. 이때 ${\alpha}-Al_2O_3$ 입자의 크기는 모두 ${\phi}$ = 0.1∼0.5 ${\mu}$m이었으나, 비표면적의 크기는 암모니움 명반으로부터 얻어진 경우(89.0 m$^2$/g)가 수산화 알루미늄으로부터 얻어진 경우(7.3 m$^2$/g)보다 매우 높은 결과를 얻었다.

  • PDF

일라이트, 할로이사이트에 대한 중금속 원소의 흡착특성 (Adsorption Behaviors of Metal Elements onto Illite and Halloysite)

  • 추창오;김수진;정찬호;김천수
    • 한국광물학회지
    • /
    • 제11권1호
    • /
    • pp.20-31
    • /
    • 1998
  • Adsorption of metal elements onto illite and halloysite was investigated at $25^{\circ}C$ using pollutant water collected from the gold-bearing metal mine. Incipient solution of pH 3.19 was reacted with clay minerals as a function of time: 10 minute, 30 minute, 1 hour, 12 hour, 24 hour, 1 day, 2 day, 1 week, and 2 week. Twenty-seven cations and six anions from solutions were analyzed by AAs (atomic absorption spectrometer), ICP(induced-coupled plasma), and IC (ion chromatography). Speciation and saturation index of solutions were calculated by WATEQ4F and MINTEQA2 codes, indicating that most of metal ions exist as free ions and that there is little difference in chemical species and relative abundances between initial solution and reacted solutions. The adsorption results showed that the adsorption extent of elements varies depending on mineral types and reaction time. As for illite, adsorption after 1 hour-reaction occurs in the order of As>Pb>Ge>Li>Co, Pb, Cr, Ba>Cs for trace elements and Fe>K>Na>Mn>Al>Ca>Si for major elements, respectively. As for halloysite, adsorption after 1 hour-reaction occurs in the order of Cu>Pb>Li>Ge>Cr>Zn>As>Ba>Ti>Cd>Co for trace elements and Fe>K>Mn>Ca>Al>Na>Si for major elements, respectively. After 2 week-reaction, the adsorption occurs in the order of Cu>As>Zn>Li>Ge>Co>Ti>Ba>Ni>Pb>Cr>Cd>Se for trace elements and Fe>K>Mn>Al, Mg>Ca>Na, Si for major elements, respectively. No significant adsorption as well as selectivity was found for anions. Although halloysite has a 1:1 layer structure, its capacity of adsorption is greater than that of illite with 2:1 structure, probably due to its peculiar mineralogical characteristics. According to FTIR (Fourier transform infrared spectroscopy) results, there was no shift in the OH-stretching bond for illite, but the ν1 bond at 3695 cm-1 for halloysite was found to be stronger. In the viewpoint of adsorption, illite is characterized by an inner-sphere complex, whereas halloysite by an outer-sphere complex, respectively. Initial ion activity and dissociation constant of metal elements are regarded as the main factors that control the adsorption behaviors in a natural system containing multicomponents at the acidic condition.

  • PDF

제주도 탐라층의 구성광물 (Mineral Composition of the Tamna Formation, Jeju Island)

  • 현원학;황진연;이진현;손병서;오지호;양경희;김광희
    • 암석학회지
    • /
    • 제25권4호
    • /
    • pp.335-348
    • /
    • 2016
  • 제주도의 전 지역에 걸쳐 넓게 분포하고 있는 하성 퇴적층인 탐라층은 역암, 사암, 이암 등으로 구성되어 있다. 대부분의 탐라층 이암 내에 다양한 크기의 석영이 다량 함유하는 것이 확인되었다. XRD 분석의 결과, 탐라층에는 석영, 사장석, 칼륨장석, 운모, 자철석, 적철석, 감람석, 휘석, 깁사이트, 방해석, 아날심, 그리고 점토광물로서 일라이트, 카올린나이트, 버미큘라이트, 스멕타이트, 녹니석, $10{\AA}$-할로이사이트 등의 다양한 광물들이 산출되었다. 석영이 많은 곳일수록 카올린나이트, 버미큘라이트, 녹니석의 함량이 많아지는 경향이 나타났다. 이상의 결과들로 보아 탐라층의 근원암은 제주도의 화산암에서 기원된 것만이 아니며, 석영을 다량 함유한 기반암이 포함된 것으로 사료된다. 따라서 탐라층은 이전에 존재했던 기반암과 함께 제주도 화산암류의 물질들이 첨가되어 퇴적된 후, 속성작용, 열수작용, 풍화작용 등의 변질작용을 받아 형성된 것으로 생각된다.

하동군 옥종 지역에서 산출되는 황토의 구리 흡착 특성 (The Copper Adsorption onto 'Hwangto′ in the Okjong Area, Hadong)

  • 조현구;양도열;김영호
    • 한국광물학회지
    • /
    • 제16권4호
    • /
    • pp.321-331
    • /
    • 2003
  • 경남 하동군 옥종 일대에서 회장암의 풍화산물로 산출되는 황토에 대하여 깊이에 따른 광물 조성의 변화와 구리 흡착 특성에 대하여 연구하였다. 지표로부터 10 cm, 25 cm, 2∼3 m 및 3 m 이하에서 채취한 시료를 정량 XRD 분석한 결과 대부분의 시료는 카올리나이트와 할로이사이트로 구성되어 있었다. 상부에서 채취한 시료에는 침철석이나 깁사이트 같은 수산화 철­알루미늄 광물이 포함되어 있는데 반하여 하부에서 채취한 시료에는 이 광물들이 거의 포함되어 있지 않았다. 석영의 함량은 심도가 얕을수록 그 양이 많아지고, 카올리나이트의 함량은 반대되는 경향을 가진다. 구리용액의 흡착 실험 결과, pH 4부터 제거량이 급증하기 시작하여 pH 6에 도달하면 90%에 도달하며, pH 7 이상일 될 경우 99% 이상 제거됨을 알 수 있다. 광물 조성의 차이가 흡착­제거 특성에 어느 정도 영향을 미치는 것으로 판단된다. 구리 이온의 농도가 높은 경우, 흡착 실험 결과와 MINTEQA2 프로그램에 의한 계산값은 잘 일치하였다. 그러나 구리 이온의 농도가 묽어질수록 일치하는 정도는 감소하였다. 이번 연구의 결과 침전은 구리 이온의 제거에 매우 결정적인 역할을 하는 것으로 밝혀졌으며, 구리 이온의 농도가 진한 경우 그 양상은 특히 더 심하였다. 구리 이온의 농도가 묽은 경우 실험값과 계산값 사이의 불일치는 변수값들의 선택, 충분하지 못한 반응 시간, 반응 자리에 대한 철저하지 못한 고려 등 여러 가지 원인이 있을 것으로 판단된다.

전남 나주시 장동리 지역에 노출된 적갈색 점토-실트 퇴적물의 광물 및 지화학적 특성 (Mineralogical and Geochemical Properties of Clay-silt sediments Exposed in Jangdongri, Naju, Korea)

  • 곽태훈;정기영
    • 한국광물학회지
    • /
    • 제30권1호
    • /
    • pp.11-19
    • /
    • 2017
  • 전남 나주시 장동리 지역의 화강암 풍화대를 피복하는 적갈색 점토-실트 퇴적물 단면(~2 m)에 대하여 광물학적 및 지화학적 특성 분석을 실시하였다. 퇴적물은 주로 석영(50%)과 점토광물(45%)로 구성되어 있으며, 소량의 K-장석, 침철석, 적철석, 깁사이트로 구성되어 있다. 점토광물은 일라이트(일라이트, 일라이트-스멕타이트 혼합층), 질석(질석, 수산화-Al 질석), 고령석(캐올리나이트, 할로이사이트) 계열의 점토광물로 구성되어 있다. 광물 및 화학조성의 수직 함량변화는 미미하며, 사장석과 녹니석이 전반적으로 결핍되어 있으나 최상부에 소량 함유되어 있다. 점토광물의 주성분이 일라이트 계열이므로 퇴적물의 기원물질은 주변 고령토질 화강암 풍화물이 아니라, 먼 기원지에서 유래한 풍성퇴적물로 판단된다. 현생 황사의 광물조성과 비교하면, 퇴적 후의 심한 화학적 풍화작용으로 사장석과 K-장석이 거의 없어지고, 석영과 점토광물로 구성된 광물학적 특성을 갖게 되었다. 풍화과정에서 사장석과 녹니석은 각각 고령토 광물과 질석으로 변질되었으며, 함철 유색광물의 풍화과정에서 침철석과 적철석이 침전되어 퇴적물이 적갈색을 띠게 되었다. 이 지역의 적갈색 점토-실트는 한반도 타지역 풍성퇴적물과 광물학적 및 지화학적 특성을 공유하므로 풍성퇴적물로 추정되지만, 이에 대해서는 퇴적물 연대측정이나 동위원소 분석 등의 추가 검증이 필요하다.